Will “Silversmith” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Cast, anneal, solder, hammer, or shape gold, silver, pewter or other metals to form jewelry or other metal items such as goblets or candlesticks.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9071.07
☝️ Information based on the reference occupation “Precious Metal Workers”.
Also Known As…
- Precious Metal Workers
- Silversmith
- Restoration Silversmith
- Platinum Smith
- Pewterer
- Goldsmith
- Fabricator
- Caster
- Bench Mechanic
- Artist
- Stone Setter
- Stamper
- Special Order Jeweler
- Solderer
- Silversmith Apprentice
- Polisher
- Platinumsmith
- Pewter Finisher
- Pewter Fabricator
- Pewter Caster
- Mold Maker
- Metal Polisher
- Metal Finisher
- Metal Engraver
- Jewelsmith
- Jewelry Repairer
- Jewelry Maker
- Jewelry Finisher
- Jewelry Designer
- Jeweler
- Hammersmith
- Goldsmith Apprentice
- Engraver
- Chaser
- Bronze Chaser
- Brass Chaser
- Bench Jeweler
Tasks for “Silversmith”
- Weigh completed items to determine weights and record any deviations.
- Shape and straighten damaged or twisted articles by hand or using pliers.
- Hammer out dents and bulges, selecting and using hammers and dollies with heads that correspond in curvature to article surfaces.
- Wire parts such as legs, spouts, and handles to article bodies in preparation for soldering.
- Strike molds to separate dried castings from molds.
- Strike articles with small tools, or punch them with hammers, to indent them or restore embossing.
- Glue plastic separators to handles of coffeepots and teapots.
- Verify that bottom edges of articles are level, using straightedges or by rocking them back and forth on flat surfaces.
- Anneal precious metal objects such as coffeepots, tea sets, and trays in gas ovens for prescribed times to soften metal for reworking.
- Heat ingots or alloy mixtures to specified temperatures, stir mixtures, skim off impurities, and fill molds to form ingots from which parts are cast.
- Determine placement of auxiliary parts, such as handles and spouts, and mark locations of parts.
- Carry castings or finished items to storage areas or to different work stations.
- Weigh and mix alloy ingredients, using formulas and knowledge of ingredients' chemical properties.
- Design silver articles, such as jewelry and serving pieces.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Assemble molds, wrap molds in heat-resistant cloth, and ladle molten alloy into mold openings, repeating casting processes as necessary to produce specified numbers of parts.
- Peen edges of scratches or holes to repair defects, using peening hammers.
- Form concavities in bottoms of articles to improve stability, using tracing punches and hammers.
- Rout out locations where parts are to be joined to items, using routing machines.
- Engrave decorative lines on items, using engraving tools.
- Research reference materials, analyze production data, and consult with interested parties to develop ideas for new products.
- Position articles over snarling tools and raise design areas, using foot-powered hammers.
- Design and fabricate models of new casting molds, and chipping and turning tools used to finish product surfaces.
- Rotate molds to distribute alloys and to prevent formation of air pockets.
- Trim gates and sharp points from cast parts, using band saws.
- Sand interior mold parts to remove glaze residue, apply new glaze to molds, and allow it to dry for mold assembly.
- Secure molded items in chucks of lathes, and activate lathes to finish inner and outer surfaces of items.
- Solder parts together or fill holes and cracks with metal solder, using gas torches.
- Polish articles by hand or by using a polishing wheel.
- Examine articles to determine the nature of defects requiring repair, such as dents, uneven bottoms, scratches, or holes.
- Position and align auxiliary parts in jigs and join parts, using solder and blowtorches.
Related Technology & Tools
- Ring shank pliers
- Jewelers' loupes
- Peening hammers
- Embossing hammers
- Jewelry mandrels
- Flask tongs
- Wire cutters
- Jewelers' chain-nose pliers
- Wire gauges
- Adjustable bench vises
- Dapping punches
- Round nose pliers
- Double horn anvils
- Plastic mallets
- Split ring pliers
- Vibratory tumblers
- Looping pliers
- Hex anvils
- Straightedges
- Flush cutters
- Sidecutters
- Draw tongs
- Rolling mills
- Ring bending pliers
- Automatic lathes
- Precision files
- Flex shaft machines
- Ring clamps
- Flat horn anvils
- Soldering tweezers
- Foot-powered hammers
- Engraving tools
- Planishing hammers
- Digital calipers
- Tracing punches
- Crucible tongs
- Polishing wheels
- Flat nose pliers
- Jewelers screwdrivers
- Stone gauges
- Gold testers
- Head and shank tweezers
- Diamond tweezers
- Gas torches
- Riveting hammers
- Burnishers
- Stamping dies
- Beading pliers
- Ball peen hammers
- Bent chain nose pliers
- Mini band saws
- Locking tweezers
- Precision rulers
- Jewelers shears
- Bur gauges
- Binocular magnifiers
- Tongs
- Hand drills
- Stone setting pliers
- Silversmiths' hammers
- Rotary tumblers
- Hole punching pliers
- Dapping cutters
- Wire twisting pliers
- Parallel jaw pliers
- Dead-blow hammers
- Disc cutters
- Routing machines
- Jeweler's saws
- Microsoft Outlook
- Adobe Systems Adobe Photoshop
- Microsoft Excel
- Microsoft Word
- Web browser software
- Metal designing software
- Adobe Systems Adobe Illustrator