Will “Control Room Operator” be Replaced By Robots? 🤔
74% Chance of Automation
“Control Room Operator” will maybe be replaced by robots.
This job is ranked #407 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Set up, operate, and maintain the electronic equipment used to transmit radio and television programs. Control audio equipment to regulate volume level and quality of sound during radio and television broadcasts. Operate transmitter to broadcast radio or television programs.
Job Details
- The SOC (Standard Occupational Classification) code is 27-4012.00
- The Mean Annual Wage in the U.S. is $ 45,430.00
- The Mean Hourly Wage is $ 21.00
- Currently, there are 30,330 people on this job
☝️ Information based on the reference occupation “Broadcast Technicians”.
Also Known As…
- Broadcast Technicians
- Production Assistant
- Master Control Supervisor
- Master Control Operator (MCO)
- Engineer
- Broadcast Technician
- Broadcast Operations Engineer
- Broadcast Maintenance Engineer
- Broadcast Engineer
- Board Operator
- Audio Engineer
- Wire Photo Operator
- Videotape Operator
- Videographer
- Video Operator
- Video Control Engineer
- Transmitter Supervisor
- Transmitter Operator
- Transmitter Engineer
- Transmission Operator
- Transmission Engineer
- Television Technician
- Television Operator
- Television Engineer
- Television Audio Engineer
- Telecine Operator
- Telecasting Technician
- Telecasting Engineer
- Technical Testing Engineer
- Technical Operator
- Technical Director
- Studio Technician
- Studio Operation Engineer
- Studio Engineer
- Studio Coordinator
- Studio Control Operator
- Station Engineer
- Staff Engineer
- Special Effects Technician
- Sound Technician
- Sound Person
- Sound Mixer
- Sound Effects Technician
- Sound Effects Manager
- Sound Controller
- Signal Engineer
- Remote Broadcast Technician
- Remote Broadcast Engineer
- Reliability Technicians
- Records and Tape Recordings Engineer
- Radio/TV Technician (Radio/Television Technician)
- Radio Technician
- Radio Station Engineer
- Radio Station Audio Engineer
- Radio Engineer
- Radio Board Operator
- Projection Engineer
- Program Scheduler
- Program Clerk
- Production Manager
- Production Editor
- Operator Technician
- Operations Technician
- Operations Manager
- Operating Engineer
- Newscast Director
- News Gathering Technician
- Mixer Operator
- Microphone Operator
- Master Control Engineer
- Maintenance Engineer
- Field Technician
- Field Engineer
- Facsimile Operator
- Engineering Technician
- Engineering Operator
- Engineering Director
- Engineering and Operations Director
- Electronics Technician
- Custom Studio Coordinator
- Control Supervisor
- Control Room Technician
- Control Operator
- Control Engineer
- Computer Engineer
- Color Technician
- Chyron Operator
- Cable Television Access Coordinator
- Broadcast Operations Technician
- Broadcast Maintenance Technician
- Broadcast Field Supervisor
- Audio/Video Technician
- Audio Technician
- Audio Operator
- Assistant Engineer
- Access Coordinator
Tasks for “Control Room Operator”
- Instruct trainees in how to use television production equipment, how to film events, and how to copy and edit graphics or sound onto videotape.
- Give technical directions to other personnel during filming.
- Preview scheduled programs to ensure that signals are functioning and programs are ready for transmission.
- Schedule programming or read television programming logs to determine which programs are to be recorded or aired.
- Observe monitors and converse with station personnel to determine audio and video levels and to ascertain that programs are airing.
- Substitute programs in cases where signals fail.
- Install broadcast equipment, troubleshoot equipment problems, and perform maintenance or minor repairs, using hand tools.
- Monitor strength, clarity, and reliability of incoming and outgoing signals and adjust equipment as necessary to maintain quality broadcasts.
- Maintain programming logs as required by station management and the Federal Communications Commission.
- Discuss production requirements with clients.
- Align antennae with receiving dishes to obtain the clearest signal for transmission of broadcasts from field locations.
- Make commercial dubs.
- Record sound onto tape or film for radio or television, checking its quality and making adjustments where necessary.
- Edit broadcast material electronically, using computers.
- Regulate the fidelity, brightness, and contrast of video transmissions, using video console control panels.
- Determine the number, type, and approximate location of microphones needed for best sound recording or transmission quality and position them appropriately.
- Design and modify equipment to employer specifications.
- Set up and operate portable field transmission equipment outside the studio.
- Organize recording sessions and prepare areas, such as radio booths and television stations, for recording.
- Report equipment problems, ensure that repairs are made, and make emergency repairs to equipment when necessary and possible.
- Control audio equipment to regulate the volume and sound quality during radio and television broadcasts.
- Set up, operate, and maintain broadcast station computers and networks.
- Prepare reports outlining past and future programs, including content.
- Select sources from which programming will be received or through which programming will be transmitted.
- Play and record broadcast programs using automation systems.
- Produce graphics for broadcasts.
- Monitor and log transmitter readings.
- Produce educational and training films and videotapes by performing activities, such as selecting equipment and preparing scripts.
- Develop employee work schedules.
Related Technology & Tools
- Audio mixer consoles
- Digital video cameras
- Integrated receiver decoders IRD
- Video consoles
- Network routers
- Non-linear editing systems
- Wired microphones
- Satellite receivers
- Frame synchronizers
- Video servers
- Desktop computers
- Audio patch bays
- Digital audio recorders
- Vision mixers
- Video editing equipment
- Studio lighting
- Master control switchers
- Signal transmitters
- Modulators
- Laptop computers
- Video teleconferencing systems
- Videotape machines
- Digital video disk DVD recorders
- Video patch bays
- Personal computers
- Satellite vans
- Waveform monitors
- Vector scopes
- Spectrum analyzers
- Disk storage systems
- Robotic studio cameras
- Sound effect generators
- Apple Final Cut Pro
- Data entry software
- Email software
- Linux
- Microsoft Word
- UNIX
- Microsoft PowerPoint
- Adobe Systems Adobe Premiere Pro
- Video encoder software
- Adobe Systems Adobe InDesign
- Character generator software
- Video decoder software
- Adobe Systems Adobe Illustrator
- Adobe Systems Adobe Photoshop
- Adobe Systems Adobe After Effects
- Avid Technology
- Word processing software
- Microsoft Office
- Microsoft Excel
- Cisco IOS
- Autodesk AutoCAD
- Dassault Systemes CATIA
- Microsoft Windows