Will “Heating, Ventilation, Air Conditioning / Refrigeration Technician (HVAC / R Technician)” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Install and repair industrial and commercial refrigerating systems.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9021.02
☝️ Information based on the reference occupation “Refrigeration Mechanics and Installers”.
Also Known As…
- Refrigeration Mechanics and Installers
- Transportation Refrigeration Technician
- Service Technician
- Refrigeration Technician
- Refrigeration Operator
- Refrigeration Mechanic
- HVAC/R Service Technician (Heating, Ventilation, and Air Conditioning/Refrigeration Service Technician)
- Heating, Ventilation, Air Conditioning Technician (HVAC Technician)
- Heating, Ventilation, Air Conditioning Service Technician (HVAC Service Technician)
- Ammonia Refrigeration Technician
- VRT Mechanic (Variable Retention Time Mechanic)
- Technician
- Repair Servicer
- Refrigeration Unit Repairer
- Refrigeration Installer
- Refrigeration Engineer
- Mechanic
- HVAC Service Technician (Heating, Ventilation, and Air Conditioning Service Technician)
- HVAC Mechanic (Heating, Ventilation, and Air Conditioning Mechanic)
- Heating, Ventilation, Air Conditioning Mechanic (HVAC Mechanic)
- Heating, Ventilation, Air Conditioning / Refrigeration Technician (HVAC / R Technician)
- Field Service Technician
- Commercial Service Technician
- Bulk Coolers Installer
Tasks for “Heating, Ventilation, Air Conditioning / Refrigeration Technician (HVAC / R Technician)”
- Cut, bend, thread, and connect pipe to functional components and water, power, or refrigeration system.
- Braze or solder parts to repair defective joints and leaks.
- Fabricate and assemble structural and functional components of refrigeration system, using hand tools, power tools, and welding equipment.
- Lift and align components into position, using hoist or block and tackle.
- Adjust valves according to specifications and charge system with proper type of refrigerant by pumping the specified gas or fluid into the system.
- Adjust or replace worn or defective mechanisms and parts and reassemble repaired systems.
- Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
- Read blueprints to determine location, size, capacity, and type of components needed to build refrigeration system.
- Install wiring to connect components to an electric power source.
- Perform mechanical overhauls and refrigerant reclaiming.
- Insulate shells and cabinets of systems.
- Drill holes and install mounting brackets and hangers into floor and walls of building.
- Keep records of repairs and replacements made and causes of malfunctions.
- Dismantle malfunctioning systems and test components, using electrical, mechanical, and pneumatic testing equipment.
- Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
- Install expansion and control valves, using acetylene torches and wrenches.
- Lay out reference points for installation of structural and functional components, using measuring instruments.
- Observe and test system operation, using gauges and instruments.
- Supervise and instruct assistants.
- Test lines, components, and connections for leaks.
- Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
Related Technology & Tools
- Pressure simulators
- Wire cutters
- Industrial vacuums
- Swaging tools
- Volt-ohm meters VOM
- Image scanners
- Refrigerant oil pumps
- Labeling machines
- Acetylene torches
- Service manifold sets
- Bolt cutters
- Staging equipment
- Valve wrenches
- Squares
- Charging cylinders
- Velometers
- Rulers
- Phase rotation meters
- Pipe dies
- Ammeters
- Flaring tools
- Bandsaws
- Scribers
- Potentiometers
- Crowbars
- Grease guns
- Computer diagnostic devices
- Handheld thermometers
- Spectrometers
- Personal computers
- Dial indicators
- Capacitance testers
- Material alignment jigs
- Belt tension indicators
- Refrigerant leak detectors
- Current simulators
- Air compressors
- Strobe tachometers
- Transfer pumps
- Portable refractometers
- Wattmeters
- Carbon dioxide CO2 testers
- Respirators
- Pipe cutters
- Litmus papers
- Micron gauges
- Open end wrenches
- Hammers
- Laptop computers
- Tap sets
- Charging manifolds
- Pipe threaders
- Manometers
- Scale rules
- Decibel meters
- Megohmmeters
- Flowmeters
- Adjustable widemouth pliers
- Drill bit sets
- Jacks
- Adjustable wrenches
- Watt transducers
- Air volume test equipment
- Screwdrivers
- Micrometers
- Pipe wrenches
- Carbon monoxide evaluators
- Power washers
- Multimeters
- Ladders
- Safety glasses
- Bubble levels
- Tube cutters
- Platform lifts
- Hand sprayers
- Wire strippers
- Chalk lines
- Compound gauges
- Scrapers
- Vernier calipers
- Slings
- Electric drills
- Air flow hoods
- Temperature simulators
- Pitot tubes
- Psychrometers
- Reciprocating saws
- Electrical frequency indicators
- Torque wrenches
- Precision levels
- Punches
- Voltage simulators
- Recovery and recycle units
- Cold chisels
- Tape measures
- Tin snips
- Vacuum pumps
- Power drills
- Safety goggles
- Soldering guns
- Humidity simulators
- Laser levels
- Caulking guns
- Vacuum gauges
- Black lights
- Temperature gauges
- Combustion analyzers
- Hoists
- Shackles
- Fish tapes
- Milliammeters
- Hand trucks
- Two way radios
- Pullers
- Dataloggers
- Power saws
- Draft gauges
- Lug crimping tool dies
- Calipers
- Brazing equipment
- Anemometers
- Hold down clamps
- Reamers
- Fin combs
- Water levels
- Ground fault circuit interrupter GFCI testers
- Oxygen testers
- Hole saws
- Mechanical stethoscopes
- Infrared thermography cameras and display units
- Telescoping boom trucks
- Forklifts
- Glue guns
- Socket wrench sets
- Knockout punches
- Fall arrest lines
- Hand drills
- Nut drivers
- Laser printers
- Thermocouple testers
- Plotters
- Scaffolding
- Magnehelic gauges
- Cordless drills
- Staging winches
- Smoke testers
- Utility knives
- Tachometers
- Feeler gauges
- Soldering irons
- Water temperature gauges
- Conduit benders
- Allen wrenches
- Wire brushes
- Gas pressure gauges
- Safety belts
- Straightedges
- Safety harnesses
- Vibration analyis equipment
- Screw extractor sets
- Side cutting pliers
- Transit levels
- Hacksaws
- Facility energy management software
- Johnson Controls Metasys
- Microsoft Excel
- Microsoft Office
- Database software