Will “Segmental Pavers” be Replaced By Robots? 🤔

83% Chance of Automation

“Segmental Pavers” will probably be replaced by robots.

This job is ranked #464 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Lay out, cut, and place segmental paving units. Includes installers of bedding and restraining materials for the paving units.

Screed sand level to an even thickness, and recheck sand exposed to elements, raking and rescreeding if necessary.
Cement the edges of the paved area.
Sweep sand into the joints and compact pavement until the joints are full.
Prepare base for installation by removing unstable or unsuitable materials, compacting and grading the soil, draining or stabilizing weak or saturated soils and taking measures to prevent water penetration and migration of bedding sand.
Resurface an outside area with cobblestones, terracotta tiles, concrete or other materials.
Supply and place base materials, edge restraints, bedding sand and jointing sand.
Cut paving stones to size and for edges, using a splitter and a masonry saw.
Sweep sand from the surface prior to opening to traffic.
Discuss the design with the client.
Set pavers, aligning and spacing them correctly.
Compact bedding sand and pavers to finish the paved area, using a plate compactor.
Design paver installation layout pattern and create markings for directional references of joints and stringlines.