Will “Refrigeration Operator” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Install and repair industrial and commercial refrigerating systems.
Job Details
- The SOC (Standard Occupational Classification) code is 49-9021.02
☝️ Information based on the reference occupation “Refrigeration Mechanics and Installers”.
Also Known As…
- Refrigeration Mechanics and Installers
- Transportation Refrigeration Technician
- Service Technician
- Refrigeration Technician
- Refrigeration Operator
- Refrigeration Mechanic
- HVAC/R Service Technician (Heating, Ventilation, and Air Conditioning/Refrigeration Service Technician)
- Heating, Ventilation, Air Conditioning Technician (HVAC Technician)
- Heating, Ventilation, Air Conditioning Service Technician (HVAC Service Technician)
- Heating, Ventilation, Air Conditioning / Refrigeration Technician (HVAC / R Technician)
- Ammonia Refrigeration Technician
- VRT Mechanic (Variable Retention Time Mechanic)
- Technician
- Repair Servicer
- Refrigeration Unit Repairer
- Refrigeration Installer
- Refrigeration Engineer
- Mechanic
- HVAC Service Technician (Heating, Ventilation, and Air Conditioning Service Technician)
- HVAC Mechanic (Heating, Ventilation, and Air Conditioning Mechanic)
- Heating, Ventilation, Air Conditioning Mechanic (HVAC Mechanic)
- Field Service Technician
- Commercial Service Technician
- Bulk Coolers Installer
Tasks for “Refrigeration Operator”
- Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition.
- Observe and test system operation, using gauges and instruments.
- Drill holes and install mounting brackets and hangers into floor and walls of building.
- Adjust valves according to specifications and charge system with proper type of refrigerant by pumping the specified gas or fluid into the system.
- Perform mechanical overhauls and refrigerant reclaiming.
- Test lines, components, and connections for leaks.
- Install wiring to connect components to an electric power source.
- Supervise and instruct assistants.
- Adjust or replace worn or defective mechanisms and parts and reassemble repaired systems.
- Cut, bend, thread, and connect pipe to functional components and water, power, or refrigeration system.
- Dismantle malfunctioning systems and test components, using electrical, mechanical, and pneumatic testing equipment.
- Lay out reference points for installation of structural and functional components, using measuring instruments.
- Mount compressor, condenser, and other components in specified locations on frames, using hand tools and acetylene welding equipment.
- Keep records of repairs and replacements made and causes of malfunctions.
- Read blueprints to determine location, size, capacity, and type of components needed to build refrigeration system.
- Schedule work with customers and initiate work orders, house requisitions, and orders from stock.
- Fabricate and assemble structural and functional components of refrigeration system, using hand tools, power tools, and welding equipment.
- Install expansion and control valves, using acetylene torches and wrenches.
- Lift and align components into position, using hoist or block and tackle.
- Insulate shells and cabinets of systems.
- Braze or solder parts to repair defective joints and leaks.
Related Technology & Tools
- Straightedges
- Scrapers
- Belt tension indicators
- Water temperature gauges
- Power drills
- Strobe tachometers
- Brazing equipment
- Scale rules
- Vibration analyis equipment
- Adjustable widemouth pliers
- Flaring tools
- Transfer pumps
- Scribers
- Pitot tubes
- Psychrometers
- Tap sets
- Safety glasses
- Safety belts
- Electric drills
- Bandsaws
- Hand trucks
- Bolt cutters
- Laser levels
- Pipe dies
- Manometers
- Two way radios
- Pressure simulators
- Staging equipment
- Forklifts
- Reamers
- Material alignment jigs
- Combustion analyzers
- Ground fault circuit interrupter GFCI testers
- Volt-ohm meters VOM
- Wattmeters
- Dial indicators
- Hacksaws
- Gas pressure gauges
- Scaffolding
- Hammers
- Temperature gauges
- Tape measures
- Plotters
- Power washers
- Grease guns
- Charging manifolds
- Dataloggers
- Torque wrenches
- Spectrometers
- Ladders
- Litmus papers
- Drill bit sets
- Capacitance testers
- Service manifold sets
- Vacuum pumps
- Screwdrivers
- Water levels
- Power saws
- Jacks
- Tube cutters
- Safety harnesses
- Laser printers
- Transit levels
- Refrigerant oil pumps
- Oxygen testers
- Rulers
- Infrared thermography cameras and display units
- Multimeters
- Wire strippers
- Telescoping boom trucks
- Conduit benders
- Smoke testers
- Air compressors
- Calipers
- Side cutting pliers
- Knockout punches
- Mechanical stethoscopes
- Velometers
- Tin snips
- Squares
- Labeling machines
- Wire brushes
- Punches
- Vernier calipers
- Slings
- Carbon monoxide evaluators
- Air volume test equipment
- Safety goggles
- Industrial vacuums
- Watt transducers
- Micrometers
- Lug crimping tool dies
- Reciprocating saws
- Fall arrest lines
- Magnehelic gauges
- Milliammeters
- Open end wrenches
- Air flow hoods
- Voltage simulators
- Handheld thermometers
- Personal computers
- Decibel meters
- Wire cutters
- Caulking guns
- Glue guns
- Draft gauges
- Hold down clamps
- Laptop computers
- Nut drivers
- Soldering irons
- Staging winches
- Pipe cutters
- Vacuum gauges
- Respirators
- Acetylene torches
- Hoists
- Fin combs
- Hole saws
- Megohmmeters
- Valve wrenches
- Fish tapes
- Socket wrench sets
- Bubble levels
- Cordless drills
- Current simulators
- Crowbars
- Soldering guns
- Cold chisels
- Micron gauges
- Pipe threaders
- Utility knives
- Feeler gauges
- Tachometers
- Recovery and recycle units
- Adjustable wrenches
- Black lights
- Carbon dioxide CO2 testers
- Swaging tools
- Pullers
- Chalk lines
- Precision levels
- Flowmeters
- Ammeters
- Platform lifts
- Compound gauges
- Anemometers
- Refrigerant leak detectors
- Electrical frequency indicators
- Pipe wrenches
- Shackles
- Temperature simulators
- Hand sprayers
- Portable refractometers
- Phase rotation meters
- Potentiometers
- Computer diagnostic devices
- Screw extractor sets
- Thermocouple testers
- Humidity simulators
- Charging cylinders
- Image scanners
- Hand drills
- Allen wrenches
- Microsoft Excel
- Johnson Controls Metasys
- Facility energy management software
- Microsoft Office
- Database software