Will “Cutter” be Replaced By Robots? 🤔

83% Chance of Automation

“Cutter” will probably be replaced by robots.

This job is ranked #464 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Lay out, cut, and place segmental paving units. Includes installers of bedding and restraining materials for the paving units.

☝️ Information based on the reference occupation “Segmental Pavers”.

Discuss the design with the client.
Resurface an outside area with cobblestones, terracotta tiles, concrete or other materials.
Screed sand level to an even thickness, and recheck sand exposed to elements, raking and rescreeding if necessary.
Design paver installation layout pattern and create markings for directional references of joints and stringlines.
Cut paving stones to size and for edges, using a splitter and a masonry saw.
Cement the edges of the paved area.
Compact bedding sand and pavers to finish the paved area, using a plate compactor.
Prepare base for installation by removing unstable or unsuitable materials, compacting and grading the soil, draining or stabilizing weak or saturated soils and taking measures to prevent water penetration and migration of bedding sand.
Supply and place base materials, edge restraints, bedding sand and jointing sand.
Sweep sand from the surface prior to opening to traffic.
Set pavers, aligning and spacing them correctly.
Sweep sand into the joints and compact pavement until the joints are full.