Will “Fire Control System Installer” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Lay out, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2152.01
☝️ Information based on the reference occupation “Pipe Fitters and Steamfitters”.
Also Known As…
- Pipe Fitters and Steamfitters
- Steamfitter
- Sprinkler Fitter
- Pipefitter
- Pipe Welder
- Pipe Fitter
- Machine Repairman
- Journeyman Pipefitter
- Journeyman Pipe Fitter
- Fire Sprinkler Service Technician
- Equipment Service Associate (ESA)
- Water Regulator and Valve Repairer
- Water Pipe Installer
- Water Meter Installer
- Water Mechanic
- Water Hydrant Installer
- Steamfitter Apprentice
- Steam Trap Worker
- Steam Trap Man
- Steam Service Inspector
- Steam Pipe Fitter
- Steam Heating Installer
- Sprinkling System Installer
- Sprinkler Installer
- Sprinkler Fitter Apprentice
- Service Technician
- Plumbing Technician
- Plumbing Installer
- Plumber and Tinner
- Piping Designer
- Pipe or Steam Fitter Furnace Installer
- Pipe Fitter Apprentice
- Meter Setter
- Marine Steam Fitter
- Marine Plumber
- Marine Pipefitter
- Manhole and Underground Steamline Inspector
- Locomotive Pipe Fitter
- Irrigation Technician
- Irrigation System Installer
- Instrument Fitter
- Industrial Gas Fitter
- Hydraulic Plumber
- Hydrant Setter
- Heating Unit Installer
- Green Pipefitter
- Gas Plumber
- Gas Pipe Layer
- Gas or Water Meter Installer
- Gas Main Fitter
- Gas Line Servicer
- Gas Line Repairer
- Gas Line Installer
- Gas Fitter Apprentice
- Gas Fitter
- Fitter
- Fire Sprinkler Installer
- Fire Hydrant Mechanic
- Diesel Engine Pipe Fitter
- Corrosion Control Fitter
- Coppersmith Apprentice
- Coppersmith
- Aircraft Plumbing and Hydraulic Mechanic
- Aircraft Hydraulic Equipment Mechanic
- Air Conditioning Installer
Tasks for “Fire Control System Installer”
- Install pipe systems to support alternative energy-fueled systems, such as geothermal heating and cooling systems.
- Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
- Modify, clean, or maintain pipe systems, units, fittings, or related machines or equipment, using hand or power tools.
- Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
- Operate motorized pumps to remove water from flooded manholes, basements, or facility floors.
- Inspect work sites for obstructions or holes that could cause structural weakness.
- Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications.
- Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
- Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
- Measure and mark pipes for cutting or threading.
- Install fixtures, appliances, or equipment designed to reduce water or energy consumption.
- Plan pipe system layout, installation, or repair, according to specifications.
- Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic or electrolytic action.
- Shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
- Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints.
- Install or test gray water systems, such as recycling, treatment, or irrigation systems.
- Remove and replace worn components.
- Cut or bore holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools.
- Prepare cost estimates for clients.
- Install automatic controls to regulate pipe systems.
Related Technology & Tools
- Pulleys
- Pry bars
- Box end wrenches
- Alternating current AC welding equipment
- Water samplers
- Angle air grinders
- Pressure gauges
- Heat guns
- Air wire brushes
- Propane torches
- Screwdrivers
- Utility knives
- Split bubble levels
- Roll groovers
- Skip loaders
- Plumb bobs
- Ball peen hammers
- Adjustable wrenches
- Flat head screwdrivers
- Jackhammers
- Hole cutting tools
- Reciprocating saws
- Laser levels
- Chain wrenches
- Pipe vises
- Tirfors
- Water stoppers
- Pedestal grinders
- Hydraulic valve turners
- Metal inert gas MIG welders
- Desktop computers
- Tungsten inert gas TIG welding equipment
- Power hammers
- Bolt cutters
- Air-acetylene torches
- Framing squares
- Impact wrenches
- Air operated grinders
- Two-hole pins
- Hydraulic cranes
- Scaffolding
- Pipe bending mandrels
- Drill presses
- Pipe threaders
- Transit levels
- Offset grinders
- Wire tracers
- Metal cutting taps
- Reamers
- Pipe fabrication shears
- Deburring tools
- Pipe cutters
- Pipe wrenches
- Stands
- Truck cranes
- Stationary grinders
- Pavement stompers
- Welding clamps
- Hole saws
- Soldering equipment
- Explosimeters
- Hammers
- Manual pipe benders
- Combination squares
- Forklifts
- Loaders
- Phillips head screwdrivers
- Pipe flaring tools
- Polyvinyl chloride PVC cutters
- Portable grinders
- Nylon strap wrenches
- Laser printers
- Quality control QC welders' gauges
- Personal computers
- Portable welding machines
- Torch cutter guides
- Pipe flange aligners
- Material-hoisting slings
- Tuggers
- Levels
- Backhoes
- Allen wrenches
- Calipers
- Metal hand saws
- Manlifts
- Magnetic circle layout tools
- Pipe bending tools
- Augers
- Oxyacetylene welding equipment
- Hand tachometers
- Pipe threading machines
- Leak-testing gauges
- Pit depth gauges
- Drophead dies
- Welding hoods
- Block and tackle equipment
- Hand hacksaws
- Centering head tools
- Circular saws
- Hydrostatic testers
- Power drills
- Trenchers
- Water pumps
- Cold chisels
- Mud pumps
- Flow gauges
- Null locators
- Measuring tapes
- Basin wrenches
- Air compressors
- Rasps
- Plasma cutting guides
- Amp meters
- Chain falls
- Notebook computers
- Shielded arc welding tools
- Dumpy levels
- Crescent wrenches
- Cutting torches
- Monkey wrench sets
- Metal cutting dies
- Power hacksaws
- Ohmmeters
- Ladders
- Locking pliers
- Pipeline jacks
- Automatic levels
- Jam-proof ratchet threaders
- Generators
- Slip joint pliers
- Pocket levels
- Pneumatic wire brushes
- Pneumatic pipe bevelers
- Impact screwdrivers
- Winches
- Vertical bandsaws
- Pipe lasers
- Direct current DC arc welder
- Radius markers
- Single-cut mill saw files
- Safety harnesses
- Bentley Systems AutoPIPE
- AEC Design Group CADPIPE
- Piping construction costs estimation software
- Microsoft Office
- COADE CAESAR II
- Computer aided design CAD software
- Email software
- Internet browser software
- Microsoft Excel
- PipingOffice
- Word processing software
- Watter Hammer Software Hytran
- ViziFlow
- Pipepro Pipefitting