Will “Auto Machinist” be Replaced By Robots? 🤔
65% Chance of Automation
“Auto Machinist” will maybe be replaced by robots.
This job is ranked #358 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.
Job Details
- The SOC (Standard Occupational Classification) code is 51-4041.00
- The Mean Annual Wage in the U.S. is $ 43,220.00
- The Mean Hourly Wage is $ 20.00
- Currently, there are 391,120 people on this job
☝️ Information based on the reference occupation “Machinists”.
Also Known As…
- Machinists
- Tool Room Machinist
- Set-Up Machinist
- Production Machinist
- Maintenance Specialist
- Maintenance Machinist
- Machinist
- Machine Repair Person
- Machine Operator
- Journeyman Machinist
- Gear Machinist
- Wind Turbine Machinist
- Utility Operator
- Turret Lathe Machinist
- Trouble Shooter
- Toolroom Machinist
- Tool Machinist
- Tool and Die Machinist
- Thermometer Maker
- Test Technician
- Set-Up Operator
- Senior Maintenance Machinist
- Secondary Set-Up Man
- Rocket Motor Mechanic
- Printing Press Machinist
- Precision Machinist
- Precision Machine Operator
- Precision Instrument Maker
- Outside Machinist Apprentice
- Outside Machinist
- NC Machinist
- Metal Machinist
- Mechanist
- Mechanical Laboratory Technician
- Master Machinist
- Manual Machinist
- Manual Lathe Machinist
- Machinist/Machine Builder
- Machinist-Set-Up
- Machinist Tool and Die
- Machinist Mate
- Machinist Class B
- Machinist Apprentice
- Machinist A
- Machine Setup Operator
- Machine Setter
- Machine Set-Up
- Machine Fitter
- Lathe Machinist
- Laboratory Machinist
- Jobber
- Instrument Maker Apprentice
- Instrument Maker and Repairer
- Instrument Maker
- Hydroelectric Component Machinist
- Head Machinist
- Geothermal Heat Pump Machinist
- Four-Slide Operator
- Fluid-Power Mechanic
- Fixture Maker
- Fitter
- Experimental Mechanic
- Experimental Machinist
- Electrical Machinist
- Electrical Instrument Maker
- Electrical Experimental Mechanic
- Development Mechanic
- Deck Engineer
- Conventional Machinist
- CNC Machinist (Computer Numerically Controlled Machinist)
- Carbide Operator
- Bench Hand
- Automotive Machinist Apprentice
- Automotive Machinist
- Aircraft Machinist
Tasks for “Auto Machinist”
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Advise clients about the materials being used for finished products.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Monitor the feed and speed of machines during the machining process.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Test experimental models under simulated operating conditions for purposes such as development, standardization, or feasibility of design.
- Prepare working sketches for the illustration of product appearance.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Maintain machine tools in proper operational condition.
- Fit and assemble parts to make or repair machine tools.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Calculate dimensions or tolerances, using instruments such as micrometers or vernier calipers.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Install repaired parts into equipment or install new equipment.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Operate equipment to verify operational efficiency.
Related Technology & Tools
- Laser printers
- Micrometers
- Inside spring calipers
- Desktop computers
- Boring bars
- Drum lathes
- Binocular light compound microscopes
- Brass hammers
- Hand saws
- Vertical turret lathes VTL
- Cold saws
- Full face shields
- Sharpening equipment
- Hermaphrodite calipers
- Ratchet sets
- Composition hammers
- Knee mills
- Engine lathes
- Putty knives
- Punches
- Plasma welders
- Metal inert gas MIG welders
- Broachers
- Metal spray equipment
- Torches
- Brazing equipment
- V blocks
- Arbor presses
- Square chisels
- Sandblasters
- Tube benders
- Sledgehammers
- Vernier calipers
- Planer gauges
- Combination wrenches
- Inside micrometers
- Height gauges
- Center drills
- Gauges
- Horizontal boring bars
- Computerized numerical control CNC turning lathes
- Tungsten inert gas TIG welding equipment
- Combination drills
- Grinders
- Radius gauges
- Chippers
- Half-round files
- Planers
- Ball peen hammers
- Spirit levels
- Grinding wheel arbors
- Hydraulic presses
- Aviation snips
- Undercut tools
- Crankshaft grinders
- Horizontal mills
- Prick punches
- Radial drills
- Handheld welders
- Magnetic retrievers
- Oxyacetylene welding equipment
- Milling angle form cutters
- Parallel blocks
- Beverly shears
- Boring tools
- Cold chisels
- Centrifugal spin casters
- Personal digital assistants PDA
- Dial calipers
- Soldering equipment
- Horizontal lathes
- Vernier height gauges
- Feeler gauges
- Milling machines
- Channel lock pliers
- Hex wrenches
- Workshop cranes
- Adjustable wrenches
- Calipers
- Chucks
- Wedges
- Computerized numerical control CNC machining centers
- Flat files
- Screw pitch gauges
- Steel rules
- Milling vises
- Resurfacing machines
- Welding lenses
- Heat-treating equipment
- Pillar drill machines
- Cylinder honers
- Cutoff saws
- Phillips head screwdrivers
- Power drills
- Outside micrometers
- Hex keys
- Portable welding equipment
- Grinding dogs
- Pipe threaders
- Hacksaws
- Brake presses
- Staging equipment
- Needlenose pliers
- Ring gauges
- Turret lathes
- Platforms
- Ladders
- Vernier gear tooth calipers
- Surface grinding machines
- Cylindrical grinders
- Angled feeler gauges
- Hand clamps
- Shims
- Telescoping gauges
- Sine bars
- 3-axis computerized numerical control CNC machines
- Shears
- Angle plates
- Thread gauges
- Reamers
- Marking blocks
- Valve grinding machines
- Sensitive drill presses
- Outside spring calipers
- Pipe wrenches
- Multi-axis computerized numerical control CNC machines
- Shapers
- Edge finders
- Radial drill presses
- Spindle blade screwdrivers
- Metal cutting taps
- Welding shields
- Single-cut mill saw files
- Machinists' hammers
- Power hacksaws
- Utility knives
- Breaker lathes
- Lathes
- Deburring tools
- Threading machines
- Anvils
- Vernier bevel protractors
- Metal shears
- Power sanders
- Jointers
- Rubber mallets
- Dial indicators
- Buffers
- Side cutting pliers
- Machine shop rigging equipment
- Steel wedges
- Chamfer tools
- Flywheel lathes
- Personal computers
- Combination pliers
- Shielded arc welding tools
- Bandsaws
- Pry bars
- Machinists' squares
- Scribers
- Vertical milling machines
- Turning lathes
- Screwdrivers
- Forklifts
- Swaging tools
- Tongs
- Socket wrench sets
- Surface gauges
- Microsoft Word
- JETCAM
- CNC Mastercam
- EditCNC
- Computer aided design CAD software
- Autodesk AutoCAD
- Microsoft Office
- CCG Systems FASTER
- ERP software
- Microsoft Excel
- Armchair Machinist software
- Kentech Trig Kalculator
- Kentech Kipware Studio
- Microsoft Outlook
- CNC Consulting Machinists' Calculator
- CNC TurboCAD/CAM
- Computer aided manufacturing CAM software