Will “Driller” be Replaced By Robots? 🤔

80% Chance of Automation

“Driller” will probably be replaced by robots.

This job is ranked #440 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Rig derrick equipment and operate pumps to circulate mud through drill hole.

☝️ Information based on the reference occupation “Derrick Operators, Oil and Gas”.

Start pumps that circulate mud through drill pipes and boreholes to cool drill bits and flush out drill cuttings.
Guide lengths of pipe into and out of elevators.
Control the viscosity and weight of the drilling fluid.
Inspect derricks for flaws, and clean and oil derricks to maintain proper working conditions.
Supervise crew members, and provide assistance in training them.
Repair pumps, mud tanks, and related equipment.
Listen to mud pumps and check regularly for vibration and other problems to ensure that rig pumps and drilling mud systems are working properly.
Steady pipes during connection to or disconnection from drill or casing strings.
Clamp holding fixtures on ends of hoisting cables.
Position and align derrick elements, using harnesses and platform climbing devices.
String cables through pulleys and blocks.
Weigh clay, and mix with water and chemicals to make drilling mud, using portable mixers.
Set and bolt crown blocks to posts at tops of derricks.
Prepare mud reports, and instruct crews about the handling of any chemical additives.
Inspect derricks, or order their inspection, prior to being raised or lowered.