Will “Maintenance Superintendent” be Replaced By Robots? 🤔
38% Chance of Automation
“Maintenance Superintendent” will probably not be replaced by robots.
This job is ranked #263 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply theory and principles of mechanical engineering to modify, develop, test, or calibrate machinery and equipment under direction of engineering staff or physical scientists.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3027.00
- The Mean Annual Wage in the U.S. is $ 57,180.00
- The Mean Hourly Wage is $ 27.00
- Currently, there are 45,510 people on this job
☝️ Information based on the reference occupation “Mechanical Engineering Technicians”.
Also Known As…
- Mechanical Engineering Technicians
- Research and Development Technician
- Process Technician
- Mechanical Designer
- Lab Technician
- Equipment Engineer
- Engineering Technician
- Engineering Technical Analyst
- Engineering Lab Technician
- Designer
- Design Engineer
- Tool Specialist
- Tool or Die Drawing Checker
- Tool Design Checker
- Tool Analyst
- Robotics Technician
- Research Mechanic
- Refrigeration Technician
- Proof Technician
- Process Engineering Technician
- Optomechanical Technician
- Motor Tester
- Molding Technician
- Mechanical Technician
- Mechanical Service Specialist
- Mechanical Engineer
- Manufacturing Engineer
- Maintenance Technician
- Maintenance Mechanic
- Machinist
- Laser/Electro-Optics Technician (LEOT)
- Laser Technician
- Industrial Multicraft Maintenance Technician
- Hydraulic Technician
- Heat Transfer Technician
- Gyroscopic Engineering Technician
- Gyroscope Technician
- Finite Element Analysis Modeling Specialist (FEA Modeling Specialist)
- Experimental Technician
- Engineering Drawings Checker
- Electric Motor Mechanic
- Die Drawing Checker
- Development Technician
- Certified Control Systems Technician
- Brinell Tester
- Automation Technician
- Auto Design Checker
Tasks for “Maintenance Superintendent”
- Read dials and meters to determine amperage, voltage, electrical output and input at specific operating temperature to analyze parts performance.
- Confer with technicians and submit reports of test results to engineering department and recommend design or material changes.
- Test equipment, using test devices attached to generator, voltage regulator, or other electrical parts, such as generators or spark plugs.
- Review project instructions and specifications to identify, modify and plan requirements fabrication, assembly and testing.
- Operate drill press, grinders, engine lathe, or other machines to modify parts tested or to fabricate experimental parts for testing.
- Analyze test results in relation to design or rated specifications and test objectives, and modify or adjust equipment to meet specifications.
- Draft detail drawing or sketch for drafting room completion or to request parts fabrication by machine, sheet or wood shops.
- Prepare parts sketches and write work orders and purchase requests to be furnished by outside contractors.
- Inspect lines and figures for clarity and return erroneous drawings to designer for correction.
- Discuss changes in design, method of manufacture and assembly, and drafting techniques and procedures with staff and coordinate corrections.
- Set up prototype and test apparatus and operate test controlling equipment to observe and record prototype test results.
- Record test procedures and results, numerical and graphical data, and recommendations for changes in product or test methods.
- Set up and conduct tests of complete units and components under operational conditions to investigate proposals for improving equipment performance.
- Devise, fabricate, and assemble new or modified mechanical components for products such as industrial machinery or equipment, and measuring instruments.
- Estimate cost factors including labor and material for purchased and fabricated parts and costs for assembly, testing, or installing.
- Calculate required capacities for equipment of proposed system to obtain specified performance and submit data to engineering personnel for approval.
- Review project instructions and blueprints to ascertain test specifications, procedures, and objectives, and test nature of technical problems such as redesign.
- Evaluate tool drawing designs by measuring drawing dimensions and comparing with original specifications for form and function using engineering skills.
Related Technology & Tools
- Vibration testers
- Belt sanders
- Utility knives
- Twist drills
- Drafting plotters
- High-voltage amplifiers
- Freon recovery equipment
- Metallographs
- Socket wrench sets
- C clamps
- Clamp-on ammeters
- Screw thread gauges
- Impact testers
- Snap gauges
- Ring gauges
- Long nose pliers
- Metal cutting taps
- Scroll saws
- Fluid meters
- Dial calipers
- Slip joint pliers
- Combination milling machines
- Twin-screw extruders
- Pedestal grinders
- Safety goggles
- Guided bend weld test units
- Taper plug gauges
- Programmable logic controllers PLC
- Hex keys
- Rotational molders
- Laptop computers
- Switched amplifiers
- Optical compound microscopes
- Signal generators
- Strain gauges
- Bend test fixtures
- Spot welders
- Claw hammers
- Power sheet metal shears
- Sine bars
- Electronic comparators
- Phillips head screwdrivers
- Anemometers
- Oxyacetylene welding equipment
- Locking pliers
- Offset screwdrivers
- Power shears
- Band saws
- Cylindrical grinders
- Scribers
- Vernier height gauges
- Torque meters
- Ultrasound inspection equipment
- Wire strippers
- Punch presses
- Hardness testers
- Adjustable wrenches
- Force sensors
- Go/no-go gauges
- Arc welding equipment
- Durometers
- Air compressors
- Injection molding machines
- Hacksaws
- Welding masks
- Oscilloscopes
- Dynamometers
- Lathes
- Plane-parallel gauge blocks
- Linear amplifiers
- Soldering equipment
- Screw gauge micrometers
- Steel rules
- Pressure sensors
- Brazing equipment
- Stick welding machines
- Load cells
- Mill files
- Signal conditioners
- Wire cutters
- Marking gauges
- Vacuum molders
- Dynamic mechanical analyzers DMA
- Computerized numerical control CNC vertical milling machines
- Rotameters
- Optical comparators
- Fatigue testers
- Coordinate measuring machines CMM
- Microprocessors
- Measuring tapes
- Compression testing machines
- Power grinders
- Personal computers
- Digitizing tablets
- Tungsten inert gas TIG welding equipment
- Dry rod ovens
- Screw pitch gauges
- Accelerometers
- Combination squares
- Portable welding equipment
- Gas welding equipment
- Granite surface plates
- Arc-joint pliers
- Micrometers
- Bore gauges
- Drill presses
- Straight screwdrivers
- Dial indicators
- Nut drivers
- Temperature sensors
- Extrusion machines
- Spirit levels
- Hydraulic universal testers
- Surface grinding machines
- Heat treatment furnaces
- Safety gloves
- Hand brakes
- Milling machines
- Power drills
- Center punches
- Track burning machines
- Sheet metal slitters
- Digital multimeters
- Layout squares
- Tensile testers
- Vernier calipers
- Metal inert gas MIG welding equipment
- Protractors
- Slotted screwdrivers
- Positioning jigs
- Polishing machines
- Shear testers
- Computerized numerical control CNC lathes
- Metal cutting dies
- C++
- Robotic control software
- PTC Creo Parametric
- Computer aided manufacturing CAM software
- The MathWorks MATLAB
- Autodesk Revit
- Web browser software
- Dassault Systems SOLIDWORKS
- Autodesk Inventor
- National Instruments LabVIEW
- Creo Parametric Pro/ENGINEER
- Computer aided design CAD software
- Microsoft Word
- Corel WordPerfect
- Microsoft Project
- CNC Mastercam
- MSC Software Adams
- Autodesk AutoCAD Mechanical
- IBM CATIA V5
- Computerized numerical control CNC programming software
- Three-dimensional 3D solid modeling software
- Microsoft PowerPoint
- SAP
- ANSYS Mechanical
- Spectral Dynamics STARModal
- Bentley MicroStation
- Soft Servo Systems LadderWorks PLC
- Microsoft Visual Basic
- Wolfram Research Mathematica
- Microsoft Office
- Spectral Dynamics STARAcoustics
- Microsoft Excel