Will “Sand Analyst” be Replaced By Robots? 🤔
1.7% Chance of Automation
“Sand Analyst” will not be replaced by robots.
This job is ranked #77 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, plastics, detergents, cement, paper, and pulp, by applying principles and technology of chemistry, physics, and engineering.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2041.00
- The Mean Annual Wage in the U.S. is $ 105,420.00
- The Mean Hourly Wage is $ 50.00
- Currently, there are 31,990 people on this job
☝️ Information based on the reference occupation “Chemical Engineers”.
Also Known As…
- Chemical Engineers
- Scientist
- Refinery Process Engineer
- Project Engineer
- Process Engineer
- Process Development Engineer
- Process Control Engineer
- Engineering Scientist
- Engineer
- Development Engineer
- Chemical Engineer
- Weapons Engineer
- Weapons Designer
- Technical Supervisor
- Supplier Quality Engineer (SQE)
- Sand Technologist
- Research Chemical Engineer
- Processes Chemical Design Engineer
- Process Development Director
- Process Design Engineer
- Process Design Chemical Engineer
- Polymerization Supervisor
- Polymerization Engineer
- Poly Area Supervisor
- Plastics Engineer
- Plant Engineer
- Pharmaceutical Process Engineer
- Oxidation Engineer
- Nanotechnologist
- Monomer Recovery Supervisor
- Lubricating Engineer
- Gas Combustion Engineer
- Fuels Engineer
- Explosives Engineer
- Design Engineer
- Commissioning Engineer
- Chemical Test Engineer
- Chemical Research Engineer
- Chemical Process Engineer
- Chemical Process Control, Design, or Development Engineer
- Blending Coordinator
- Automation Engineer
- Absorption and Adsorption Engineer
Tasks for “Sand Analyst”
- Design and plan layout of equipment.
- Troubleshoot problems with chemical manufacturing processes.
- Develop processes to separate components of liquids or gases or generate electrical currents, using controlled chemical processes.
- Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
- Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
- Perform laboratory studies of steps in manufacture of new products and test proposed processes in small-scale operation, such as a pilot plant.
- Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
- Develop safety procedures to be employed by workers operating equipment or working in close proximity to ongoing chemical reactions.
- Conduct research to develop new and improved chemical manufacturing processes.
- Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
- Prepare estimate of production costs and production progress reports for management.
- Direct activities of workers who operate or are engaged in constructing and improving absorption, evaporation, or electromagnetic equipment.
Related Technology & Tools
- Catalytic reactors
- Benchtop mixers
- Personal computers
- Distillation systems
- Atomic force microscopes
- Distillation columns
- Programmable logic controllers PLC
- Safety goggles
- Sludge dryers
- Benchtop centrifuges
- Lyophilizers
- Heat exchangers
- Mixing tanks
- Filtration systems
- Vacuum pumps
- Powder mixing equipment
- Personal digital assistants PDA
- Gas absorbers
- Chromatographic scanning equipment
- Mass spectrometers
- Agitators
- Vial handling systems
- Plate filter presses
- Surface analysis spectroscopes
- Wet scrubbers
- Laboratory evaporaters
- Computer aided design and drafting CADD software
- ChemicaLogic SteamTab
- Chempute Software Engineer's Aide SINET
- Chempute Software SuperPro Designer
- Control Station ENGINEER
- Applied Flow Technology AFT Arrow
- SAP
- Microsoft Office
- Microsoft PowerPoint
- Presentation software
- EPCON International SYSTEM 7 Process Explorer
- C++
- Microsoft Excel
- G&P Engineering Software PhysProps
- Madison Technical Software Steampak
- G&P Engineering Software EngVert
- C
- Chempute Software VisiMix
- Dassault Systems SOLIDWORKS
- Chempute Software ChemDraw
- Absorption process simulation software
- Madison Technical Software Enviropak
- AspenTech aspenONE for Chemicals
- National Instruments LabVIEW
- Applied Flow Technology AFT Fathom
- Microsoft Word
- GE Fanuc Proficy Machine Edition
- Microsoft Project
- Prode PD-Plus
- CAD/CAM
- Spreadsheet software
- The MathWorks MATLAB
- Autodesk AutoCAD
- G&P Engineering Software PipeDrop
- Relational database software
- Chemstations CHEMCAD
- EPCON International CHEMPRO Engineering Suite
- PTC Creo Parametric
- Microsoft Visual Basic
- Minitab
- Madison Technical Software Chempak Plus
- CD-adapco STAR-CAD
- EPCON International SiNET
- Statistical software
- SoftLab PHEdesign
- Structured query language SQL
- Dassault Systemes CATIA
- Microsoft Visio
- Cerebro CerebroMix
- Laboratory information management system LIMS
- Desktop publishing software
- Microsoft Access
- Chempute Software EstPro
- Thermal Analysis Systems The Energy Analyst
- Microsoft Visual C# .NET
- Chempute Software E-Notebook