Will “Hand Carver” be Replaced By Robots? 🤔
92% Chance of Automation
“Hand Carver” will probably be replaced by robots.
This job is ranked #566 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
Job Details
- The SOC (Standard Occupational Classification) code is 51-7011.00
- The Mean Annual Wage in the U.S. is $ 34,800.00
- The Mean Hourly Wage is $ 16.00
- Currently, there are 97,980 people on this job
☝️ Information based on the reference occupation “Cabinetmakers and Bench Carpenters”.
Also Known As…
- Cabinetmakers and Bench Carpenters
- Woodworker
- Machine Operator
- Framer
- Frame Builder
- Double End Tenon Operator
- Cutter
- Cabinetmaker
- Cabinet Installer
- Cabinet Builder
- Cabinet Assembler
- Woodworking Machinist
- Woodworking Bench Carpenter
- Wood Ski Maker
- Wood Mechanist
- Wood Machinist
- Wood Furniture Assembler
- Wood Cabinetmaker
- Stock Checker
- Smoking Pipe Maker
- Sander
- Router Operator
- Pipe Organ Builder
- Marquetry Worker
- Mantel Craftsman
- Last Model Maker
- Inlayer
- Hat Block Maker
- Harpsichord Maker
- Harp Maker
- Hand Violin Maker
- Hand Fretted Instrument Maker
- Guitar Maker
- Furniture Maker
- Furniture Builder
- Experimental Box Tester
- Custom Stock Maker
- Counter Top Maker
- Chair Mender
- Chair Mechanic
- Chair Maker
- Cabinet Worker
- Cabinet Professional
- Bow Maker
- Boat Oar Maker
- Antique Repairer
- Antique Furniture Repairer
- Alteration Worker
- Accordion Maker
Tasks for “Hand Carver”
- Establish the specifications of articles to be constructed or repaired or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.
- Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools.
- Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
- Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product.
- Design furniture, using computer-aided drawing programs.
- Program computers to operate machinery.
- Match materials for color, grain, or texture, giving attention to knots or other features of the wood.
- Reinforce joints with nails or other fasteners to prepare articles for finishing.
- Cut timber to the right size and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
- Draw up detailed specifications and discuss projects with customers.
- Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces.
- Perform final touch-ups with sandpaper or steel wool.
- Estimate the amounts, types, or costs of needed materials.
- Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
- Bore holes for insertion of screws or dowels, by hand or using boring machines.
- Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture.
- Apply Masonite, formica, or vinyl surfacing materials.
- Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps.
Related Technology & Tools
- Bowl lathes
- Set squares
- Braces and bits
- Circular saws
- Saber saws
- Fingernail gouges
- Locking C-clamps
- Veneer saws
- Morticers
- Belt sanders
- Safety glasses
- Laminate trimmers
- Pneumatic nail guns
- Disk sanders
- Heated putty knives
- Spokeshaves
- Power sanders
- Biscuit joining machines
- Rip saws
- Tool sharpeners
- Biscuit joiners
- Table routers
- Drill presses
- Carpentry chisels
- Portable routers
- Scribers
- Trammel points
- Bench dogs
- Drafting compasses
- Paint spray guns
- Steel rules
- Burn-in knives
- Case clamps
- Wedge clamps
- Spindle shapers
- Awls
- Bench vises
- Jack planes
- Marking gauges
- Personal computers
- Parting tools
- Moisture meters
- Table saws
- Jointer planes
- Panel saws
- Wood lathes
- Random orbital sanders
- Locking pliers
- Power routers
- Edge banders
- Digital micrometers
- Power planers
- Dividers
- Templates
- Bowl gouges
- Draw knives
- Combination planes
- Paint application brushes
- Scrapers
- Protective ear plugs
- Mallets
- Putty knives
- Fore planes
- Metal punches
- Sliding table saws
- Paint application rollers
- Wood files
- Mill files
- Straight screwdrivers
- Miter clamps
- Chop saws
- Tenon saws
- Quick-release clamps
- Back saws
- Viscosity cups
- Bastard flat files
- Adjustable hand wrenches
- Smooth planes
- Minipresses
- Safety goggles
- Band clamps
- Metal shears
- Hand sanding blocks
- Pin nailers
- Hand saws
- Power saws
- Profile grinders
- Staple guns
- Phillips head screwdrivers
- Slide calipers
- Pneumatic staplers
- Roughing gouges
- Power screwguns
- Plate jointers
- Line borers
- Water wheels
- Bench grinders
- Angle dividers
- Bandsaws
- Radial arm saws
- Nail guns
- Circular planes
- Adjustable jigs
- Power drills
- Mini lathes
- Boring machines
- Combination squares
- Edging clamps
- Precision levels
- Computerized numerical control CNC routers
- T-squares
- Layout squares
- Spring clamps
- Panel routers
- Claw hammers
- Marking knives
- Miter saws
- Thickness planers
- Hand augers
- Edge sanders
- Block planes
- Reciprocating saws
- T-bevels
- Parallel jaw clamps
- Wide belt sanders
- Jointers
- Lacquer booths
- Single spindle drill presses
- Scroll saws
- Dial calipers
- Skew chisels
- Hand screw wood clamps
- Computerized numerical control CNC machining centers
- Plumb bobs
- Bar clamps
- Machinists' squares
- Hot presses
- Overarm routers
- Cold presses
- Dovetail saws
- Cutoff saws
- Plunge routers
- Profile molders
- Jig saws
- Cam clamps
- Shapers
- Radial drills
- Sliding panel saws
- Tenoners
- Measuring tapes
- Utility knives
- Microsoft Windows
- Microsoft Outlook
- Autodesk AutoCAD
- Computerized maintenance management system CMMS
- Microsoft Excel
- Data entry software
- Computer aided design CAD software
- Computer estimation software