Will “Machinist Tool and Die” be Replaced By Robots? 🤔
65% Chance of Automation
“Machinist Tool and Die” will maybe be replaced by robots.
This job is ranked #358 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.
Job Details
- The SOC (Standard Occupational Classification) code is 51-4041.00
- The Mean Annual Wage in the U.S. is $ 43,220.00
- The Mean Hourly Wage is $ 20.00
- Currently, there are 391,120 people on this job
☝️ Information based on the reference occupation “Machinists”.
Also Known As…
- Machinists
- Tool Room Machinist
- Set-Up Machinist
- Production Machinist
- Maintenance Specialist
- Maintenance Machinist
- Machinist
- Machine Repair Person
- Machine Operator
- Journeyman Machinist
- Gear Machinist
- Wind Turbine Machinist
- Utility Operator
- Turret Lathe Machinist
- Trouble Shooter
- Toolroom Machinist
- Tool Machinist
- Tool and Die Machinist
- Thermometer Maker
- Test Technician
- Set-Up Operator
- Senior Maintenance Machinist
- Secondary Set-Up Man
- Rocket Motor Mechanic
- Printing Press Machinist
- Precision Machinist
- Precision Machine Operator
- Precision Instrument Maker
- Outside Machinist Apprentice
- Outside Machinist
- NC Machinist
- Metal Machinist
- Mechanist
- Mechanical Laboratory Technician
- Master Machinist
- Manual Machinist
- Manual Lathe Machinist
- Machinist/Machine Builder
- Machinist-Set-Up
- Machinist Mate
- Machinist Class B
- Machinist Apprentice
- Machinist A
- Machine Setup Operator
- Machine Setter
- Machine Set-Up
- Machine Fitter
- Lathe Machinist
- Laboratory Machinist
- Jobber
- Instrument Maker Apprentice
- Instrument Maker and Repairer
- Instrument Maker
- Hydroelectric Component Machinist
- Head Machinist
- Geothermal Heat Pump Machinist
- Four-Slide Operator
- Fluid-Power Mechanic
- Fixture Maker
- Fitter
- Experimental Mechanic
- Experimental Machinist
- Electrical Machinist
- Electrical Instrument Maker
- Electrical Experimental Mechanic
- Development Mechanic
- Deck Engineer
- Conventional Machinist
- CNC Machinist (Computer Numerically Controlled Machinist)
- Carbide Operator
- Bench Hand
- Automotive Machinist Apprentice
- Automotive Machinist
- Auto Machinist
- Aircraft Machinist
Tasks for “Machinist Tool and Die”
- Fit and assemble parts to make or repair machine tools.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Test experimental models under simulated operating conditions for purposes such as development, standardization, or feasibility of design.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Monitor the feed and speed of machines during the machining process.
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Maintain machine tools in proper operational condition.
- Prepare working sketches for the illustration of product appearance.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Advise clients about the materials being used for finished products.
- Operate equipment to verify operational efficiency.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Install repaired parts into equipment or install new equipment.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Calculate dimensions or tolerances, using instruments such as micrometers or vernier calipers.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.
Related Technology & Tools
- Horizontal lathes
- Needlenose pliers
- Horizontal boring bars
- Angle plates
- Turret lathes
- Cold chisels
- Computerized numerical control CNC machining centers
- Channel lock pliers
- Computerized numerical control CNC turning lathes
- Putty knives
- Outside micrometers
- Engine lathes
- Boring bars
- Oxyacetylene welding equipment
- Portable welding equipment
- Surface grinding machines
- Sandblasters
- Vernier height gauges
- Crankshaft grinders
- Flat files
- Spindle blade screwdrivers
- Threading machines
- Center drills
- Power hacksaws
- Binocular light compound microscopes
- Socket wrench sets
- Radial drill presses
- Pipe threaders
- Planer gauges
- Hand clamps
- Vertical turret lathes VTL
- Shears
- Centrifugal spin casters
- Dial indicators
- Pry bars
- Screwdrivers
- Jointers
- Prick punches
- Staging equipment
- Dial calipers
- Sine bars
- Full face shields
- Cylinder honers
- Drum lathes
- Adjustable wrenches
- Parallel blocks
- Rubber mallets
- Screw pitch gauges
- Pillar drill machines
- Buffers
- Chamfer tools
- Personal digital assistants PDA
- Micrometers
- Planers
- Outside spring calipers
- Boring tools
- Machine shop rigging equipment
- Milling machines
- Ring gauges
- Metal spray equipment
- Valve grinding machines
- Vertical milling machines
- Tongs
- Milling angle form cutters
- Ratchet sets
- Bandsaws
- Personal computers
- Machinists' squares
- Welding lenses
- Steel rules
- Metal cutting taps
- Hex wrenches
- Brass hammers
- Anvils
- Sensitive drill presses
- Cylindrical grinders
- Turning lathes
- Chucks
- Plasma welders
- Cold saws
- V blocks
- Side cutting pliers
- Welding shields
- Utility knives
- Hex keys
- Aviation snips
- Vernier calipers
- Phillips head screwdrivers
- Sledgehammers
- Heat-treating equipment
- Laser printers
- Inside micrometers
- Ladders
- Deburring tools
- Flywheel lathes
- Multi-axis computerized numerical control CNC machines
- Metal inert gas MIG welders
- Swaging tools
- Cutoff saws
- Reamers
- Hacksaws
- Edge finders
- Single-cut mill saw files
- Gauges
- Calipers
- Marking blocks
- Shapers
- Torches
- Surface gauges
- Steel wedges
- Square chisels
- Shielded arc welding tools
- Spirit levels
- Hydraulic presses
- Machinists' hammers
- Knee mills
- Handheld welders
- Magnetic retrievers
- Forklifts
- Power sanders
- Undercut tools
- Broachers
- Power drills
- Tungsten inert gas TIG welding equipment
- Workshop cranes
- Grinding wheel arbors
- Vernier gear tooth calipers
- Tube benders
- Angled feeler gauges
- Brazing equipment
- Beverly shears
- Breaker lathes
- Height gauges
- Horizontal mills
- Metal shears
- Combination wrenches
- Inside spring calipers
- Hand saws
- Punches
- Desktop computers
- Scribers
- Sharpening equipment
- Pipe wrenches
- Resurfacing machines
- Radius gauges
- Half-round files
- Brake presses
- 3-axis computerized numerical control CNC machines
- Platforms
- Grinding dogs
- Vernier bevel protractors
- Ball peen hammers
- Combination pliers
- Combination drills
- Composition hammers
- Arbor presses
- Shims
- Wedges
- Radial drills
- Lathes
- Milling vises
- Telescoping gauges
- Feeler gauges
- Thread gauges
- Grinders
- Chippers
- Hermaphrodite calipers
- Soldering equipment
- Computer aided manufacturing CAM software
- EditCNC
- Computer aided design CAD software
- Microsoft Excel
- Microsoft Word
- Microsoft Outlook
- ERP software
- JETCAM
- CCG Systems FASTER
- CNC Consulting Machinists' Calculator
- Armchair Machinist software
- CNC TurboCAD/CAM
- Autodesk AutoCAD
- Kentech Kipware Studio
- Kentech Trig Kalculator
- Microsoft Office
- CNC Mastercam