Will “PV Design and Installation Technician” be Replaced By Robots? 🤔

Unknown Chance of Automation

Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?

Job Description

Assemble, install, or maintain solar photovoltaic (PV) systems on roofs or other structures in compliance with site assessment and schematics. May include measuring, cutting, assembling, and bolting structural framing and solar modules. May perform minor electrical work such as current checks.

Job Details

The SOC (Standard Occupational Classification) code is 47-2231.00
The Mean Annual Wage in the U.S. is $ 42,500.00
The Mean Hourly Wage is $ 20.00
Currently, there are 8,870 people on this job

☝️ Information based on the reference occupation “Solar Photovoltaic Installers”.

Also Known As…

Tasks for “PV Design and Installation Technician”

Install active solar systems, including solar collectors, concentrators, pumps, or fans.
Activate photovoltaic (PV) systems to verify system functionality and conformity to performance expectations.
Measure and analyze system performance and operating parameters to assess operating condition of systems or equipment.
Determine photovoltaic (PV) system designs or configurations based on factors such as customer needs, expectations, and site conditions.
Apply weather sealing to array, building, or support mechanisms.
Program, adjust, or configure inverters and controls for desired set points and operating modes.
Assemble solar modules, panels, or support structures, as specified.
Determine appropriate sizes, ratings, and locations for all system overcurrent devices, disconnect devices, grounding equipment, and surge suppression equipment.
Determine connection interfaces for additional subpanels or for connecting photovoltaic (PV) systems with utility services or other power generation sources.
Demonstrate system functionality and performance, including start-up, shut-down, normal operation, and emergency or bypass operations.
Identify installation locations with proper orientation, area, solar access, or structural integrity for photovoltaic (PV) arrays.
Perform routine photovoltaic (PV) system maintenance on modules, arrays, batteries, power conditioning equipment, safety systems, structural systems, weather sealing, or balance of systems equipment.
Select mechanical designs, installation equipment, or installation plans that conform to environmental, architectural, structural, site, and code requirements.
Install photovoltaic (PV) systems in accordance with codes and standards, using drawings, schematics, and instructions.
Test operating voltages to ensure operation within acceptable limits for power conditioning equipment, such as inverters and controllers.
Install module array interconnect wiring, implementing measures to disable arrays during installation.
Diagram layouts and locations for photovoltaic (PV) arrays and equipment, including existing building or site features.
Compile or maintain records of system operation, performance, and maintenance.
Check electrical installation for proper wiring, polarity, grounding, or integrity of terminations.
Examine designs to determine current requirements for all parts of the photovoltaic (PV) system electrical circuit.
Install required labels on solar system components and hardware.
Identify methods for laying out, orienting, and mounting modules or arrays to ensure efficient installation, electrical configuration, or system maintenance.
Identify and resolve any deficiencies in photovoltaic (PV) system installation or materials.
Determine materials, equipment, and installation sequences necessary to maximize installation efficiency.
Identify electrical, environmental, and safety hazards associated with photovoltaic (PV) installations.
Visually inspect and test photovoltaic (PV) modules or systems.

Related Technology & Tools

Channel lock pliers
Ratchet sets
Wire cutters
Wire strippers
Builders' levels
Trenchers
Volt-ohm meters VOM
Work vans
Caulking equipment
Filter masks
Sledgehammers
Inclinometers
Utility knives
Mallets
Phillips head screwdrivers
Wheelbarrows
Laser line levels
Medium pipe wrenches
Utility work machines
Torpedo levels
Laptop computers
Solarimeters
Hex wrenches
Tin snips
Pair of dykes
Large pipe wrenches
Putty knives
Pipe cutters
Protective gloves
Adjustable hand wrenches
Solar analysis systems
Directional compasses
Extension ladders
Forklifts
Desktop computers
Digital multimeters
Post hole augers
Framing squares
Steel measuring tapes
Crimping lugs
Fall arrest harnesses
Cordless drills
Rat tail files
Safety glasses
Video probe systems
Impact drills
Straight screwdrivers
Personal computers
Handheld calculators
Global positioning system GPS receivers
Dirt shovels
Claw hammers
Reciprocating saws
Acetylene torches

Extensible markup language XML
Microsoft Office
Project management software
Microsoft Excel
Microsoft Word
Microsoft Outlook
Cost estimating software
Work scheduling software