Will “Gas Engineer” be Replaced By Robots? 🤔
91% Chance of Automation
“Gas Engineer” will probably be replaced by robots.
This job is ranked #549 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Operate steam, gas, electric motor, or internal combustion engine driven compressors. Transmit, compress, or recover gases, such as butane, nitrogen, hydrogen, and natural gas.
- The SOC (Standard Occupational Classification) code is 53-7071.00
- The Mean Annual Wage in the U.S. is $ 59,620.00
- The Mean Hourly Wage is $ 28.00
- Currently, there are 3,890 people on this job
☝️ Information based on the reference occupation “Gas Compressor and Gas Pumping Station Operators”.
Also Known As…
- Gas Compressor and Gas Pumping Station Operators
- Terminal Operator
- Production Technician
- Plant Operator
- Pipeline Technician
- Pipeline Systems Operator
- Liquefied Natural Gas Plant Operator (LNG Plant Operator)
- Field Operator
- Compressor Station Operator
- Compressor Operator
- Wireline Field Operator
- Station Engineer
- Plant Manager
- Operation Specialist
- Oil and Gas Operator
- Liquid Natural Gas Plant Operator
- High Pressure Compressed Gas Filler
- Gas Transfer Operator
- Gas Storage Operator
- Gas Storage Field Journeyman
- Gas Pumping Station Operator
- Gas Plant Operator
- Gas Operator
- Gas Cylinder Processor
- Gas Compressor Operator
- Gas Booster Engineer
- Fill Plant Operator
- Corrosion Technician
- Compressor Technician
- Compressor Engineer
- Butane Compressor Operator
- Butadiene Compressor Operator
- Acetylene Plant Technician
- Acetylene Gas Compressor
Tasks for “Gas Engineer”
- Read gas meters, and maintain records of the amounts of gas received and dispensed from holders.
- Maintain each station by performing general housekeeping duties such as painting, washing, and cleaning.
- Take samples of gases and conduct chemical tests to determine gas quality and sulfur or moisture content, or send samples to laboratories for analysis.
- Operate power-driven pumps that transfer liquids, semi-liquids, gases, or powdered materials.
- Turn knobs or switches to regulate pressures.
- Submit daily reports on facility operations.
- Move controls and turn valves to start compressor engines, pumps, and auxiliary equipment.
- Clean, lubricate, and adjust equipment, and replace filters and gaskets, using hand tools.
- Respond to problems by adjusting control room equipment or instructing other personnel to adjust equipment at problem locations or in other control areas.
- Record instrument readings and operational changes in operating logs.
- Connect pipelines between pumps and containers that are being filled or emptied.
- Monitor meters and pressure gauges to determine consumption rate variations, temperatures, and pressures.
- Adjust valves and equipment to obtain specified performance.
Related Technology & Tools
- Phillips screwdrivers
- Socket wrench sets
- Internal combustion engine driven compressors
- Steam driven compressors
- Electrically powered compressors
- Gas engine driven compressors
- Cordless drills
- Water pumps
- Grease dispensing guns
- Heating boilers
- Ratchet wrenches
- Tablet computers
- Straight screwdrivers
- Multipurpose hammers
- Gas pressure gauges
- Adjustable pipe wrenches
- Personal computers
- Computerized maintenance management system CMMS
- Microsoft Excel
- Microsoft Office
- Microsoft Word
- Data entry software
- Microsoft Outlook