Will “Electromechanical Equipment Assemblers” be Replaced By Robots? 🤔
97% Chance of Automation
“Electromechanical Equipment Assemblers” will almost certainly be replaced by robots.
This job is ranked #648 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, dynamometers, magnetic drums, tape drives, brakes, control linkage, actuators, and appliances.
Job Details
- The SOC (Standard Occupational Classification) code is 51-2023.00
- The Mean Annual Wage in the U.S. is $ 35,410.00
- The Mean Hourly Wage is $ 17.00
- Currently, there are 45,540 people on this job
Also Known As…
- Wiring Technician
- Mechanical Assembler
- Electronics Assembler
- Electronic Technician
- Electronic Assembler
- Electromechanical Equipment Assembler
- Electromechanical Assembler
- Electrical Assembler
- Assembly Line Worker
- Assembler
- Xerox Machine Assembler
- Wave Guide Assembler
- Washer Assembler
- Vending Machine Assembler
- Vacuum Cleaner Assembler
- Typewriter Assembler
- Type Bar and Segment Assembler
- Synchronous Motor Assembler
- Subassembler
- Servomechanism Assembler
- Refrigerator Assembler
- Record Changer Assembler
- Radio Assembler
- Programmable Logic Controller Assembler
- Photographic Equipment Assembler
- Microwave Oven Assembler
- Microelectronics Assembler
- Mechanical Ordnance Assembler
- Manufacturing Assembler
- Machinist
- Machine Assembler
- Hydraulic Governor Assembler
- Household Appliance Assembler
- Final Assembler
- Electrician
- Electrical Machine Builder
- Dynamometer Assembler
- Console (Organs) Assembler
- Burglar Alarm Assembler
- Bench Precision Assembler
- Bearing Ring Assembler
- Assembly Worker
- Appliance Assembler
- Air-Conditioning Coil Assembler
Tasks for “Electromechanical Equipment Assemblers”
- Operate small cranes to transport or position large parts.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Position, align, and adjust parts for proper fit and assembly.
- Attach name plates and mark identifying information on parts.
- Connect cables, tubes, and wiring, according to specifications.
- Disassemble units to replace parts or to crate them for shipping.
- Pack or fold insulation between panels.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- File, lap, and buff parts to fit, using hand and power tools.
Related Technology & Tools
- Workshop bench vises
- Cornice brakes
- Precision rulers
- Plumb lines
- Multipurpose wrenches
- Spot welding tools
- Buffing wheels
- Electric hoists
- Gyroscopes
- Dynamic actuators
- Multifunction digital multimeters
- Component insertion machines
- Sledgehammers
- Precision levels
- C clamps
- Nail pullers
- Wire-routing tools
- Digital dynamometers
- Electric sanders
- Temperature testers
- Inspection microscopes
- Chalk line markers
- Hydraulic crimpers
- Electric soldering irons
- Digital calipers
- Flat hand-held files
- Combination pliers
- Socket wrench sets
- Workpiece positioning jigs
- Electric rotary wire brushes
- Comealongs
- Chain falls
- Punch presses
- Pipe taps
- Hand reamers
- Optical squares
- Digital oscilloscopes
- Test lights
- Metal chisels
- Grinding rasps
- Locking ratchet wrenches
- Metal-cutting bandsaws
- Metal shears
- Claw hammers
- Steel wedges
- Pneumatic riveters
- Magnetic drill presses
- Vernier height gauges
- Torque drivers
- Straight screwdrivers
- Portable power drills
- Digital micrometers
- Handheld grinders
- Personal computers
- Vernier calipers
- Grease paddles
- Power brakes
- Wire cutting tools
- Data entry software
- Autodesk AutoCAD
- Microsoft Office
- Microsoft Excel
- Timekeeping software
- SAP
- Blueprint display software
- Microsoft Word