Will “Tile and Marble Setter” be Replaced By Robots? 🤔
75% Chance of Automation
“Tile and Marble Setter” will probably be replaced by robots.
This job is ranked #410 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply hard tile, marble, and wood tile to walls, floors, ceilings, and roof decks.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2044.00
- The Mean Annual Wage in the U.S. is $ 44,770.00
- The Mean Hourly Wage is $ 21.00
- Currently, there are 36,830 people on this job
☝️ Information based on the reference occupation “Tile and Marble Setters”.
Also Known As…
- Tile and Marble Setters
- Tile Setter
- Tile Mechanic
- Tile Mason
- Tile Installer
- Tile Finisher
- Tile and Marble Installer
- Marble Mason
- Ceramic Tile Setter
- Ceramic Tile Mechanic
- Wood Tile Installer
- Tilesetter
- Tile Setter Apprentice
- Tile Professional
- Tile Erector
- Tile Conduit Layer
- Tile and Marble Setter
- Parquetry Floor Layer
- Parquet Floor Layer
- Mosaic Worker
- Mosaic Layer
- Mosaic Floor Layer
- Mastic Floor Layer
- Marble Worker
- Marble Installer
- Marble Finisher
- Marble Ceiling Installer
- Hard Tile Setter Apprentice
- Hard Tile Setter
- Granite Installer
- Granite Countertop Installer
- Floor Tiling Professional
- Floor Layer Tile
- Ceramic Tile Installer
- Bathroom Tiling Professional
- Acoustical Material Worker
- Acoustical Installer
- Acoustical Carpenter
Tasks for “Tile and Marble Setter”
- Build underbeds and install anchor bolts, wires, and brackets.
- Assist customers in selection of tile and grout.
- Study blueprints and examine surface to be covered to determine amount of material needed.
- Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications.
- Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units.
- Cut and shape tile to fit around obstacles and into odd spaces and corners, using hand and power cutting tools.
- Prepare cost and labor estimates, based on calculations of time and materials needed for project.
- Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.
- Brush glue onto manila paper on which design has been drawn and position tiles, finished side down, onto paper.
- Level concrete and allow to dry.
- Apply mortar to tile back, position the tile, and press or tap with trowel handle to affix tile to base.
- Lay and set mosaic tiles to create decorative wall, mural, and floor designs.
- Remove and replace cracked or damaged tile.
- Finish and dress the joints and wipe excess grout from between tiles, using damp sponge.
- Cut tile backing to required size, using shears.
- Apply a sealer to make grout stain- and water-resistant.
- Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat to a metal screen.
- Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.
- Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.
- Measure and cut metal lath to size for walls and ceilings, using tin snips.
- Install and anchor fixtures in designated positions, using hand tools.
- Determine and implement the best layout to achieve a desired pattern.
- Spread mastic or other adhesive base on roof deck to form base for promenade tile, using serrated spreader.
- Align and straighten tile using levels, squares, and straightedges.
- Measure and mark surfaces to be tiled, following blueprints.
Related Technology & Tools
- Safety gloves
- Rubber hammers
- Pry bars
- Layout sticks
- Cold chisels
- Tile nippers
- Floor polishers
- Floor scrapers
- Notebook computers
- Claw hammers
- Hard hats
- Levels
- Scaffolding
- Polishers
- Wet-dry vacuums
- Ear plugs
- Mallets
- Adjustable widemouth pliers
- Jackhammers
- Fall arrest systems
- Tape measures
- Ladder jacks
- Utility knives
- Power undercut saws
- Bull floats
- Mechanical scaffolds
- Point trowels
- Horizontal shaft mixers
- Screwdrivers
- Mini grinders
- Heavy gauge trowels
- Exhaust fans
- Bench vises
- Gas generators
- Dust collectors
- Squares
- Rolling scaffolds
- Hot glue guns
- Colloidal mixers
- Wonder bars
- Chipping hammers
- Grinding stones
- Grout scrapers
- Base grinders
- Power routers
- Wood floats
- Portable mortar mixers
- Blow torches
- Screeds
- Double-sided files
- Respirators
- Straightedges
- Socket wrench sets
- Flat trowels
- Scissor lifts
- Buttering trowels
- Grout saws
- Ladders
- Eyewash facilities
- Grouting trowels
- Goggles
- Story pole tape measures
- Air compressors
- Transit levels
- Chalk lines
- Caulking guns
- Drum cement mixers
- Serrated spreaders
- Laser squares
- Notch trowels
- Laser levels
- Face shields
- Suction cups
- Grout floats
- Hammers
- Tin snips
- Vertical shaft mixers
- Gauging trowels
- Stationary scaffolds
- Dust masks
- Lifelines
- Stone grinders
- Plumb bobs
- Margin trowels
- Magnesium floats
- Water levels
- Personal computers
- Angle grinders
- Builders' levels
- Tile grout cleaning machines
- Power tile saws
- Power chisels
- Power scarifiers
- Floor grinding machines
- Mixing drills
- Spreader spatulas
- Floor scrubbers
- Hammer drills
- Hacksaws
- Staple guns
- Stand-up screw guns
- Power buffers
- Safety glasses
- Molding prybars
- Wet saws
- Finishing trowels
- Electric winches
- Tile cutters
- Articulating boom lifts
- Putty knives
- Power drills
- Pan mixers
- Stone polishers
- Ear muffs
- Measure Square FloorEstimate Pro
- EasyCAD Iris 2D
- Aya Associates Comp-U-Floor
- TileGem