Will “Furrer” be Replaced By Robots? 🤔
79% Chance of Automation
“Furrer” will probably be replaced by robots.
This job is ranked #433 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply plasterboard or other wallboard to ceilings or interior walls of buildings. Apply or mount acoustical tiles or blocks, strips, or sheets of shock-absorbing materials to ceilings and walls of buildings to reduce or reflect sound. Materials may be of decorative quality. Includes lathers who fasten wooden, metal, or rockboard lath to walls, ceilings or partitions of buildings to provide support base for plaster, fire-proofing, or acoustical material.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2081.00
- The Mean Annual Wage in the U.S. is $ 47,400.00
- The Mean Hourly Wage is $ 22.00
- Currently, there are 93,180 people on this job
☝️ Information based on the reference occupation “Drywall and Ceiling Tile Installers”.
Also Known As…
- Drywall and Ceiling Tile Installers
- Metal Stud Framer
- Metal Framer
- Exterior Interior Specialist
- Drywaller
- Drywall Mechanic
- Drywall Installer
- Drywall Hanger
- Drywall Finisher
- Dry Wall Installer
- Ceiling Installer
- Wood Lather
- Wire Lather
- Sheetrock Applicator
- Sheet Rocker
- Sheet Rock Sander
- Sheet Rock Nailer
- Sheet Rock Layer
- Sheet Rock Installer
- Sheet Rock Hanger
- Sheet Rock Finisher
- Sheet Rock Applier
- Sheet Rock Applicator
- Rockboard Lather
- Rock Lather
- Plaster Lather
- Metal Lather
- Metal Furrer
- Lather Apprentice
- Lather
- Lath Hand
- Interior Specialist
- Drywall Worker
- Drywall Taper
- Drywall Stripper
- Drywall Sander
- Drywall Professional
- Drywall Metal Stud Worker
- Drywall Carrier
- Drywall Boardhanger
- Drywall Applicator
- Acoustical Carpenter
Tasks for “Furrer”
- Apply cement to backs of tiles and press tiles into place, aligning them with layout marks or joints of previously laid tile.
- Inspect furrings, mechanical mountings, or masonry surfaces for plumbness and level, using spirit or water levels.
- Install blanket insulation between studs and tack plastic moisture barriers over insulation.
- Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.
- Remove existing plaster, drywall, or paneling, using crowbars and hammers.
- Coordinate work with drywall finishers who cover the seams between drywall panels.
- Suspend angle iron grids or channel irons from ceilings, using wire.
- Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
- Assemble or install metal framing or decorative trim for windows, doorways, or vents.
- Wash concrete surfaces before mounting tile to increase adhesive qualities of surfaces, using washing soda and zinc sulfate solution.
- Cut metal or wood framing and trim to size, using cutting tools.
- Seal joints between ceiling tiles and walls.
- Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
- Fit and fasten wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.
- Fasten metal or rockboard lath to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wire-ties.
- Trim rough edges from wallboard to maintain even joints, using knives.
- Hang dry lines to wall moldings to guide positioning of main runners.
- Mount tile, using adhesives, or by nailing, screwing, stapling, or wire-tying lath directly to structural frameworks.
- Read blueprints or other specifications to determine methods of installation, work procedures, or material or tool requirements.
- Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.
- Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
- Apply or mount acoustical tile or blocks, strips, or sheets of shock-absorbing materials to ceilings or walls of buildings to reduce reflection of sound or to decorate rooms.
- Install metal lath where plaster applications will be exposed to weather or water, or for curved or irregular surfaces.
- Scribe and cut edges of tile to fit walls where wall molding is not specified.
- Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights when necessary.
- Nail channels or wood furring strips to surfaces to provide mounting for tile.
Related Technology & Tools
- Torpedo levels
- Circle cutters
- Power hand sanders
- Rasps
- Air compressors
- Heavy duty staple guns
- Wallboard T-squares
- Automatic taping tools
- Mini lifters
- Texture brushes
- Drywall hatchets
- Feather edge drywall darbies
- Drywall mud mixers
- Fan blade mixers
- Texture sprayers
- Keyhole saws
- Pole sanders
- Chalk lines
- Inside corner trowels
- Drywall hammers
- Drywall screw guns
- Edge cutters
- Corner knives
- Caulking guns
- Saber saws
- Texture guns
- Taping knives
- Laser printers
- Roll lifters
- Utility knives
- Power drills
- Drywall routers
- Box beam levels
- Adhesive guns
- Tape measures
- Chop saws
- Safety harnesses
- Notebook computers
- Tablet computers
- Drywall T-squares
- Respirators
- Crowhead hammers
- Pistol hopper guns
- Tin snips
- Drywall ripping tools
- Drywall screwdrivers
- Drywall jacks
- Rotary sanders
- Ladders
- Outside corner trowels
- Trimming knives
- Stilts
- Wipe-down knives
- Personal computers
- Wall scrapers
- Wallboard saws
- Drywall lifts
- Hacksaws
- Bullnose trowels
- Personal digital assistants PDA
- Staple guns
- Joint knives
- Drywall scoring tools
- Drywall saws
- Scaffolding
- Drywall trowels
- Microsoft Office
- Microsoft Windows
- Microsoft Word
- Business management software
- On Center Quick Bid
- Job costing software
- DevWave Estimate Works
- Logic Group Scanner Digitizing Software
- Construction Software Center EasyEst
- Turtle Creek Software Goldenseal
- Wilhelm Publishing Threshold