Will “Rope Rider” be Replaced By Robots? 🤔

83% Chance of Automation

“Rope Rider” will probably be replaced by robots.

This job is ranked #458 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Operate railroad track switches. Couple or uncouple rolling stock to make up or break up trains. Signal engineers by hand or flagging. May inspect couplings, air hoses, journal boxes, and hand brakes.

Job Details

The SOC (Standard Occupational Classification) code is 53-4021.00
The Mean Annual Wage in the U.S. is $ 55,320.00
The Mean Hourly Wage is $ 26.00
Currently, there are 19,860 people on this job

☝️ Information based on the reference occupation “Railroad Brake, Signal, and Switch Operators”.

Also Known As…

Tasks for “Rope Rider”

Raise levers to couple and uncouple cars for makeup and breakup of trains.
Refuel and lubricate engines.
Adjust controls to regulate air-conditioning, heating, and lighting on trains for comfort of passengers.
Connect air hoses to cars, using wrenches.
Make minor repairs to couplings, air hoses, and journal boxes, using hand tools.
Answer questions from passengers concerning train rules, stations, and timetable information.
Inspect tracks, cars, and engines for defects and to determine service needs, sending engines and cars for repairs as necessary.
Climb ladders to tops of cars to set brakes.
Receive oral or written instructions from yardmasters or yard conductors indicating track assignments and cars to be switched.
Observe signals from other crew members so that work activities can be coordinated.
Set flares, flags, lanterns, or torpedoes in front and at rear of trains during emergency stops to warn oncoming trains.
Record numbers of cars available, numbers of cars sent to repair stations, and types of service needed.
Operate and drive locomotives, diesel switch engines, dinkey engines, flatcars, and railcars in train yards and at industrial sites.
Pull or push track switches to reroute cars.
Signal locomotive engineers to start or stop trains when coupling or uncoupling cars, using hand signals, lanterns, or radio communication.
Watch for and relay traffic signals to start and stop cars during shunting.
Inspect couplings, air hoses, journal boxes, and handbrakes to ensure that they are securely fastened and functioning properly.
Monitor oil, air, and steam pressure gauges, and make sure water levels are adequate.
Provide passengers with assistance entering and exiting trains.
Ride atop cars that have been shunted, and turn handwheels to control speeds or stop cars at specified positions.

Related Technology & Tools

Specialty wrench sets
Signal flares
Switch handles
Air pressure gauges
Hand brakes
Safety air horns
Car pullers
Steam pressure gauges
Signal flags
Diesel freight engines
Ground throw switches
Buffer stops
Equipment couplers
Railroad track switches
Diesel switch engines
Electric freight engines
Locomotive wheel chocks
Dock boards
Remote control locomotives
Mobile radios
Safety gloves
Steel-toes boots
Oil pressure gauges
Protective glasses
Automatic track switching systems
Mobile scaffolding
Derailers
Dinky engines
Signaling lanterns

Electronic train management systems ETMS
Data entry software
Time tracking software
Route mapping software