Will “Plaster and Stucco Worker” be Replaced By Robots? 🤔
84% Chance of Automation
“Plaster and Stucco Worker” will probably be replaced by robots.
This job is ranked #475 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply interior or exterior plaster, cement, stucco, or similar materials. May also set ornamental plaster.
Job Details
- The SOC (Standard Occupational Classification) code is 47-2161.00
- The Mean Annual Wage in the U.S. is $ 44,070.00
- The Mean Hourly Wage is $ 21.00
- Currently, there are 22,810 people on this job
☝️ Information based on the reference occupation “Plasterers and Stucco Masons”.
Also Known As…
- Plasterers and Stucco Masons
- Plastering Contractor
- Plasterer Journeyman
- Plasterer Foreman
- Plasterer
- Plaster Mechanic
- Plaster Foreman
- Plaster Applicator
- Plaster and Stucco Worker
- Artisan Plasterer
- Applicator
- Synthetic Plasterer
- Stucco Worker
- Stucco Plasterer
- Stucco Applicator
- Poured Wall Foreman
- Plasterer Apprentice
- Plaster Molder
- Molding Plasterer
- Modeler
- Mason
- Dry Plasterer
- Artisan
Tasks for “Plaster and Stucco Worker”
- Create decorative textures in finish coat, using brushes or trowels, sand, pebbles, or stones.
- Install guide wires on exterior surfaces of buildings to indicate thickness of plaster or stucco and nail wire mesh, lath, or similar materials to the outside surface to hold stucco in place.
- Determine materials needed to complete the job and place orders accordingly.
- Cover surfaces such as windows, doors, or sidewalks to protect from splashing.
- Cure freshly plastered surfaces.
- Set up scaffolds.
- Mold or install ornamental plaster pieces, panels, or trim.
- Apply weatherproof, decorative coverings to exterior surfaces of buildings, such as by troweling or spraying on coats of stucco.
- Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
- Rough the undercoat surface with a scratcher so the finish coat will adhere.
- Clean job sites.
- Apply coats of plaster or stucco to walls, ceilings, or partitions of buildings, using trowels, brushes, or spray guns.
- Mix mortar and plaster to desired consistency or direct workers who perform mixing.
- Apply insulation to building exteriors by installing prefabricated insulation systems over existing walls or by covering the outer wall with insulation board, reinforcing mesh, and a base coat.
- Spray acoustic materials or texture finish over walls or ceilings.
Related Technology & Tools
- Plaster mixers
- Piston pumps
- Utility knives
- Ladders
- Inside step tools
- Straightedges
- Corner tools
- Plasterers' hammers
- Floats
- Precision levels
- Joint knives
- Heat guns
- Power sanders
- Plaster spraying machines
- Nail guns
- Hand saws
- Ornamental cut and shape tools
- Spray guns
- Hand trowels
- Trimming knives
- Scraping tools
- T-squares
- Scratcher trowels
- Power drills
- Rulers
- Keyhole saws
- Power trowels
- Claw hammers
- Darbies
- Notebook computers
- Nose step tools
- Chalk lines
- Lime brushes
- Stilts
- Screeds
- Plumb bobs
- Plaster molds
- Featheredgers
- Outside step tools
- Scaffolding
- Personal computers
- Turtle Creek Software Goldenseal
- A-Systems JobView
- Cost estimating software
- Sage Construction Anywhere
- Construction Software Center EasyEst