Will “Drywall Boardhanger” be Replaced By Robots? 🤔
79% Chance of Automation
“Drywall Boardhanger” will probably be replaced by robots.
This job is ranked #433 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply plasterboard or other wallboard to ceilings or interior walls of buildings. Apply or mount acoustical tiles or blocks, strips, or sheets of shock-absorbing materials to ceilings and walls of buildings to reduce or reflect sound. Materials may be of decorative quality. Includes lathers who fasten wooden, metal, or rockboard lath to walls, ceilings or partitions of buildings to provide support base for plaster, fire-proofing, or acoustical material.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2081.00
- The Mean Annual Wage in the U.S. is $ 47,400.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 93,180 people on this job
☝️ Information based on the reference occupation “Drywall and Ceiling Tile Installers”.
Also Known As…
- Drywall and Ceiling Tile Installers
- Metal Stud Framer
- Metal Framer
- Exterior Interior Specialist
- Drywaller
- Drywall Mechanic
- Drywall Installer
- Drywall Hanger
- Drywall Finisher
- Dry Wall Installer
- Ceiling Installer
- Wood Lather
- Wire Lather
- Sheetrock Applicator
- Sheet Rocker
- Sheet Rock Sander
- Sheet Rock Nailer
- Sheet Rock Layer
- Sheet Rock Installer
- Sheet Rock Hanger
- Sheet Rock Finisher
- Sheet Rock Applier
- Sheet Rock Applicator
- Rockboard Lather
- Rock Lather
- Plaster Lather
- Metal Lather
- Metal Furrer
- Lather Apprentice
- Lather
- Lath Hand
- Interior Specialist
- Furrer
- Drywall Worker
- Drywall Taper
- Drywall Stripper
- Drywall Sander
- Drywall Professional
- Drywall Metal Stud Worker
- Drywall Carrier
- Drywall Applicator
- Acoustical Carpenter
Tasks for “Drywall Boardhanger”
- Apply or mount acoustical tile or blocks, strips, or sheets of shock-absorbing materials to ceilings or walls of buildings to reduce reflection of sound or to decorate rooms.
- Hang dry lines to wall moldings to guide positioning of main runners.
- Wash concrete surfaces before mounting tile to increase adhesive qualities of surfaces, using washing soda and zinc sulfate solution.
- Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
- Mount tile, using adhesives, or by nailing, screwing, stapling, or wire-tying lath directly to structural frameworks.
- Apply cement to backs of tiles and press tiles into place, aligning them with layout marks or joints of previously laid tile.
- Install metal lath where plaster applications will be exposed to weather or water, or for curved or irregular surfaces.
- Fit and fasten wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.
- Inspect furrings, mechanical mountings, or masonry surfaces for plumbness and level, using spirit or water levels.
- Seal joints between ceiling tiles and walls.
- Read blueprints or other specifications to determine methods of installation, work procedures, or material or tool requirements.
- Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
- Suspend angle iron grids or channel irons from ceilings, using wire.
- Fasten metal or rockboard lath to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wire-ties.
- Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights when necessary.
- Trim rough edges from wallboard to maintain even joints, using knives.
- Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.
- Cut metal or wood framing and trim to size, using cutting tools.
- Assemble or install metal framing or decorative trim for windows, doorways, or vents.
- Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.
- Scribe and cut edges of tile to fit walls where wall molding is not specified.
- Install blanket insulation between studs and tack plastic moisture barriers over insulation.
- Remove existing plaster, drywall, or paneling, using crowbars and hammers.
- Nail channels or wood furring strips to surfaces to provide mounting for tile.
- Coordinate work with drywall finishers who cover the seams between drywall panels.
- Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
Related Technology & Tools
- Mini lifters
- Taping knives
- Pistol hopper guns
- Wallboard saws
- Drywall scoring tools
- Corner knives
- Keyhole saws
- Outside corner trowels
- Adhesive guns
- Caulking guns
- Roll lifters
- Rotary sanders
- Drywall T-squares
- Chalk lines
- Drywall screw guns
- Ladders
- Drywall trowels
- Saber saws
- Torpedo levels
- Power drills
- Wipe-down knives
- Utility knives
- Trimming knives
- Rasps
- Staple guns
- Edge cutters
- Texture brushes
- Drywall ripping tools
- Automatic taping tools
- Drywall mud mixers
- Joint knives
- Drywall saws
- Pole sanders
- Chop saws
- Air compressors
- Inside corner trowels
- Wallboard T-squares
- Drywall hatchets
- Bullnose trowels
- Stilts
- Tin snips
- Notebook computers
- Safety harnesses
- Power hand sanders
- Circle cutters
- Laser printers
- Box beam levels
- Drywall jacks
- Personal digital assistants PDA
- Fan blade mixers
- Crowhead hammers
- Texture sprayers
- Wall scrapers
- Tablet computers
- Personal computers
- Heavy duty staple guns
- Respirators
- Hacksaws
- Drywall hammers
- Texture guns
- Tape measures
- Drywall lifts
- Drywall routers
- Scaffolding
- Feather edge drywall darbies
- Drywall screwdrivers
- Microsoft Windows
- Wilhelm Publishing Threshold
- Logic Group Scanner Digitizing Software
- Job costing software
- Turtle Creek Software Goldenseal
- Construction Software Center EasyEst
- On Center Quick Bid
- Business management software
- Microsoft Word
- Microsoft Office
- DevWave Estimate Works