Will “Automatic Metal Spraying Machine Operator” be Replaced By Robots? 🤔

92% Chance of Automation

“Automatic Metal Spraying Machine Operator” will probably be replaced by robots.

This job is ranked #569 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces. Includes electrolytic processes.

Job Details

The SOC (Standard Occupational Classification) code is 51-4193.00
The Mean Annual Wage in the U.S. is $ 33,690.00
The Mean Hourly Wage is $ 16.00
Currently, there are 35,570 people on this job

☝️ Information based on the reference occupation “Plating and Coating Machine Setters, Operators, and Tenders, Metal and Plastic”.

Also Known As…

Tasks for “Automatic Metal Spraying Machine Operator”

Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
Read production schedules to determine setups of equipment and machines.
Operate hoists to place workpieces onto machine feed carriages or spindles.
Plate small objects such as nuts or bolts, using motor-driven barrels.
Suspend objects such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
Replace worn parts and adjust equipment components, using hand tools.
Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
Clean workpieces, using wire brushes.
Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
Perform equipment maintenance such as cleaning tanks and lubricating moving parts of conveyors.
Remove excess materials or impurities from objects, using air hoses or grinding machines.
Measure, mark, and mask areas to be excluded from plating.
Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
Cut metal or other materials, using shears or band saws.
Clean and maintain equipment, using water hoses and scrapers.
Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
Mix and test solutions, and turn valves to fill tanks with solutions.
Operate sandblasting equipment to roughen and clean surfaces of workpieces.
Inspect coated or plated areas for defects such as air bubbles or uneven coverage.
Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
Position and feed materials into processing machines, by hand or by using automated equipment.
Maintain production records.
Test machinery to ensure that it is operating properly.
Install gears and holding devices on conveyor equipment.
Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
Spray coating in specified patterns according to instructions.
Preheat workpieces in ovens.
Measure or weigh materials, using rulers, calculators, and scales.
Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.

Related Technology & Tools

Digital ammeters
Digital levels
Plating tank
Sand blasters
Floor jacks
Fixed workshop cranes
Chain hoists
Digital calipers
Pallet jacks
Metal inert gas MIG welders
Spin dryers
Thermo galvanometers
Digital micrometers
Wheeled forklifts
Bake ovens
Monorail conveyer systems

Computer aided design CAD software
Microsoft Excel
Microsoft Outlook
Autodesk AutoCAD
Oracle Advanced Procurement
Hazardous materials management HMS software
Microsoft Word