Will “Avionics Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Avionics Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Avionics Technician”
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Adjust, repair or replace faulty components of test setups and equipment.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Finish vehicle instrumentation and deinstrumentation.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Exchange cooling system components in various vehicles.
Related Technology & Tools
- Safety wire pliers
- Tri-squares
- Shielded arc welding tools
- Computer numerical controlled CNC milling machines
- Thickness gauges
- Scribers
- Safety goggles
- Ultrasonic inspection equipment
- Gamma ray testing equipment
- Half-round files
- Adjustable wrenches
- Wire crimpers
- Hand snips
- Coordinate measuring machines CMM
- Drive punches
- Shakers
- Digital torque wrenches
- V blocks
- Bleeder wrenches
- Fluorescent penetrant inspection equipment
- Air-supplying respirators
- Center punches
- Vibration transducers
- Hydrasets
- Depth gauges
- Infrared inspection equipment
- Computerized numerical control CNC lathes
- Riveting tools
- X ray inspection equipment
- Alignment squares
- Plug gauges
- Hacksaws
- Vibration testers
- Soldering irons
- Pressure gauges
- Scaffolding
- Vixen files
- Gauge blocks
- Brazing hearths
- Soft face hammers
- Layout compasses
- Vernier calipers
- Dial calipers
- Flat head screwdrivers
- Theodolites
- Annealing ovens
- Lasers
- Digital calipers
- Terminal computers
- Offset screwdrivers
- Accelerometer sensors
- Welding torches
- Gyroscopes
- Countersinks
- Personal computers
- Dye penetrant inspection equipment
- Thread gauges
- Snap gauges
- Accelerometers
- Ball peen hammers
- Straight chisels
- Strain gauge balances
- Reed and Prince screwdrivers
- Open end wrenches
- Plug taps
- Micrometers
- Impact hammers
- Body harnesses
- Knife files
- Bore gauges
- Torque wrenches
- Voltmeters
- Torx drivers
- Box end wrenches
- Gantry mills
- Aviation snips
- Depth micrometers
- Taper taps
- Round files
- Multi-axis mills
- Skin mills
- Go/no-go gauges
- Force transducers
- Protractors
- Digital force gauges
- Twist drills
- Small hole gauges
- Vibration tables
- Magnetic particle inspection equipment
- Shot peening equipment
- Electronic torque testers
- Straightedges
- Purifying respirators
- Aligning punches
- Flat files
- Prick punches
- Thermocouples
- Overhead cranes
- Combination wrenches
- Mill files
- Planer gauges
- Borescopes
- Air drills
- Gas arc welding equipment
- Telescopes
- Bench vises
- Allen wrenches
- Eddy current inspection equipment
- Safety lanyards
- Telescoping gauges
- Pin punches
- Spring calipers
- Dividers
- Mallets
- Forklifts
- Paint booths
- Mass spectrometers
- Hook spanner wrenches
- Digital height gauges
- Socket wrenches
- Vertical turret lathes VTL
- Flow meters
- Split dies
- Power screwdrivers
- Fire extinguishers
- Precision files
- Drill presses
- Bottoming taps
- Bubble emission inspection equipment
- Brazing equipment
- Pyrotechnic initiators
- Steel rules
- Microsoft PowerPoint
- Computer aided design CAD software
- Vibration analysis software
- Structured query language SQL
- Inventory software
- Microsoft Visio
- Microsoft Office
- Oracle Java
- Microsoft SQL Server
- Computerized numerical control CNC software
- Microsoft Excel
- Extensible markup language XML
- Microsoft Word
- UNIX
- Data acquisition software