Will “Applicator” be Replaced By Robots? 🤔
84% Chance of Automation
“Applicator” will probably be replaced by robots.
This job is ranked #475 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply interior or exterior plaster, cement, stucco, or similar materials. May also set ornamental plaster.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2161.00
- The Mean Annual Wage in the U.S. is $ 44,070.00
- The Mean Hourly Wage is $ 21.00
- Currently, there are 22,810 people on this job
☝️ Information based on the reference occupation “Plasterers and Stucco Masons”.
Also Known As…
- Plasterers and Stucco Masons
- Plastering Contractor
- Plasterer Journeyman
- Plasterer Foreman
- Plasterer
- Plaster Mechanic
- Plaster Foreman
- Plaster Applicator
- Plaster and Stucco Worker
- Artisan Plasterer
- Applicator
- Synthetic Plasterer
- Stucco Worker
- Stucco Plasterer
- Stucco Applicator
- Poured Wall Foreman
- Plasterer Apprentice
- Plaster Molder
- Molding Plasterer
- Modeler
- Mason
- Dry Plasterer
- Artisan
Tasks for “Applicator”
- Apply coats of plaster or stucco to walls, ceilings, or partitions of buildings, using trowels, brushes, or spray guns.
- Install guide wires on exterior surfaces of buildings to indicate thickness of plaster or stucco and nail wire mesh, lath, or similar materials to the outside surface to hold stucco in place.
- Rough the undercoat surface with a scratcher so the finish coat will adhere.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Cure freshly plastered surfaces.
- Mix mortar and plaster to desired consistency or direct workers who perform mixing.
- Cover surfaces such as windows, doors, or sidewalks to protect from splashing.
- Set up scaffolds.
- Clean job sites.
- Apply weatherproof, decorative coverings to exterior surfaces of buildings, such as by troweling or spraying on coats of stucco.
- Mold or install ornamental plaster pieces, panels, or trim.
- Create decorative textures in finish coat, using brushes or trowels, sand, pebbles, or stones.
- Determine materials needed to complete the job and place orders accordingly.
- Spray acoustic materials or texture finish over walls or ceilings.
- Apply insulation to building exteriors by installing prefabricated insulation systems over existing walls or by covering the outer wall with insulation board, reinforcing mesh, and a base coat.
Related Technology & Tools
- Hand saws
- Piston pumps
- Plaster molds
- Lime brushes
- Darbies
- Stilts
- Claw hammers
- Spray guns
- Personal computers
- Power drills
- Plaster spraying machines
- Rulers
- Chalk lines
- Keyhole saws
- Precision levels
- Nose step tools
- Plasterers' hammers
- Straightedges
- Hand trowels
- Floats
- Ladders
- Trimming knives
- Heat guns
- Power sanders
- Ornamental cut and shape tools
- Notebook computers
- Power trowels
- Screeds
- Plumb bobs
- Corner tools
- Plaster mixers
- Joint knives
- Scraping tools
- Inside step tools
- T-squares
- Utility knives
- Scratcher trowels
- Featheredgers
- Outside step tools
- Nail guns
- Scaffolding
- Cost estimating software
- Turtle Creek Software Goldenseal
- Sage Construction Anywhere
- Construction Software Center EasyEst
- A-Systems JobView