-
Adjust or align headlights, wheels, and brake systems.
-
Remove small pits and dimples in body metal, using pick hammers and punches.
-
Apply heat to plastic panels, using hot-air welding guns or immersion in hot water, and press the softened panels back into shape by hand.
-
Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling.
-
Follow supervisors' instructions as to which parts to restore or replace and how much time the job should take.
-
Replace damaged glass on vehicles.
-
Soak fiberglass matting in resin mixtures and apply layers of matting over repair areas to specified thicknesses.
-
File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools.
-
Clean work areas, using air hoses, to remove damaged material and discarded fiberglass strips used in repair procedures.
-
Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders.
-
Cut openings in vehicle bodies for the installation of customized windows, using templates and power shears or chisels.
-
Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete.
-
Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint.
-
Fit and secure windows, vinyl roofs, and metal trim to vehicle bodies, using caulking guns, adhesive brushes, and mallets.
-
Measure and mark vinyl material and cut material to size for roof installation, using rules, straightedges, and hand shears.
-
Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components.
-
Mix polyester resins and hardeners to be used in restoring damaged areas.
-
Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers.
-
Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools.
-
Remove damaged panels, and identify the family and properties of the plastic used on a vehicle.
-
Remove damaged sections of vehicles using metal-cutting guns, air grinders and wrenches, and install replacement parts using wrenches or welding equipment.
-
Prime and paint repaired surfaces, using paint sprayguns and motorized sanders.
-
Read specifications or confer with customers to determine the desired custom modifications for altering the appearance of vehicles.
-
Review damage reports, prepare or review repair cost estimates, and plan work to be performed.
-
Fill small dents that cannot be worked out with plastic or solder.