Will “Engineer and Geologist” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Design or oversee projects involving provision of potable water, disposal of wastewater and sewage, or prevention of flood-related damage. Prepare environmental documentation for water resources, regulatory program compliance, data management and analysis, and field work. Perform hydraulic modeling and pipeline design.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2081.01
☝️ Information based on the reference occupation “Water/Wastewater Engineers”.
Also Known As…
- Water/Wastewater Engineers
- Water Reuse Program Manager
- Surface Water Manager
- Project Manager/Design Manager
- Program Manager
- Principal Technologist
- Principal Consulting Engineer
- Director Water and Waste Services
- Assistant County Engineer
- Acting Section Chief
- Watershed Engineer
- Water/Wastewater Project Manager
- Water/Wastewater Project Engineer
- Water/Wastewater Engineer
- Water Systems Engineer
- Water Systems Designer
- Water Resources Engineer
- Water Project Engineer
- Water Engineer
- Wastewater Project Engineer
- Wastewater Process Engineer
- Wastewater Plant Civil Engineer
- Wastewater Engineer
- Wastewater Design Engineer
- Remediation Project Engineer
- Project Manager
- Hydrologic Modeler
- Floodplain Manager
- Engineer and Geologist
- Dimensional Engineer
Tasks for “Engineer and Geologist”
- Design water run-off collection networks, water supply channels, or water supply system networks.
- Conduct cost-benefit analyses for the construction of water supply systems, run-off collection networks, water and wastewater treatment plants, or wastewater collection systems.
- Design water storage tanks or other water storage facilities.
- Design water distribution systems for potable or nonpotable water.
- Identify design alternatives for the development of new water resources.
- Provide technical support on water resource or treatment issues to government agencies.
- Oversee the construction of decentralized or on-site wastewater treatment systems, including reclaimed water facilities.
- Review and critique proposals, plans, or designs related to water or wastewater treatment systems.
- Provide technical direction or supervision to junior engineers, engineering or computer-aided design (CAD) technicians, or other technical personnel.
- Analyze storm water or floodplain drainage systems to control erosion, stabilize river banks, repair channel streams, or design bridges.
- Design sludge treatment plants.
- Write technical reports or publications related to water resources development or water use efficiency.
- Analyze the efficiency of water delivery structures, such as dams, tainter gates, canals, pipes, penstocks, or cofferdams.
- Design pumping systems, pumping stations, pipelines, force mains, or sewers for the collection of wastewater.
- Conduct feasibility studies for the construction of facilities, such as water supply systems, run-off collection networks, water and wastewater treatment plants, or wastewater collection systems.
- Analyze and recommend sludge treatment or disposal methods.
- Develop plans for new water resources or water efficiency programs.
- Gather and analyze water use data to forecast water demand.
- Conduct water quality studies to identify and characterize water pollutant sources.
- Perform mathematical modeling of underground or surface water resources, such as floodplains, ocean coastlines, streams, rivers, or wetlands.
- Design water or wastewater lift stations, including water wells.
- Perform hydrological analyses, using three-dimensional simulation software, to model the movement of water or forecast the dispersion of chemical pollutants in the water supply.
- Analyze and recommend chemical, biological, or other wastewater treatment methods to prepare water for industrial or domestic use.
- Conduct environmental impact studies related to water and wastewater collection, treatment, or distribution.
- Perform hydraulic analyses of water supply systems or water distribution networks to model flow characteristics, test for pressure losses, or to identify opportunities to mitigate risks and improve operational efficiency.
- Design or select equipment for use in wastewater processing to ensure compliance with government standards.
- Design domestic or industrial water or wastewater treatment plants, including advanced facilities with sequencing batch reactors (SBR), membranes, lift stations, headworks, surge overflow basins, ultraviolet disinfection systems, aerobic digesters, sludge lagoons, or control buildings.
Related Technology & Tools
- Computer data input scanners
- Desktop computers
- Computer laser printers
- Large-format plotters
- Laptop computers
- Personal computers
- Digitizers
- Bentley InRoads Suite
- Google Chrome
- XP Software XPSWMM
- Microsoft PowerPoint
- Computer aided design and drafting software CADD
- Microsoft Internet Explorer
- DHI MIKE URBAN
- MapInfo
- Web browser software
- Eagle Point LANDCADD
- HEC-RAS
- Wallingford Software InfoWorks WS
- Autodesk AutoCAD
- Mozilla Firefox
- ESRI ArcGIS software
- Microsoft Office
- HEC-1
- EPA Storm Water Management Model SWMM
- Microsoft Project
- NIWA Tideda
- MWH Soft InfoSWMM
- Hydraulic modeling software
- KYPipe
- Microsoft Access
- Autodesk AutoCAD Civil 3D
- Bentley GEOPAK Civil Engineering Suite
- Microsoft Word
- Microsoft Excel
- HydroCAD Software Solutions HydroCAD
- Bentley WaterCAD
- HEC-GeoRAS
- Bentley Microstation
- Bentley SewerCAD
- Bentley StormCAD
- Minitab
- Structured query language SQL
- Wallingford Software InfoSewer