Will “Artisan” be Replaced By Robots? 🤔
84% Chance of Automation
“Artisan” will probably be replaced by robots.
This job is ranked #475 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply interior or exterior plaster, cement, stucco, or similar materials. May also set ornamental plaster.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2161.00
- The Mean Annual Wage in the U.S. is $ 44,070.00
- The Mean Hourly Wage is $ 21.00
- Currently, there are 22,810 people on this job
☝️ Information based on the reference occupation “Plasterers and Stucco Masons”.
Also Known As…
- Plasterers and Stucco Masons
- Plastering Contractor
- Plasterer Journeyman
- Plasterer Foreman
- Plasterer
- Plaster Mechanic
- Plaster Foreman
- Plaster Applicator
- Plaster and Stucco Worker
- Artisan Plasterer
- Applicator
- Synthetic Plasterer
- Stucco Worker
- Stucco Plasterer
- Stucco Applicator
- Poured Wall Foreman
- Plasterer Apprentice
- Plaster Molder
- Molding Plasterer
- Modeler
- Mason
- Dry Plasterer
Tasks for “Artisan”
- Cover surfaces such as windows, doors, or sidewalks to protect from splashing.
- Cure freshly plastered surfaces.
- Apply insulation to building exteriors by installing prefabricated insulation systems over existing walls or by covering the outer wall with insulation board, reinforcing mesh, and a base coat.
- Determine materials needed to complete the job and place orders accordingly.
- Mold or install ornamental plaster pieces, panels, or trim.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Apply weatherproof, decorative coverings to exterior surfaces of buildings, such as by troweling or spraying on coats of stucco.
- Create decorative textures in finish coat, using brushes or trowels, sand, pebbles, or stones.
- Mix mortar and plaster to desired consistency or direct workers who perform mixing.
- Install guide wires on exterior surfaces of buildings to indicate thickness of plaster or stucco and nail wire mesh, lath, or similar materials to the outside surface to hold stucco in place.
- Spray acoustic materials or texture finish over walls or ceilings.
- Clean job sites.
- Set up scaffolds.
- Rough the undercoat surface with a scratcher so the finish coat will adhere.
- Apply coats of plaster or stucco to walls, ceilings, or partitions of buildings, using trowels, brushes, or spray guns.
Related Technology & Tools
- Power trowels
- Chalk lines
- Plaster spraying machines
- Joint knives
- Straightedges
- Power drills
- Notebook computers
- Plumb bobs
- Claw hammers
- Lime brushes
- Scratcher trowels
- Utility knives
- Plaster molds
- Ornamental cut and shape tools
- Scraping tools
- Stilts
- Screeds
- Personal computers
- Ladders
- Rulers
- Heat guns
- Power sanders
- Floats
- Darbies
- Featheredgers
- Hand trowels
- Plaster mixers
- T-squares
- Scaffolding
- Spray guns
- Keyhole saws
- Precision levels
- Hand saws
- Outside step tools
- Piston pumps
- Corner tools
- Nail guns
- Inside step tools
- Plasterers' hammers
- Nose step tools
- Trimming knives
- Cost estimating software
- Sage Construction Anywhere
- Turtle Creek Software Goldenseal
- A-Systems JobView
- Construction Software Center EasyEst