-
Install, repair, or replace safety glass and related materials, such as back glass heating elements, on vehicles or equipment.
-
Select appropriate tools, safety equipment, and parts, according to job requirements.
-
Install rubber channeling strips around edges of glass or frames to weatherproof windows or to prevent rattling.
-
Hold cut or uneven edges of glass against automated abrasive belts to shape or smooth edges.
-
Cut flat safety glass according to specified patterns or perform precision pattern making and glass cutting to custom fit replacement windows.
-
Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
-
Obtain windshields or windows for specific automobile makes and models from stock and examine them for defects prior to installation.
-
Replace or adjust motorized or manual window-raising mechanisms.
-
Prime all scratches on pinchwelds with primer and allow to dry.
-
Remove moldings, clips, windshield wipers, screws, bolts, and inside A-pillar moldings and lower headliners in preparation for installation or repair work.
-
Install replacement glass in vehicles.
-
Install new foam dams on pinchwelds, if required.
-
Apply a bead of urethane around the perimeter of each pinchweld and dress the remaining urethane on the pinchwelds so that it is of uniform level and thickness.
-
Remove broken or damaged glass windshields or window glass from motor vehicles, using hand tools to remove screws from frames holding glass.
-
Cool or warm glass in the event of temperature extremes.
-
Remove all dirt, foreign matter, and loose glass from damaged areas, apply primer along windshield or window edges, and allow primer to dry.
-
Allow all glass parts installed with urethane ample time to cure, taking temperature and humidity into account.
-
Replace all moldings, clips, windshield wipers, or other parts that were removed prior to glass replacement or repair.