Will “Boat Rigger” be Replaced By Robots? 🤔
66% Chance of Automation
“Boat Rigger” will maybe be replaced by robots.
This job is ranked #368 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Repair and adjust electrical and mechanical equipment of inboard or inboard-outboard boat engines.
Job Details
- The SOC (Standard Occupational Classification) code is 49-3051.00
- The Mean Annual Wage in the U.S. is $ 40,860.00
- The Mean Hourly Wage is $ 19.00
- Currently, there are 20,260 people on this job
☝️ Information based on the reference occupation “Motorboat Mechanics and Service Technicians”.
Also Known As…
- Motorboat Mechanics and Service Technicians
- Service Technician
- Outboard Technician
- Outboard Motor Mechanic
- Mechanic
- Marine Technician
- Marine Propulsion Technician
- Marine Mechanic
- Boat Motor Mechanic
- Boat Mechanic
- Service Writer
- Outboard Motors Experimental Mechanic
- Outboard Motor Tester
- Motorboat Mechanic
- Marine Diesel Mechanic
- Experimental Outboard Motors Mechanic
- Certified Marine Mechanic
- Boat Tester
- Boat Rigger
- Boat Outboard Engine Mechanic
Tasks for “Boat Rigger”
- Idle motors and observe thermometers to determine the effectiveness of cooling systems.
- Start motors and monitor performance for signs of malfunctioning, such as smoke, excessive vibration, or misfiring.
- Repair engine mechanical equipment, such as power tilts, bilge pumps, or power take-offs.
- Mount motors to boats and operate boats at various speeds on waterways to conduct operational tests.
- Adjust carburetor mixtures, electrical point settings, or timing while motors are running in water-filled test tanks.
- Document inspection and test results and work performed or to be performed.
- Replace parts, such as gears, magneto points, piston rings, or spark plugs, and reassemble engines.
- Disassemble and inspect motors to locate defective parts, using mechanic's hand tools and gauges.
- Inspect and repair or adjust propellers or propeller shafts.
- Perform routine engine maintenance on motorboats, such as changing oil and filters.
- Adjust generators and replace faulty wiring, using hand tools and soldering irons.
- Repair or rework parts, using machine tools such as lathes, mills, drills, or grinders.
- Set starter locks and align and repair steering or throttle controls, using gauges, screwdrivers, or wrenches.
Related Technology & Tools
- Personal computers
- Flat tip screw starters
- Mechanics' pick sets
- Flat cold chisels
- Combination pliers
- Slot screwdrivers
- Diagonal cutting pliers
- Wire cutters
- Solder guns
- Vise grip pliers
- Inspection mirrors
- Combination wrenches
- Carbon scrapers
- Crowfoot wrenches
- Cotter pin pullers
- Test lights
- Magnetic pickup tools
- Shift cable tools
- Torque wrenches
- Seal pullers
- Temperature guns
- Propeller wrenches
- Standard flex sockets
- Measuring tapes
- Idle air control signal tester
- Battery load testers
- Flywheel holders
- Socket wrench extensions
- Tapered hand files
- Spanners
- Power drill bit sets
- Digital multimeters
- Needle nose pliers
- Starter punches
- Hex sets
- Dead blow hammers
- Allen wrench sets
- Electrical diagnostic platform analyzers
- Peak voltage testers
- Torque adapters
- Impact drivers
- Channel lock pliers
- Breaker bars
- Wire crimpers
- Bearing retainer wrenches
- Metric sockets
- Mini hacksaws
- Piston ring compressors
- Tablet computers
- Fluted screw extractors
- Adjustable gap spark testers
- Spark plug gap testers
- Automatic center punches
- Battery terminal cleaners
- Dial calipers
- Fixed tip snap ring pliers
- Metric flex sockets
- Taper feeler gauges
- Spark plug sockets
- Parallel pin punches
- T handle hex wrenches
- Standard socket wrenches
- Mechanical fingers
- Coil function testers
- Penlights
- Tie rod end pullers
- Phillips screwdrivers
- Torx bit sets
- Leakdown testers
- Ball peen hammers
- Speed handles
- Wire strippers
- Fuel filter wrenches
- Engine diagnostic scanners
- Microsoft Excel
- Inventory tracking software
- Outboard engine diagnostic software
- CDI Electronics M.E.D.S.
- Rinda Technologies DIACOM Marine
- Microsoft Word