Will “Photonics Engineering Technologist” be Replaced By Robots? 🤔
Unknown Chance of Automation
Sadly, the research paper did not provide any information about this occupation. Maybe have a look at our directory?
Job Description
Build, install, test, or maintain optical or fiber optic equipment, such as lasers, lenses, or mirrors, using spectrometers, interferometers, or related equipment.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3029.08
☝️ Information based on the reference occupation “Photonics Technicians”.
Also Known As…
- Photonics Technicians
- Ruling Technician
- Photonics Technician
- Photonic Laboratory Technician (Photonic Lab Tech)
- Optomechanical Technician
- Lead Technician
- Laser Technician
- Fiber Optics Technician
- Engineering Technologist
- Engineering Technician (Engineering Tech)
- Coating Manager
- Thin-film Technician
- Test Technician
- Strain Technician
- Service Technician
- Precision Optics Technician
- Photonics Engineering Technician
- Optoelectronic Technician
- Optics Test Technician
- Optics Manufacturing Technician
- Optical Manufacturing Technician
- Optical Fabrication Technician
- Optical Engineering Technician
- Laser/Electro-Optics Technician (LEOT)
- Laser Specialist
- Fiber Optics Supervisor
- Fiber Optic Technician
- Fiber Optic Assembler
Tasks for “Photonics Engineering Technologist”
- Perform laser seam welding, heat treatment, or hard facing operations.
- Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans.
- Repair or calibrate products, such as surgical lasers.
- Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers.
- Fabricate sensors to be used to control wind turbines.
- Compute or record photonic test data.
- Monitor mechanical factors, such as turbine load or strain information.
- Assemble devices or equipment to be used in green technology applications, including solar energy, high efficiency solid state lighting, energy management, smart buildings, or green processes.
- Design, build, or modify fixtures used to assemble parts.
- Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes.
- Monitor inventory levels and order supplies as necessary.
- Build photonics tools to be applied to electrical grids to detect hot spots, such as failing insulators or conductors.
- Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces.
- Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures.
- Optimize photonic process parameters by making prototype or production devices.
- Assist engineers in the development of new products, fixtures, tools, or processes.
- Maintain clean working environments, according to clean room standards.
- Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies.
- Develop solar power sources for lasers used in fiber optics.
- Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables.
- Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices.
- Lay out cutting lines for machining, using drafting tools.
- Assemble or adjust parts or related electrical units of prototypes to prepare for testing.
- Splice fibers, using fusion splicing or other techniques.
- Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices.
- Fabricate devices, such as optoelectronic or semiconductor devices.
- Terminate, cure, polish, or test fiber cables with mechanical connectors.
- Document procedures, such as calibration of optical or fiber optic equipment.
- Assist scientists or engineers in the conduct of photonic experiments.
- Recommend optical or optic equipment design or material changes to reduce costs or processing times.
Related Technology & Tools
- Scanning electron microscopes SEM
- Calipers
- Liquid dye lasers
- Optical rails
- Photoelectric power meters
- Isolators
- Computerized numerical control CNC drill presses
- Michelson interferometers
- Phase-shifting interferometers
- Safety glasses
- Optical alignment scopes
- Chemical protective face shields
- Optical comparators
- Optical power meters
- Wire pull testers
- Laser marking machines
- Contact profilometers
- Monochromators
- Humidity chambers
- Gas lasers
- Micrometers
- Diode lasers
- Depth gauges
- Vernier micrometers
- Hand calculators
- Fire extinguishers
- Shearing interferometers
- Die shears
- Spectrophotometers
- Magnifiers
- Optical mounts
- Logic pulsers
- Digital oscilloscopes
- Soldering irons
- Signal generators
- Fiber polishers
- Cutoff saws
- Computerized numerical control CNC band saws
- Lab jacks
- Laboratory forceps
- Electron beam evaporators
- Hardness testers
- Twyman-Green interferometers
- Personal computers
- Sputter deposition systems
- Semiconductor detectors
- Binocular light compound microscopes
- Common path interferometers
- Optical spectrum analyzers
- Bench refractometers
- Wire bonders
- Oscilloscopes
- Computerized numerical control CNC lathes
- Abrasive grinding machines
- Rapid thermal annealers RTA
- Wire saws
- Fabry-Perot interferometers
- Multifunction digital multimeters
- Temperature chambers
- Positioning stages
- Reflow ovens
- Chemical vapor deposition CVD systems
- Digital logic probes
- Dataloggers
- Bit error rate testers BERT
- Mechanical steppers
- Semiconductor parameter analyzers
- Laser drills
- Diffractometers
- Ion lasers
- Computerized numerical control CNC machining centers
- Ellipsometers
- Die saws
- Laser welders
- Atomic force microscopes AFM
- Fusion splicers
- Wafer bonding systems
- Loupes
- Wavelength meters
- Digital logic analyzers
- Spectrometers
- Fiber cleavers
- Laser cutting machines
- Vacuum deposition systems
- Protective gloves
- Autocollimators
- Solid state lasers
- Micropositioners
- Die bonders
- Analog oscilloscopes
- Biosafety cabinets
- Non contact profilometers
- Excimer lasers
- Coordinate measuring machines CMM
- Fiber optic fault locators
- Mach-Zehnder interferometers
- Electron cyclotron resonance ECR reactive ion etchers RIE
- Protective gowns
- Spherometers
- Collimators
- Plasma strippers
- Laser heat treatment equipment
- The MathWorks MATLAB
- Database software
- Microsoft Excel
- Statistical analysis software
- Computer aided design CAD software
- Computer aided manufacturing CAM software
- Data acquisition software
- ZEMAX Optical Design Program
- Web browser software
- Presentation software
- Word processing software
- Microsoft Office
- SAP
- Image processing software