Will “Production Staff Worker” be Replaced By Robots? 🤔
3% Chance of Automation
“Production Staff Worker” will not be replaced by robots.
This job is ranked #108 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply engineering theory and principles to problems of industrial layout or manufacturing production, usually under the direction of engineering staff. May perform time and motion studies on worker operations in a variety of industries for purposes such as establishing standard production rates or improving efficiency.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3026.00
- The Mean Annual Wage in the U.S. is $ 56,920.00
- The Mean Hourly Wage is $ 27.00
- Currently, there are 63,220 people on this job
☝️ Information based on the reference occupation “Industrial Engineering Technicians”.
Also Known As…
- Industrial Engineering Technicians
- Quality Control Engineering Technician (QC Engineering Technician)
- Process Technician
- Process Engineer
- Process Documentation and Methods Analyst
- Methods Engineer
- Manufacturing Technician
- Industrial Engineering Technician
- Industrial Engineering Analyst
- Engineering Technician
- Yarn Tester
- Woolen Tester
- Time Study Technologist
- Time Study Technician
- Time Study Observer
- Time Study Analyst
- Time Motion Analyst
- Solar Hot Water Heater Manufacturing Technician
- Soda Tester
- Quality Process Lead
- Quality Controller
- Quality Control Technician
- Quality Control Representative (QC Representative)
- Quality Assurance Manager (QA Manager)
- Project Engineer
- Production Staff Worker
- Production Planner
- Production Control Technologist
- Production Control Analyst
- Production Analyst
- Plant Facilities Technician
- Personnel Quality Assurance Auditor
- Paper Tester
- Motion Study Technician
- Motion Study Engineer
- Motion Study Analyst
- Methods Time Analyst
- Methods Study Analyst
- Methods Specialist Engineer
- Materials Planner
- Manufacturing Engineering Technician
- Industrial Technician
- CPS Team Lead (Chip Placement Solution Team Lead)
- Cloth Tester
- Cellophane Tester
- Boiler Water Tester
- Analysis Tester
Tasks for “Production Staff Worker”
- Initiate or participate in emergency response procedures to contain, secure, or clean spills of hazardous materials.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Operate industrial hygiene equipment in manufacturing environments to reduce exposure to environmental contaminants.
- Design new equipment or materials or recommend revision to methods of operation, material handling, equipment layout, or other changes to increase production or improve standards.
- Recommend modifications to existing quality or production standards to achieve optimum quality within limits of equipment capability.
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Apply statistical quality control procedures to production test data.
- Evaluate data and write reports to validate or indicate deviations from existing standards.
- Prepare charts, graphs, or diagrams to illustrate workflow, routing, floor layouts, material handling, or machine utilization.
- Monitor environmental management systems for compliance with environmental policies, programs, or regulations.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
- Order and purchase manufacturing equipment for production operations.
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Interpret engineering drawings, schematic diagrams, or formulas for management or engineering staff.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
Related Technology & Tools
- Toolmaker's microscopes
- Dial indicators
- Scissor lifts
- Digital video cameras
- Forklifts
- Optical comparators
- Computerized numerical control CNC lathes
- Direct computer-controlled coordinate measuring machines DCC-CMM
- Personal computers
- Computer numerical controlled CNC milling machines
- Gauge blocks
- Vernier calipers
- Plotters
- Coordinate measuring machines CMM
- Microsoft PowerPoint
- Microsoft Excel
- Microsoft Visio
- Spreadsheet software
- SAP
- Microsoft SharePoint
- Data entry software
- Computer aided manufacturing CAM software
- Statistical software
- Microsoft Word
- Microsoft Office
- Word processing software
- Creo Parametric Pro/ENGINEER
- Dassault Systems SOLIDWORKS
- Kinematic Engineering MicroMeasure IV
- Computerized numerical control CNC machine software
- Microsoft Access
- Graphics software
- Autodesk AutoCAD
- Wilcox Associates PC-DMIS
- ProModel