Will “Fiber Optic Technician” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Build, install, test, or maintain optical or fiber optic equipment, such as lasers, lenses, or mirrors, using spectrometers, interferometers, or related equipment.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3029.08
☝️ Information based on the reference occupation “Photonics Technicians”.
Also Known As…
- Photonics Technicians
- Ruling Technician
- Photonics Technician
- Photonic Laboratory Technician (Photonic Lab Tech)
- Optomechanical Technician
- Lead Technician
- Laser Technician
- Fiber Optics Technician
- Engineering Technologist
- Engineering Technician (Engineering Tech)
- Coating Manager
- Thin-film Technician
- Test Technician
- Strain Technician
- Service Technician
- Precision Optics Technician
- Photonics Engineering Technologist
- Photonics Engineering Technician
- Optoelectronic Technician
- Optics Test Technician
- Optics Manufacturing Technician
- Optical Manufacturing Technician
- Optical Fabrication Technician
- Optical Engineering Technician
- Laser/Electro-Optics Technician (LEOT)
- Laser Specialist
- Fiber Optics Supervisor
- Fiber Optic Assembler
Tasks for “Fiber Optic Technician”
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Monitor inventory levels and order supplies as necessary.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Maintain clean working environments, according to clean room standards.
- Assemble devices or equipment to be used in green technology applications, including solar energy, high efficiency solid state lighting, energy management, smart buildings, or green processes.
- Splice fibers, using fusion splicing or other techniques.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
- Perform laser seam welding, heat treatment, or hard facing operations.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Design, build, or modify fixtures used to assemble parts.
- Assist scientists or engineers in the conduct of photonic experiments.
- Compute or record photonic test data.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Monitor mechanical factors, such as turbine load or strain information.
- Repair or calibrate products, such as surgical lasers.
- Develop solar power sources for lasers used in fiber optics.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Optimize photonic process parameters by making prototype or production devices.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Fabricate sensors to be used to control wind turbines.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Lay out cutting lines for machining, using drafting tools.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Build photonics tools to be applied to electrical grids to detect hot spots, such as failing insulators or conductors.
Related Technology & Tools
- Digital logic analyzers
- Micrometers
- Monochromators
- Fire extinguishers
- Laser welders
- Laser drills
- Laser marking machines
- Humidity chambers
- Solid state lasers
- Micropositioners
- Optical alignment scopes
- Optical comparators
- Spectrometers
- Liquid dye lasers
- Dataloggers
- Safety glasses
- Wafer bonding systems
- Plasma strippers
- Bit error rate testers BERT
- Rapid thermal annealers RTA
- Cutoff saws
- Laboratory forceps
- Semiconductor parameter analyzers
- Optical power meters
- Hardness testers
- Reflow ovens
- Depth gauges
- Protective gloves
- Fiber cleavers
- Ion lasers
- Temperature chambers
- Wire pull testers
- Oscilloscopes
- Fiber polishers
- Mechanical steppers
- Atomic force microscopes AFM
- Phase-shifting interferometers
- Spectrophotometers
- Wire saws
- Autocollimators
- Logic pulsers
- Magnifiers
- Sputter deposition systems
- Calipers
- Vacuum deposition systems
- Abrasive grinding machines
- Die shears
- Computerized numerical control CNC band saws
- Photoelectric power meters
- Digital logic probes
- Laser cutting machines
- Protective gowns
- Analog oscilloscopes
- Chemical protective face shields
- Hand calculators
- Computerized numerical control CNC lathes
- Soldering irons
- Mach-Zehnder interferometers
- Optical mounts
- Biosafety cabinets
- Non contact profilometers
- Ellipsometers
- Electron cyclotron resonance ECR reactive ion etchers RIE
- Binocular light compound microscopes
- Computerized numerical control CNC machining centers
- Excimer lasers
- Lab jacks
- Wire bonders
- Gas lasers
- Scanning electron microscopes SEM
- Electron beam evaporators
- Collimators
- Isolators
- Semiconductor detectors
- Fabry-Perot interferometers
- Diffractometers
- Laser heat treatment equipment
- Die bonders
- Shearing interferometers
- Bench refractometers
- Fiber optic fault locators
- Vernier micrometers
- Digital oscilloscopes
- Twyman-Green interferometers
- Optical spectrum analyzers
- Chemical vapor deposition CVD systems
- Diode lasers
- Coordinate measuring machines CMM
- Common path interferometers
- Michelson interferometers
- Signal generators
- Optical rails
- Multifunction digital multimeters
- Positioning stages
- Wavelength meters
- Spherometers
- Fusion splicers
- Loupes
- Die saws
- Contact profilometers
- Computerized numerical control CNC drill presses
- Personal computers
- Microsoft Excel
- Web browser software
- Microsoft Office
- SAP
- Data acquisition software
- Image processing software
- Statistical analysis software
- Computer aided manufacturing CAM software
- ZEMAX Optical Design Program
- Word processing software
- The MathWorks MATLAB
- Presentation software
- Computer aided design CAD software
- Database software