Will “Earth Auger Operator” be Replaced By Robots? 🤔
85% Chance of Automation
“Earth Auger Operator” will probably be replaced by robots.
This job is ranked #488 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate a variety of drills such as rotary, churn, and pneumatic to tap sub-surface water and salt deposits, to remove core samples during mineral exploration or soil testing, and to facilitate the use of explosives in mining or construction. May use explosives. Includes horizontal and earth boring machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-5021.00
- The Mean Annual Wage in the U.S. is $ 51,240.00
- The Mean Hourly Wage is $ 24.00
- Currently, there are 18,500 people on this job
☝️ Information based on the reference occupation “Earth Drillers, Except Oil and Gas”.
Also Known As…
- Earth Drillers, Except Oil and Gas
- Well Driller
- Rock Drill Operator
- Overburden Drill Operator
- Highwall Drill Operator
- Hard Rock Drill Operator
- Driller
- Drill Operator
- Blasting Production Technician
- Blaster
- Blast Hole Driller
- Well Testing Operator
- Well Driller Helper
- Well Drill Operator
- Well Digger
- Water Well Driller
- Wash Driller
- Wagoner
- Wagon Driller
- Wagon Drill Operator
- Tunneling Machine Operator
- Test Driller
- Test Borer
- Stoper
- Soil Sampler
- Shot Core Drill Operator
- Raise Driller
- Post Hole Digging Machine Operator
- Post Hole Digger
- Operating Engineer
- Mine Equipment Operator
- Machine Driller
- Jumper
- Hydraulic Rock Drill Operator
- Horizontal Earth Boring Machine Operator
- Horizontal Drill Operator
- Hole Digger Operator
- Heavy Equipment Operator
- Ground Water Contractor
- Geothermal Operating Engineer
- Geotechnical Operating Engineer
- Foundation Drill Operator
- Explosive Bore Hole Driller
- Environmental Sampler
- Electric Drill Operator
- Earth Boring Machine Operator
- Drilling Machine Runner
- Drilling Machine Operator
- Drill Runner
- Drill Hand
- Directional Driller
- Diamond Driller
- Deep Well Contractor
- Core Sampler
- Core Driller
- Core Drill Operator
- Construction Driller
- Coal Mine Bore Hole Drill Operator
- Churn Driller
- Churn Drill Operator
- Boring Machine Operator
- Auger Operator
Tasks for “Earth Auger Operator”
- Start, stop, and control drilling speed of machines and insertion of casings into holes.
- Observe electronic graph recorders and flow meters that monitor the water used to flush debris from holes.
- Operate hoists to lift power line poles into position.
- Assemble and position machines, augers, casing pipes, and other equipment, using hand and power tools.
- Retrieve lost equipment from bore holes, using retrieval tools and equipment.
- Disinfect, reconstruct, and redevelop contaminated wells and water pumping systems, and clean and disinfect new wells in preparation for use.
- Pour water into wells, or pump water or slush into wells to cool drill bits and to remove drillings.
- Verify depths and alignments of boring positions.
- Monitor drilling operations, checking gauges and listening to equipment to assess drilling conditions and to determine the need to adjust drilling or alter equipment.
- Select and attach drill bits and drill rods, adding more rods as hole depths increase, and changing drill bits as needed.
- Inspect core samples to determine nature of strata, or take samples to laboratories for analysis.
- Withdraw drill rods from holes, and extract core samples.
- Drill or bore holes in rock for blasting, grouting, anchoring, or building foundations.
- Select the appropriate drill for the job, using knowledge of rock or soil conditions.
- Fabricate well casings.
- Record drilling progress and geological data.
- Perform pumping tests to assess well performance.
- Place and install screens, casings, pumps, and other well fixtures to develop wells.
- Regulate air pressure, rotary speed, and downward pressure, according to the type of rock or concrete being drilled.
- Perform routine maintenance and upgrade work on machines and equipment, such as replacing parts, building up drill bits, and lubricating machinery.
- Operate water-well drilling rigs and other equipment to drill, bore, and dig for water wells or for environmental assessment purposes.
- Retract augers to force discharge dirt from holes.
- Operate controls to stabilize machines and to position and align drills.
- Document geological formations encountered during work.
- Operate machines to flush earth cuttings or to blow dust from holes.
- Review client requirements and proposed locations for drilling operations to determine feasibility, and to determine cost estimates.
- Drive trucks, tractors, or truck-mounted drills to and from work sites.
- Drive or guide truck-mounted equipment into position, level and stabilize rigs, and extend telescoping derricks.
- Design well pumping systems.
- Signal crane operators to move equipment.
Related Technology & Tools
- Water level meters
- Precision levels
- Trenchers
- Downhole well testing equipment
- Bobcats
- Adjustable combination wrenches
- Alternating current AC generators
- Mud pumping equipment
- Water sampling bailers
- Global positioning system GPS receivers
- Tablet computers
- Truck-mounted water pumps
- Water test kits
- Pipe retrieval fishing tools
- Desanders
- Portable air compressors
- Personal computers
- Backhoe-equipped tractors
- Air rotary drills
- Shale shakers
- Chain slings
- Digital video cameras
- Drill pipe tongs
- Handheld remote thermometers
- Grout pumps
- Work trucks
- Core drill rigs
- Truck mounted cranes
- Lube guns
- Rotary drilling tools
- Mud guns
- Water monitoring samplers
- Marsh funnels
- Downhole hammers
- Water logging tools
- Mud balances
- Cable tool drills
- Mud mixers
- Power augers
- Drilling collars
- Field forklifts
- Earth drilling machines
- Submerged arc welding tools
- Mud rotary drills
- Laptop computers
- Microsoft Excel
- Data entry software
- Microsoft Word
- Microsoft Office
- Global positioning system GPS software