Will “Silversmith” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Cast, anneal, solder, hammer, or shape gold, silver, pewter or other metals to form jewelry or other metal items such as goblets or candlesticks.
Job Details
- The SOC (Standard Occupational Classification) code is 51-9071.07
☝️ Information based on the reference occupation “Precious Metal Workers”.
Also Known As…
- Precious Metal Workers
- Restoration Silversmith
- Platinum Smith
- Pewterer
- Goldsmith
- Fabricator
- Caster
- Bench Mechanic
- Artist
- Stone Setter
- Stamper
- Special Order Jeweler
- Solderer
- Silversmith Apprentice
- Silversmith
- Polisher
- Platinumsmith
- Pewter Finisher
- Pewter Fabricator
- Pewter Caster
- Mold Maker
- Metal Polisher
- Metal Finisher
- Metal Engraver
- Jewelsmith
- Jewelry Repairer
- Jewelry Maker
- Jewelry Finisher
- Jewelry Designer
- Jeweler
- Hammersmith
- Goldsmith Apprentice
- Engraver
- Chaser
- Bronze Chaser
- Brass Chaser
- Bench Jeweler
Tasks for “Silversmith”
- Form concavities in bottoms of articles to improve stability, using tracing punches and hammers.
- Anneal precious metal objects such as coffeepots, tea sets, and trays in gas ovens for prescribed times to soften metal for reworking.
- Shape and straighten damaged or twisted articles by hand or using pliers.
- Examine articles to determine the nature of defects requiring repair, such as dents, uneven bottoms, scratches, or holes.
- Weigh completed items to determine weights and record any deviations.
- Secure molded items in chucks of lathes, and activate lathes to finish inner and outer surfaces of items.
- Determine placement of auxiliary parts, such as handles and spouts, and mark locations of parts.
- Strike molds to separate dried castings from molds.
- Peen edges of scratches or holes to repair defects, using peening hammers.
- Glue plastic separators to handles of coffeepots and teapots.
- Design and fabricate models of new casting molds, and chipping and turning tools used to finish product surfaces.
- Carry castings or finished items to storage areas or to different work stations.
- Strike articles with small tools, or punch them with hammers, to indent them or restore embossing.
- Sand interior mold parts to remove glaze residue, apply new glaze to molds, and allow it to dry for mold assembly.
- Wire parts such as legs, spouts, and handles to article bodies in preparation for soldering.
- Weigh and mix alloy ingredients, using formulas and knowledge of ingredients' chemical properties.
- Design silver articles, such as jewelry and serving pieces.
- Engrave decorative lines on items, using engraving tools.
- Position articles over snarling tools and raise design areas, using foot-powered hammers.
- Solder parts together or fill holes and cracks with metal solder, using gas torches.
- Rout out locations where parts are to be joined to items, using routing machines.
- Hammer out dents and bulges, selecting and using hammers and dollies with heads that correspond in curvature to article surfaces.
- Pierce and cut open designs in ornamentation, using hand drills and scroll saws.
- Assemble molds, wrap molds in heat-resistant cloth, and ladle molten alloy into mold openings, repeating casting processes as necessary to produce specified numbers of parts.
- Rotate molds to distribute alloys and to prevent formation of air pockets.
- Verify that bottom edges of articles are level, using straightedges or by rocking them back and forth on flat surfaces.
- Research reference materials, analyze production data, and consult with interested parties to develop ideas for new products.
- Cut and file pieces of jewelry such as rings, brooches, bracelets, and lockets.
- Trim gates and sharp points from cast parts, using band saws.
- Position and align auxiliary parts in jigs and join parts, using solder and blowtorches.
- Heat ingots or alloy mixtures to specified temperatures, stir mixtures, skim off impurities, and fill molds to form ingots from which parts are cast.
- Polish articles by hand or by using a polishing wheel.
Related Technology & Tools
- Wire cutters
- Stone gauges
- Foot-powered hammers
- Routing machines
- Precision files
- Sidecutters
- Locking tweezers
- Jewelers screwdrivers
- Flat nose pliers
- Bent chain nose pliers
- Diamond tweezers
- Engraving tools
- Dead-blow hammers
- Peening hammers
- Embossing hammers
- Hex anvils
- Soldering tweezers
- Hole punching pliers
- Ball peen hammers
- Precision rulers
- Dapping punches
- Gold testers
- Double horn anvils
- Disc cutters
- Wire gauges
- Flask tongs
- Flex shaft machines
- Crucible tongs
- Plastic mallets
- Looping pliers
- Silversmiths' hammers
- Ring clamps
- Tongs
- Stone setting pliers
- Round nose pliers
- Automatic lathes
- Planishing hammers
- Dapping cutters
- Jewelers shears
- Beading pliers
- Burnishers
- Draw tongs
- Jeweler's saws
- Jewelers' loupes
- Flush cutters
- Split ring pliers
- Vibratory tumblers
- Wire twisting pliers
- Polishing wheels
- Flat horn anvils
- Mini band saws
- Rotary tumblers
- Stamping dies
- Gas torches
- Bur gauges
- Riveting hammers
- Straightedges
- Jewelry mandrels
- Head and shank tweezers
- Digital calipers
- Ring shank pliers
- Hand drills
- Jewelers' chain-nose pliers
- Binocular magnifiers
- Tracing punches
- Ring bending pliers
- Rolling mills
- Adjustable bench vises
- Parallel jaw pliers
- Microsoft Excel
- Adobe Systems Adobe Illustrator
- Microsoft Word
- Metal designing software
- Adobe Systems Adobe Photoshop
- Microsoft Outlook
- Web browser software