Will “Plasterer Journeyman” be Replaced By Robots? 🤔
84% Chance of Automation
“Plasterer Journeyman” will probably be replaced by robots.
This job is ranked #475 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply interior or exterior plaster, cement, stucco, or similar materials. May also set ornamental plaster.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2161.00
- The Mean Annual Wage in the U.S. is $ 44,070.00
- The Mean Hourly Wage is $ 21.00
- Currently, there are 22,810 people on this job
☝️ Information based on the reference occupation “Plasterers and Stucco Masons”.
Also Known As…
- Plasterers and Stucco Masons
- Plastering Contractor
- Plasterer Foreman
- Plasterer
- Plaster Mechanic
- Plaster Foreman
- Plaster Applicator
- Plaster and Stucco Worker
- Artisan Plasterer
- Applicator
- Synthetic Plasterer
- Stucco Worker
- Stucco Plasterer
- Stucco Applicator
- Poured Wall Foreman
- Plasterer Journeyman
- Plasterer Apprentice
- Plaster Molder
- Molding Plasterer
- Modeler
- Mason
- Dry Plasterer
- Artisan
Tasks for “Plasterer Journeyman”
- Cure freshly plastered surfaces.
- Spray acoustic materials or texture finish over walls or ceilings.
- Determine materials needed to complete the job and place orders accordingly.
- Create decorative textures in finish coat, using brushes or trowels, sand, pebbles, or stones.
- Mix mortar and plaster to desired consistency or direct workers who perform mixing.
- Mold or install ornamental plaster pieces, panels, or trim.
- Cover surfaces such as windows, doors, or sidewalks to protect from splashing.
- Apply weatherproof, decorative coverings to exterior surfaces of buildings, such as by troweling or spraying on coats of stucco.
- Apply coats of plaster or stucco to walls, ceilings, or partitions of buildings, using trowels, brushes, or spray guns.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Rough the undercoat surface with a scratcher so the finish coat will adhere.
- Apply insulation to building exteriors by installing prefabricated insulation systems over existing walls or by covering the outer wall with insulation board, reinforcing mesh, and a base coat.
- Clean job sites.
- Install guide wires on exterior surfaces of buildings to indicate thickness of plaster or stucco and nail wire mesh, lath, or similar materials to the outside surface to hold stucco in place.
- Set up scaffolds.
Related Technology & Tools
- Spray guns
- Ladders
- Claw hammers
- Lime brushes
- Nose step tools
- Screeds
- Plaster mixers
- T-squares
- Plumb bobs
- Scaffolding
- Plasterers' hammers
- Straightedges
- Scratcher trowels
- Stilts
- Corner tools
- Notebook computers
- Hand trowels
- Chalk lines
- Scraping tools
- Outside step tools
- Trimming knives
- Joint knives
- Power sanders
- Ornamental cut and shape tools
- Utility knives
- Darbies
- Inside step tools
- Power trowels
- Floats
- Plaster molds
- Keyhole saws
- Power drills
- Heat guns
- Rulers
- Personal computers
- Featheredgers
- Precision levels
- Hand saws
- Nail guns
- Plaster spraying machines
- Piston pumps
- Sage Construction Anywhere
- Turtle Creek Software Goldenseal
- A-Systems JobView
- Construction Software Center EasyEst
- Cost estimating software