Will “Interlocking Concrete Pavement Installer” be Replaced By Robots? 🤔
83% Chance of Automation
“Interlocking Concrete Pavement Installer” will probably be replaced by robots.
This job is ranked #464 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Lay out, cut, and place segmental paving units. Includes installers of bedding and restraining materials for the paving units.
Job Details
- The SOC (Standard Occupational Classification) code is 47-4091.00
- The Mean Annual Wage in the U.S. is $ 34,160.00
- The Mean Hourly Wage is $ 16.00
- Currently, there are 1,720 people on this job
☝️ Information based on the reference occupation “Segmental Pavers”.
Also Known As…
- Segmental Pavers
- Segmental Wall Installer
- Paving Stone Installer
- Paver Layer
- Paver Installer
- Paver
- Cutter
- Travertine Installer
- Slab Installer
- Segmental Paver Installer
- Paving Foreman
- Landscape Foreman
- Interlocking Pavement Installer
- Interlocking Installer
- Installer
- Concrete Paver
- Concrete Pavement Installer
- Bricklayer
Tasks for “Interlocking Concrete Pavement Installer”
- Cut paving stones to size and for edges, using a splitter and a masonry saw.
- Resurface an outside area with cobblestones, terracotta tiles, concrete or other materials.
- Supply and place base materials, edge restraints, bedding sand and jointing sand.
- Set pavers, aligning and spacing them correctly.
- Cement the edges of the paved area.
- Sweep sand from the surface prior to opening to traffic.
- Screed sand level to an even thickness, and recheck sand exposed to elements, raking and rescreeding if necessary.
- Compact bedding sand and pavers to finish the paved area, using a plate compactor.
- Prepare base for installation by removing unstable or unsuitable materials, compacting and grading the soil, draining or stabilizing weak or saturated soils and taking measures to prevent water penetration and migration of bedding sand.
- Design paver installation layout pattern and create markings for directional references of joints and stringlines.
- Discuss the design with the client.
- Sweep sand into the joints and compact pavement until the joints are full.
Related Technology & Tools
- Slide hammers
- Vibratory plate compactors
- Chop saws
- Jackhammers
- Masonry saws
- Paving edgers
- Paver carts
- Chalk line markers
- Grout mixers
- Paver pullers
- Paver washers
- Leaf blowers
- Stone grinders
- Base rakes
- Rubber hammers
- Table saws
- Dust collectors
- Material hoists
- Pressure washers
- Paver layout squares
- Lifting spreaders
- Material moving cranes
- Fork-grapples
- Dump trucks
- Sand screeding equipment
- Power brooms
- Screed rails
- Backhoes
- Paver scribers
- Laser levels
- Vacuum lifters
- Demolition hammers
- Pallet wagons
- Slab lifters
- Hardscape mallets
- Forklifts
- Wheeled front end loaders
- Paver brooms
- Skid steer loaders
- Paver block splitters
- Paver adjusters
- Mini excavators
- Paver extractors
- Chainsaws
- Bandcutters
- Depiction Software Deco-Con
- Decorative Software Online Visualizers
- Web browser software
- UNI-GROUP Lockpave Pro
- Depiction Software Hardscape Imaging
- Depiction Software Deco-Con Estimating