Will “Floor Hand” be Replaced By Robots? 🤔

80% Chance of Automation

“Floor Hand” will probably be replaced by robots.

This job is ranked #440 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Rig derrick equipment and operate pumps to circulate mud through drill hole.

☝️ Information based on the reference occupation “Derrick Operators, Oil and Gas”.

Listen to mud pumps and check regularly for vibration and other problems to ensure that rig pumps and drilling mud systems are working properly.
Steady pipes during connection to or disconnection from drill or casing strings.
Prepare mud reports, and instruct crews about the handling of any chemical additives.
Inspect derricks for flaws, and clean and oil derricks to maintain proper working conditions.
Repair pumps, mud tanks, and related equipment.
Start pumps that circulate mud through drill pipes and boreholes to cool drill bits and flush out drill cuttings.
Inspect derricks, or order their inspection, prior to being raised or lowered.
Supervise crew members, and provide assistance in training them.
Weigh clay, and mix with water and chemicals to make drilling mud, using portable mixers.
Control the viscosity and weight of the drilling fluid.
String cables through pulleys and blocks.
Guide lengths of pipe into and out of elevators.
Clamp holding fixtures on ends of hoisting cables.
Set and bolt crown blocks to posts at tops of derricks.
Position and align derrick elements, using harnesses and platform climbing devices.