Will “Shale Planer Operator” be Replaced By Robots? 🤔
59% Chance of Automation
“Shale Planer Operator” will maybe be replaced by robots.
This job is ranked #327 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate machinery such as longwall shears, plows, and cutting machines to cut or channel along the face or seams of coal mines, stone quarries, or other mining surfaces to facilitate blasting, separating, or removing minerals or materials from mines or from the Earth's surface. Includes shale planers.
Job Details
- The SOC (Standard Occupational Classification) code is 47-5042.00
- The Mean Annual Wage in the U.S. is $ 50,670.00
- The Mean Hourly Wage is $ 24.00
- Currently, there are 5,930 people on this job
☝️ Information based on the reference occupation “Mine Cutting and Channeling Machine Operators”.
Also Known As…
- Mine Cutting and Channeling Machine Operators
- Underground Miner
- Underground Heavy Equipment Operator
- Shearer Operator
- Shear Operator
- Miner Operator
- Longwall Shearer Operator
- Coal Miner
- Bore Miner Operator
- Underground Foreman
- Under Cutter
- Surface Miner
- Shale Miner
- Remote Continuous Mining Machine Operator
- Quarry Equipment Operator
- Plane Tender
- Plane Runner
- Mine Cutting and Channeling Machine Operator
- Mine Cutting and Channeling Machine Copper Miner
- Mine Cutting and Channeling Machine Company Miner
- Mine Cutting and Channeling Machine Coal Miner
- Mine Cutting and Channeling Machine Clay Miner
- Machine Driller
- Machine Cutter
- Longwall Foreman
- Long Wall Shear Operator
- Long Wall Mining Machine Tender
- Heavy Machinery Operator
- Flame Channeler
- Drilling Machine Operator
- Dozer Operator
- Cutter Operator
- Cutter
- Continuous Miner Operator (CMO)
- Coal Cutter
- Clay Miner
- Clay Mine Cutting Machine Operator
- Channeling Machine Runner
- Channeler Runner
- Channel Machine Operator
Tasks for “Shale Planer Operator”
- Drive mobile, truck-mounted, or track-mounted drilling or cutting machine in mines and quarries or on construction sites.
- Cut entries between rooms and haulage ways.
- Move controls to start and position drill cutters or torches and advance tools into mines or quarry faces to complete horizontal or vertical cuts.
- Signal that machine plow blades are properly positioned, using electronic buzzers or two-way radios.
- Monitor movement of shale along conveyors from hoppers to trucks or railcars.
- Guide and assist crews in laying track for machines and resetting planer rails, supports, and blocking, using jacks, shovels, sledges, picks, and pinch bars.
- Move planer levers to control and adjust the movement of equipment, the speed, height, and depth of cuts, and to rotate swivel cutting booms.
- Signal truck drivers to position their vehicles for receiving shale from planer hoppers.
- Position jacks, timbers, or roof supports, and install casings, to prevent cave-ins.
- Observe indicator lights and gauges, and listen to machine operation to detect binding or stoppage of tools or other equipment problems.
- Cut and move shale from open pits.
- Determine locations, boundaries, and depths of holes or channels to be cut.
- Signal crew members to adjust the speed of equipment to the rate of installation of roof supports, and to adjust the speed of conveyors to the volume of coal.
- Replace worn or broken tools and machine bits and parts, using wrenches, pry bars, and other hand tools, and lubricate machines, using grease guns.
- Free jams in planer hoppers, using metal pinch bars.
- Reposition machines and move controls to make additional holes or cuts.
- Press buttons to activate conveyor belts, and push or pull chain handles to regulate conveyor movement so that material can be moved or loaded into dinkey cars or dump trucks.
- Advance plow blades through coal strata by remote control, according to electronic or radio signals from the tailer.
- Charge and set off explosives in blasting holes.
- Remove debris such as loose shale from channels and planer travel areas.
- Cut slots along working faces of coal, salt, or other non-metal deposits to facilitate blasting, by moving levers to start the machine, and to control the vertical reciprocating drills.
Related Technology & Tools
- Detonation units
- Integrated air velocity monitors
- Atmospheric monitors
- Heavy dump trucks
- Tunneling machines
- Raise bores
- Miner's helmets
- Longwall shears
- Portable hand grinders
- Screw jacks
- Self-rescuers
- Protective goggles
- Jackhammers
- Cutting torches
- Grinding mills
- Mining bulldozers
- Armored face conveyors
- Cone crushing equipment
- Roadheaders
- Channeling machines
- Cutting machines
- Methane monitors
- Pinch bars
- Power shovels
- Scissor bolters
- Ultrasonic anemometers
- Hydraulic jacks
- Protective ear muffs
- Mining picks
- Mobile radios
- Mining shovels
- Shuttle cars
- Adjustable combination wrenches
- Burning bars
- Tractor drills
- Lube guns
- Pry bars
- Personal computers
- Mine conveyor belts
- Electric chainsaws
- Continuous miners
- Rock drilling machines
- Crowbars
- Jaw crushing equipment
- Microsoft Excel
- National Institute for Occupational Safety and Health Analysis of Roof Bolt Systems ARBS
- Joy Mining Machinery JOY FACEBOSS
- National Institute for Occupational Safety and Health Analysis of Longwall Pillar Stability ALPS