Will “Automated Equipment Engineer-Technician” be Replaced By Robots? 🤔
59% Chance of Automation
“Automated Equipment Engineer-Technician” will maybe be replaced by robots.
This job is ranked #325 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Install, dismantle, or move machinery and heavy equipment according to layout plans, blueprints, or other drawings.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9044.00
- The Mean Annual Wage in the U.S. is $ 53,950.00
- The Mean Hourly Wage is $ 25.00
- Currently, there are 39,670 people on this job
☝️ Information based on the reference occupation “Millwrights”.
Also Known As…
- Millwrights
- Precision Millwright
- Millwright Instructor
- Millwright
- Maintenance Millwright
- Maintenance Mechanic
- Plant Changer
- Mover
- Millwright Apprentice
- Manufacturing Millwright
- Manufacturer's Service Representative
- Machinery Rigger
- Machinery Mover
- Machinery Erector
- Machinery Dismantler
- Machine Setter
- Machine Set Up Operator
- Machine Rigger
- Machine Mover
- Machine Installer
- Machine Erector
- Installation Service Representative
- Industrial Machine Assembler
- Gear Repairer
- Field Service Technician
- Construction Millwright
- Automobile Equipment Technician Engineer
- Automobile Equipment Engineer Technician
- Automated Equipment Engineering Technician
Tasks for “Automated Equipment Engineer-Technician”
- Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
- Lay out mounting holes, using measuring instruments, and drill holes with power drill.
- Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment.
- Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
- Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
- Weld, repair, and fabricate equipment or machinery.
- Assemble and install equipment, using hand tools and power tools.
- Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures.
- Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
- Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
- Replace defective parts of machine or adjust clearances and alignment of moving parts.
- Move machinery and equipment, using hoists, dollies, rollers, and trucks.
- Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
- Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.
- Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
- Install robot and modify its program, using teach pendant.
- Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.
- Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
- Level bedplate and establish centerline, using straightedge, levels, and transit.
- Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
- Conduct preventative maintenance and repair, and lubricate machines and equipment.
- Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
- Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
Related Technology & Tools
- Welding shields
- Adjustable wrenches
- Depth micrometers
- Grease guns
- Inside calipers
- Tuggers
- Outside calipers
- Torque wrenches
- Taper plug gauges
- Surface grinding machines
- Bucket pumps
- Water levels
- Spanner wrenches
- Transit levels
- Drafting compasses
- Welding electrode holders
- Gage blocks
- Steel hammers
- Strap wrenches
- Vernier calipers
- Dial indicators
- Layout templates
- Honing stones
- Telescoping gauges
- Snap ring pliers
- Taper gauges
- Outside micrometers
- Box end wrenches
- Power chippers
- Drill presses
- Wire brushes
- Power grinders
- Rivet guns
- Hydraulic cranes
- Chain wrenches
- Chain falls
- Utility knives
- End mills
- Power press brakes
- Trammel points
- Reamers
- Soldering irons
- Air compressors
- Needlenose pliers
- Protractors
- Metal cutting taps
- Ratchet jacks
- Screw jacks
- Depth gauges
- Soft face hammers
- Plumb bobs
- Bearing heaters
- Putty knives
- Oxyacetylene torches
- Pipe threading machines
- Gear lube dispensers
- Magnetic drill presses
- Dollies
- Nibblers
- Carpenters' levels
- Micrometers
- Power drills
- Dividers
- Gear shapers
- Hydraulic jacks
- Lubrication guns
- Pyrometers
- Thread gauges
- Vertical milling machines
- Chipping hammers
- Welding ground clamps
- Scissors
- Optical squares
- Sheave gauges
- Pry bars
- Turning lathes
- Snap gauges
- Overhead hoists
- Gear pullers
- Tube cutters
- Hammer drills
- Gasket cutters
- Flare nut wrenches
- Transformer welding machines
- Ladders
- Combination wrenches
- Cold chisels
- Cable cutters
- Welding gloves
- Protective ear muffs
- Radius gauges
- Bevel protractors
- Electronic levels
- Drift pins
- Center punches
- Tap extractors
- Dead-blow hammers
- Precision levels
- Pneumatic needle scalers
- Transfer pumps
- Safety goggles
- Plasma welders
- Chain hoists
- Forklifts
- Hydraulic press frames
- Steel squares
- Hole punches
- Pipe cutters
- Belt sanders
- Bandsaws
- Round files
- Precision files
- Soldering guns
- Pipe wrenches
- Brass hammers
- Laser levels
- Core drills
- Retaining ring pliers
- Combination squares
- Cutoff saws
- Angled feeler gauges
- Material-hoisting slings
- Diagonal cutting pliers
- Hoisting hooks
- Tachometers
- Socket wrench sets
- Scaffolding
- Crowbars
- Nut splitters
- Scrapers
- Cylinder hones
- Torque multipliers
- Planing machines
- Stroboscopes
- Hand clamps
- Dial calipers
- Chain cutters
- Sharpening equipment
- Claw hammers
- Personal computers
- Inspection mirrors
- Arbor presses
- Shaft key wrenches
- Ball peen hammers
- Metal cutting dies
- Shielded arc welding tools
- Small hole gauges
- Transfer punches
- Inside micrometers
- Comealongs
- Teach pendants
- Alignment telescopes
- Metal inert gas MIG welders
- Pneumatic weld flux chippers
- Measuring tapes
- Tin snips
- Tension gauges
- Ultrasonic thickness detectors
- Flat files
- Workshop bench vises
- Parallel blocks
- Straightedges
- Vibration indicators
- Height gauges
- Keyway broaches
- Block and tackle equipment
- Power saws
- Bearing pullers
- Filler pumps
- Overhead cranes
- Spot welding equipment
- Prick punches
- Handtrucks
- Gas-powered generators
- Packing pullers
- Table saws
- Shrink rules
- Jig saws
- Hydraulic pumps
- Respirators
- Spiral screw extractors
- Allen wrenches
- Scribers
- Pulleys
- Tungsten inert gas TIG welding equipment
- Microsoft Excel
- Microsoft Word
- Computer aided design CAD software
- Dassault Systems SOLIDWORKS
- Microsoft Office
- Autodesk AutoCAD
- SAP