-
Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
-
Level bedplate and establish centerline, using straightedge, levels, and transit.
-
Assemble and install equipment, using hand tools and power tools.
-
Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
-
Dismantle machinery and equipment for shipment to installation site, performing installation and maintenance work as part of team.
-
Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
-
Lay out mounting holes, using measuring instruments, and drill holes with power drill.
-
Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures.
-
Weld, repair, and fabricate equipment or machinery.
-
Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment.
-
Conduct preventative maintenance and repair, and lubricate machines and equipment.
-
Replace defective parts of machine, or adjust clearances and alignment of moving parts.
-
Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
-
Move machinery and equipment, using hoists, dollies, rollers, and trucks.
-
Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
-
Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
-
Install robot and modify its program, using teach pendant.
-
Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
-
Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
-
Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs.
-
Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
-
Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
-
Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.