Will “Structural Worker” be Replaced By Robots? 🤔
83% Chance of Automation
“Structural Worker” will probably be replaced by robots.
This job is ranked #457 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2221.00
- The Mean Annual Wage in the U.S. is $ 56,040.00
- The Mean Hourly Wage is $ 26.00
- Currently, there are 69,440 people on this job
☝️ Information based on the reference occupation “Structural Iron and Steel Workers”.
Also Known As…
- Structural Iron and Steel Workers
- Tower Hand
- Structural Steel Erector
- Steel Worker
- Steel Fabricator
- Rigger
- Ironworker
- Iron Worker Foreman
- Iron Worker
- Fitter / Welder
- Fitter
- Wind Turbine Erector
- Tank Setter
- Structural Steel Worker
- Structural Steel Ironworker
- Structural Steel Fitter
- Structural Rigger
- Structural Metal Worker
- Structural Layout Worker
- Structural Ironworker
- Structural Iron Erector
- Steel Rigger
- Steel Layout Worker
- Steel Hanger
- Steel Fitter
- Steel Construction Worker
- Sign Installer
- Sign Hanger
- Sign Erector
- Sign Builder
- Sign Board Erector
- Sheet Ironworker
- Scaffold Erector
- Precast Concrete Ironworker
- Pre-Engineered Metal Building Ironworker
- Playground Equipment Erector
- Ornamental Metal Worker
- Ornamental Metal Erector
- Ornamental Ironworker
- Ornamental Iron Erector
- Oil Field Rig Builder
- Metalsmith
- Metal Trim Erector
- Metal Tank Erector
- Metal Tank Builder
- Metal Buildings Assembler
- Layout Worker
- Joist Setter
- Iron Worker Apprentice
- Iron Setter
- Iron Guardrail Installer
- Iron Erector
- Housesmith
- Guzzler Builder
- Guard Rail Installer
- Construction Ironworker
- Combination Worker
- Building Construction Ironworker
- Bridgeman
- Bridge Maintainer
- Bridge Ironworker
- Bolter
- Billboard Mechanic
- Billboard Installer
- Billboard Erector
- Awnings Mechanic
- Assembler
Tasks for “Structural Worker”
- Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
- Hold rivets while riveters use air hammers to form heads on rivets.
- Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
- Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.
- Force structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools.
- Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment.
- Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
- Fasten structural steel members to hoist cables, using chains, cables, or rope.
- Ride on girders or other structural steel members to position them or use rope to guide them into position.
- Hoist steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
- Drive drift pins through rivet holes to align rivet holes in structural steel members with corresponding holes in previously placed members.
- Unload and position prefabricated steel units for hoisting as needed.
- Place blocks under reinforcing bars used to reinforce floors.
- Pull, push, or pry structural steel members into approximate positions for bolting into place.
- Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
- Dismantle structures or equipment.
- Catch hot rivets in buckets and insert rivets in holes, using tongs.
- Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
- Insert sealing strips, wiring, insulating material, ladders, flanges, gauges, or valves, depending on types of structures being assembled.
- Assemble hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
Related Technology & Tools
- C clamps
- Rubber mallets
- Flat head screwdrivers
- Stressing jacks
- Jacks
- Electric drills
- Combination squares
- Tongs
- Grout mixers
- Decoilers
- Drift pins
- Cutoff saws
- Hammers
- Socket wrench sets
- Safety gloves
- Portable welding machines
- Winches
- Crowbars
- Welding tips
- Torpedo levels
- Vise grip pliers
- Welding gloves
- Pneumatic hammers
- Phillips head screwdrivers
- Bolt cutters
- Open end wrenches
- Slings
- Respirators
- Two way radios
- Tape measures
- Wire brushes
- Robertson screwdrivers
- Scribers
- Spud wrenches
- Sledgehammers
- Side cutting pliers
- Center punches
- Ladders
- Blow torches
- Utility knives
- Spreader beams
- Ear plugs
- Laser levels
- Forging dies
- Plumb bobs
- Welding hoods
- Notebook computers
- Adjustable widemouth pliers
- Tuggers
- Protective harnesses
- Welding helmets
- Rivet guns
- Safety lanyards
- Pipe wrenches
- Scaffolding
- Bull pins
- Cold chisels
- Safety boots
- Tin snips
- Rivet busters
- Adjustable wrenches
- Rivet tongs
- Power grinders
- Rod ovens
- Single-cut mill saw files
- Air compressors
- Fire extinguishers
- Personal computers
- Workshop cranes
- Squares
- Hydraulic pumps
- Swing stages
- Safety glasses
- Staple guns
- Protective coveralls
- Safety belts
- Hacksaws
- Strikers
- Hard hats
- Life preservers
- Power lifts
- Chalk lines
- Plasma cutters
- Cost estimating software
- Inventory tracking software
- Project scheduling software
- Turtle Creek Software Goldenseal
- Computer aided design CAD software