Will “Pneumatic Tool Operator” be Replaced By Robots? 🤔
41% Chance of Automation
“Pneumatic Tool Operator” will probably not be replaced by robots.
This job is ranked #275 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Fabricate, position, align, and fit parts of structural metal products.
Job Details
- The SOC (Standard Occupational Classification) code is 51-2041.00
- The Mean Annual Wage in the U.S. is $ 40,000.00
- The Mean Hourly Wage is $ 19.00
- Currently, there are 77,270 people on this job
☝️ Information based on the reference occupation “Structural Metal Fabricators and Fitters”.
Also Known As…
- Structural Metal Fabricators and Fitters
- Welder-Fabricator
- Weld Technician
- Tack Welder
- Structural Steel Fitter
- Ship Fitter
- Mill Beam Fitter
- Layout Man
- Fitter, Welder
- Fitter
- Fabricator
- Weld Fitter
- Structural Fitter
- Structural and Ornamental Metalwork Steel Fabricator
- Structural and Ornamental Metalwork Metal Fabricator
- Steelworker
- Steel Fabricator
- Ship Propeller Finisher
- Protector Plate Attacher
- Precision Structural Metal Fitter
- Ornamental Metal Worker Apprentice
- Ornamental Metal Worker
- Motorcycle Maker
- Motorcycle Fabricator
- Motorcycle Assembler
- Metal Framer
- Metal Fabricator Apprentice
- Metal Fabricator
- Metal Box Maker
- Hand Former
- Ground Support Equipment Assembler
- Fabricator Assembler Metal Products
- Cage Maker, Machine
Tasks for “Pneumatic Tool Operator”
- Preheat workpieces to make them malleable, using hand torches or furnaces.
- Direct welders to build up low spots or short pieces with weld.
- Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
- Set up face blocks, jigs, and fixtures.
- Straighten warped or bent parts, using sledges, hand torches, straightening presses, or bulldozers.
- Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
- Lift or move materials and finished products, using large cranes.
- Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
- Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
- Smooth workpiece edges and fix taps, tubes, and valves.
- Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches.
- Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
- Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
- Tack-weld fitted parts together.
- Heat-treat parts, using acetylene torches.
- Move parts into position, manually or with hoists or cranes.
- Mark reference points onto floors or face blocks and transpose them to workpieces, using measuring devices, squares, chalk, and soapstone.
- Hammer, chip, and grind workpieces to cut, bend, and straighten metal.
- Study engineering drawings and blueprints to determine materials requirements and task sequences.
- Erect ladders and scaffolding to fit together large assemblies.
- Install boilers, containers, and other structures.
- Design and construct templates and fixtures, using hand tools.
- Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
Related Technology & Tools
- Locking pliers
- Center punches
- Protractors
- Metal inert gas MIG welders
- Micrometers
- Pry bars
- Cutoff saws
- Flame cutters
- Ladders
- Power hacksaws
- Radial drills
- Personal computers
- Claw hammers
- Measuring tapes
- Beverly shears
- Hand clamps
- Straight screwdrivers
- Tracked bulldozers
- Jacks
- Computerized numerical control CNC press brakes
- Tack welding equipment
- Layout squares
- Milling machines
- Edge planers
- Tungsten inert gas TIG welding equipment
- Scaffolding
- Belt sanders
- Precision files
- Wedges
- Sledgehammers
- Surface gauges
- Unishears
- Scribers
- Power grinders
- Heating furnaces
- Forklifts
- Hand torches
- Drift pins
- Plasma cutters
- Computerized numerical control CNC metal-cutting machines
- Roll benders
- Turnbuckles
- Adjustable wrenches
- Brakes
- Paint spray guns
- Welding torches
- Drill presses
- Straightening presses
- Power chippers
- Vernier height gauges
- Hand torch welders
- Bench vises
- Punches
- Lathes
- Metal inert gas MIG welding equipment
- Radial arm saws
- End milling machines
- Dial indicators
- Transit levels
- Positioning jigs
- Rivet guns
- Magnetic drill presses
- Hand shears
- Overhead cranes
- Desktop computers
- Sine bars
- Power hoists
- Metal cutting taps
- Steel rules
- Dividers
- Reamers
- Computer aided design and drafting CADD software
- Word processing software
- Enterprise resource planning ERP software
- Spreadsheet software
- Data entry software
- Microsoft Excel