Will “Structural Steel Worker” be Replaced By Robots? 🤔
83% Chance of Automation
“Structural Steel Worker” will probably be replaced by robots.
This job is ranked #457 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2221.00
- The Mean Annual Wage in the U.S. is $ 56,040.00
- The Mean Hourly Wage is $ 26.00
- Currently, there are 69,440 people on this job
☝️ Information based on the reference occupation “Structural Iron and Steel Workers”.
Also Known As…
- Structural Iron and Steel Workers
- Tower Hand
- Structural Steel Erector
- Steel Worker
- Steel Fabricator
- Rigger
- Ironworker
- Iron Worker Foreman
- Iron Worker
- Fitter / Welder
- Fitter
- Wind Turbine Erector
- Tank Setter
- Structural Worker
- Structural Steel Ironworker
- Structural Steel Fitter
- Structural Rigger
- Structural Metal Worker
- Structural Layout Worker
- Structural Ironworker
- Structural Iron Erector
- Steel Rigger
- Steel Layout Worker
- Steel Hanger
- Steel Fitter
- Steel Construction Worker
- Sign Installer
- Sign Hanger
- Sign Erector
- Sign Builder
- Sign Board Erector
- Sheet Ironworker
- Scaffold Erector
- Precast Concrete Ironworker
- Pre-Engineered Metal Building Ironworker
- Playground Equipment Erector
- Ornamental Metal Worker
- Ornamental Metal Erector
- Ornamental Ironworker
- Ornamental Iron Erector
- Oil Field Rig Builder
- Metalsmith
- Metal Trim Erector
- Metal Tank Erector
- Metal Tank Builder
- Metal Buildings Assembler
- Layout Worker
- Joist Setter
- Iron Worker Apprentice
- Iron Setter
- Iron Guardrail Installer
- Iron Erector
- Housesmith
- Guzzler Builder
- Guard Rail Installer
- Construction Ironworker
- Combination Worker
- Building Construction Ironworker
- Bridgeman
- Bridge Maintainer
- Bridge Ironworker
- Bolter
- Billboard Mechanic
- Billboard Installer
- Billboard Erector
- Awnings Mechanic
- Assembler
Tasks for “Structural Steel Worker”
- Fasten structural steel members to hoist cables, using chains, cables, or rope.
- Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
- Assemble hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
- Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
- Force structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools.
- Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment.
- Ride on girders or other structural steel members to position them or use rope to guide them into position.
- Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
- Insert sealing strips, wiring, insulating material, ladders, flanges, gauges, or valves, depending on types of structures being assembled.
- Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
- Unload and position prefabricated steel units for hoisting as needed.
- Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.
- Place blocks under reinforcing bars used to reinforce floors.
- Dismantle structures or equipment.
- Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
- Catch hot rivets in buckets and insert rivets in holes, using tongs.
- Pull, push, or pry structural steel members into approximate positions for bolting into place.
- Drive drift pins through rivet holes to align rivet holes in structural steel members with corresponding holes in previously placed members.
- Hoist steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
- Hold rivets while riveters use air hammers to form heads on rivets.
Related Technology & Tools
- Decoilers
- Robertson screwdrivers
- Power grinders
- Welding gloves
- Hacksaws
- Slings
- Hard hats
- Single-cut mill saw files
- Scaffolding
- Hydraulic pumps
- Tape measures
- Forging dies
- Electric drills
- Center punches
- Bull pins
- Combination squares
- Pipe wrenches
- Personal computers
- Spreader beams
- Laser levels
- Side cutting pliers
- Rivet busters
- Spud wrenches
- Safety belts
- Power lifts
- Workshop cranes
- Ear plugs
- Crowbars
- Plumb bobs
- Drift pins
- Safety lanyards
- Fire extinguishers
- Jacks
- Life preservers
- Two way radios
- Phillips head screwdrivers
- Swing stages
- Hammers
- Pneumatic hammers
- Stressing jacks
- Air compressors
- Welding helmets
- Sledgehammers
- Protective harnesses
- Plasma cutters
- Welding tips
- Tin snips
- Grout mixers
- Tongs
- Protective coveralls
- Cutoff saws
- Tuggers
- Rubber mallets
- Portable welding machines
- Notebook computers
- Torpedo levels
- Socket wrench sets
- Scribers
- C clamps
- Strikers
- Squares
- Blow torches
- Safety gloves
- Welding hoods
- Rivet tongs
- Utility knives
- Winches
- Flat head screwdrivers
- Vise grip pliers
- Adjustable widemouth pliers
- Open end wrenches
- Safety boots
- Rivet guns
- Wire brushes
- Rod ovens
- Chalk lines
- Ladders
- Cold chisels
- Respirators
- Adjustable wrenches
- Safety glasses
- Bolt cutters
- Staple guns
- Project scheduling software
- Turtle Creek Software Goldenseal
- Inventory tracking software
- Computer aided design CAD software
- Cost estimating software