Will “Tire Man” be Replaced By Robots? 🤔
70% Chance of Automation
“Tire Man” will maybe be replaced by robots.
This job is ranked #384 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Repair and replace tires.
Job Details
- The SOC (Standard Occupational Classification) code is 49-3093.00
- The Mean Annual Wage in the U.S. is $ 27,150.00
- The Mean Hourly Wage is $ 13.00
- Currently, there are 109,350 people on this job
☝️ Information based on the reference occupation “Tire Repairers and Changers”.
Also Known As…
- Tire Repairers and Changers
- Tire Technician
- Tire Shop Mechanic
- Tire Repairer
- Tire Installer
- Tire Changer
- Tire Center Supervisor
- Tire Buster
- Service Technician
- Lube Technician
- Alignment Technician
- Tire Worker
- Tire Servicer
- Tire Mounter
- Tire Mechanic
- Tire Groover
- Tire Fixer
- Tire Balancer
- Automotive Tire Worker (Auto Tire Worker)
Tasks for “Tire Man”
- Remount wheels onto vehicles.
- Clean sides of whitewall tires.
- Order replacements for tires or tubes.
- Inspect tire casings for defects, such as holes or tears.
- Rotate tires to different positions on vehicles, using hand tools.
- Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting.
- Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.
- Glue tire patches over ruptures in tire casings, using rubber cement.
- Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools.
- Patch tubes with adhesive rubber patches or seal rubber patches to tubes, using hot vulcanizing plates.
- Roll new rubber treads, known as camelbacks, over tire casings and mold the semi-raw rubber treads onto the buffed casings.
- Buff defective areas of inner tubes, using scrapers.
- Inflate inner tubes and immerse them in water to locate leaks.
- Reassemble tires onto wheels.
- Clean and tidy up the shop.
- Apply rubber cement to buffed tire casings prior to vulcanization process.
- Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries.
- Place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion.
- Hammer required counterweights onto rims of wheels.
- Identify tire size and ply and inflate tires accordingly.
- Place wheels on balancing machines to determine counterweights required to balance wheels.
- Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools.
- Replace valve stems and remove puncturing objects.
- Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers.
- Raise vehicles, using hydraulic jacks.
- Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.
Related Technology & Tools
- Torque wrenches
- Utility knives
- Insulated heater knives
- Hand rollers for adhesives
- Tire irons
- Heavy duty awls
- Tire hammers
- Safety gloves
- Scrapers
- Hydraulic jacks
- Tire plug guns
- Air spray guns
- Respirators
- Truck tire spoons
- Tire stands
- Hammers
- 4-way tire valve tools
- Safety shoes
- Curved-point scalpel knives
- Stickleback rasps
- Wire brushes
- Deburring tools
- Lug wrenches
- Thermocutters
- Taper point knives
- Vulcanizing machines
- Tire probing awls
- Rubber patch guns
- Bead seaters
- Holding clamps
- Heavy duty T-handle spiral probe cement tools
- Hydraulic pumps
- Inner-liner scrapers
- Hand rasps
- Tire knockers
- Airless spray guns
- Mechanical tire changers
- Mold presses
- Duck-billed bead-breaking wedges
- Tire tread depth gauges
- Shears
- Personal computers
- Rim clamp tire changers
- Bail cutting knives
- Notched-blade trim knives
- Power grinders
- Handheld extruders
- Pricking awls
- Air drills
- Workshop cranes
- Pneumatic wrenches
- Truck lock ring removers
- Power tire spreaders
- Hawk bill knives
- Electric knife heaters
- Mill knives
- Razor knives
- Mallets
- Power hoists
- Cutting blades
- Jacks
- Heavy duty T-handle reamers
- Bead breakers
- Square point knives
- Eye protection
- Buffers
- Bead expanders
- Fast-trim vent knives
- Air/steam bags
- Desktop computers
- Balancing machines
- Scissors
- Tire reamers
- Insertion tools
- Hot vulcanizing plates
- Awls
- Hub-cap pullers
- Trimmer shears
- Regroovers
- Computerized tire/wheel balancing equipment
- Microsoft Excel
- Accounting software
- Recordkeeping software
- Project estimation software