-
Read production schedules to determine setups of equipment and machines.
-
Remove excess materials or impurities from objects, using air hoses or grinding machines.
-
Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
-
Operate hoists to place workpieces onto machine feed carriages or spindles.
-
Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
-
Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
-
Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
-
Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
-
Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
-
Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
-
Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
-
Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
-
Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
-
Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
-
Operate sandblasting equipment to roughen and clean surfaces of workpieces.
-
Clean and maintain equipment, using water hoses and scrapers.
-
Mix and test solutions, and turn valves to fill tanks with solutions.
-
Position and feed materials into processing machines, by hand or by using automated equipment.
-
Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
-
Measure or weigh materials, using rulers, calculators, and scales.
-
Replace worn parts and adjust equipment components, using hand tools.
-
Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
-
Maintain production records.
-
Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
-
Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
-
Measure, mark, and mask areas to be excluded from plating.
-
Preheat workpieces in ovens.
-
Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
-
Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
-
Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
-
Clean workpieces, using wire brushes.
-
Test machinery to ensure that it is operating properly.
-
Immerse workpieces in coating solutions or liquid metal or plastic for specified times.