Will “Tool and Die Machinist” be Replaced By Robots? 🤔
65% Chance of Automation
“Tool and Die Machinist” will maybe be replaced by robots.
This job is ranked #358 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures.
Job Details
- The SOC (Standard Occupational Classification) code is 51-4041.00
- The Mean Annual Wage in the U.S. is $ 43,220.00
- The Mean Hourly Wage is $ 20.00
- Currently, there are 391,120 people on this job
☝️ Information based on the reference occupation “Machinists”.
Also Known As…
- Machinists
- Tool Room Machinist
- Set-Up Machinist
- Production Machinist
- Maintenance Specialist
- Maintenance Machinist
- Machinist
- Machine Repair Person
- Machine Operator
- Journeyman Machinist
- Gear Machinist
- Wind Turbine Machinist
- Utility Operator
- Turret Lathe Machinist
- Trouble Shooter
- Toolroom Machinist
- Tool Machinist
- Thermometer Maker
- Test Technician
- Set-Up Operator
- Senior Maintenance Machinist
- Secondary Set-Up Man
- Rocket Motor Mechanic
- Printing Press Machinist
- Precision Machinist
- Precision Machine Operator
- Precision Instrument Maker
- Outside Machinist Apprentice
- Outside Machinist
- NC Machinist
- Metal Machinist
- Mechanist
- Mechanical Laboratory Technician
- Master Machinist
- Manual Machinist
- Manual Lathe Machinist
- Machinist/Machine Builder
- Machinist-Set-Up
- Machinist Tool and Die
- Machinist Mate
- Machinist Class B
- Machinist Apprentice
- Machinist A
- Machine Setup Operator
- Machine Setter
- Machine Set-Up
- Machine Fitter
- Lathe Machinist
- Laboratory Machinist
- Jobber
- Instrument Maker Apprentice
- Instrument Maker and Repairer
- Instrument Maker
- Hydroelectric Component Machinist
- Head Machinist
- Geothermal Heat Pump Machinist
- Four-Slide Operator
- Fluid-Power Mechanic
- Fixture Maker
- Fitter
- Experimental Mechanic
- Experimental Machinist
- Electrical Machinist
- Electrical Instrument Maker
- Electrical Experimental Mechanic
- Development Mechanic
- Deck Engineer
- Conventional Machinist
- CNC Machinist (Computer Numerically Controlled Machinist)
- Carbide Operator
- Bench Hand
- Automotive Machinist Apprentice
- Automotive Machinist
- Auto Machinist
- Aircraft Machinist
Tasks for “Tool and Die Machinist”
- Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
- Separate scrap waste and related materials for reuse, recycling, or disposal.
- Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products.
- Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed.
- Diagnose machine tool malfunctions to determine need for adjustments or repairs.
- Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment.
- Lay out, measure, and mark metal stock to display placement of cuts.
- Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations.
- Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.
- Establish work procedures for fabricating new structural products, using a variety of metalworking machines.
- Confer with engineering, supervisory, or manufacturing personnel to exchange technical information.
- Monitor the feed and speed of machines during the machining process.
- Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms.
- Maintain machine tools in proper operational condition.
- Test experimental models under simulated operating conditions for purposes such as development, standardization, or feasibility of design.
- Prepare working sketches for the illustration of product appearance.
- Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability.
- Check work pieces to ensure that they are properly lubricated or cooled.
- Dispose of scrap or waste material in accordance with company policies and environmental regulations.
- Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications.
- Fit and assemble parts to make or repair machine tools.
- Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Calculate dimensions or tolerances, using instruments such as micrometers or vernier calipers.
- Program computers or electronic instruments, such as numerically controlled machine tools.
- Advise clients about the materials being used for finished products.
- Install repaired parts into equipment or install new equipment.
- Design fixtures, tooling, or experimental parts to meet special engineering needs.
- Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
- Operate equipment to verify operational efficiency.
Related Technology & Tools
- Marking blocks
- Cylinder honers
- Cylindrical grinders
- Center drills
- Jointers
- Personal computers
- Sensitive drill presses
- Needlenose pliers
- Shears
- Planer gauges
- Tongs
- Oxyacetylene welding equipment
- Punches
- Magnetic retrievers
- Dial calipers
- V blocks
- Computerized numerical control CNC turning lathes
- Ring gauges
- Vertical turret lathes VTL
- Heat-treating equipment
- Grinders
- Putty knives
- Square chisels
- Full face shields
- Welding lenses
- Chippers
- Centrifugal spin casters
- Single-cut mill saw files
- Pry bars
- Sandblasters
- Socket wrench sets
- Thread gauges
- Combination wrenches
- Hand saws
- Screw pitch gauges
- Outside micrometers
- Steel rules
- Wedges
- 3-axis computerized numerical control CNC machines
- Threading machines
- Micrometers
- Radius gauges
- Pipe wrenches
- Laser printers
- Brazing equipment
- Hacksaws
- Tungsten inert gas TIG welding equipment
- Computerized numerical control CNC machining centers
- Side cutting pliers
- Shapers
- Crankshaft grinders
- Adjustable wrenches
- Rubber mallets
- Beverly shears
- Height gauges
- Hex keys
- Milling machines
- Inside spring calipers
- Calipers
- Workshop cranes
- Desktop computers
- Cold chisels
- Broachers
- Ratchet sets
- Sine bars
- Machinists' squares
- Angled feeler gauges
- Soldering equipment
- Combination drills
- Radial drill presses
- Phillips head screwdrivers
- Edge finders
- Ladders
- Vernier height gauges
- Inside micrometers
- Ball peen hammers
- Cold saws
- Lathes
- Machinists' hammers
- Power sanders
- Surface grinding machines
- Grinding dogs
- Welding shields
- Horizontal lathes
- Flywheel lathes
- Platforms
- Steel wedges
- Machine shop rigging equipment
- Composition hammers
- Angle plates
- Radial drills
- Combination pliers
- Spirit levels
- Boring tools
- Utility knives
- Portable welding equipment
- Deburring tools
- Flat files
- Reamers
- Aviation snips
- Tube benders
- Pipe threaders
- Horizontal boring bars
- Chucks
- Sharpening equipment
- Shielded arc welding tools
- Anvils
- Personal digital assistants PDA
- Power drills
- Knee mills
- Metal inert gas MIG welders
- Buffers
- Sledgehammers
- Metal spray equipment
- Vernier bevel protractors
- Plasma welders
- Boring bars
- Brass hammers
- Resurfacing machines
- Vernier calipers
- Power hacksaws
- Telescoping gauges
- Cutoff saws
- Screwdrivers
- Undercut tools
- Gauges
- Hydraulic presses
- Breaker lathes
- Multi-axis computerized numerical control CNC machines
- Dial indicators
- Grinding wheel arbors
- Pillar drill machines
- Engine lathes
- Scribers
- Turning lathes
- Planers
- Valve grinding machines
- Channel lock pliers
- Staging equipment
- Hermaphrodite calipers
- Turret lathes
- Shims
- Vertical milling machines
- Metal cutting taps
- Surface gauges
- Arbor presses
- Vernier gear tooth calipers
- Drum lathes
- Parallel blocks
- Prick punches
- Brake presses
- Swaging tools
- Forklifts
- Metal shears
- Bandsaws
- Chamfer tools
- Feeler gauges
- Half-round files
- Milling vises
- Spindle blade screwdrivers
- Horizontal mills
- Hex wrenches
- Outside spring calipers
- Hand clamps
- Torches
- Handheld welders
- Binocular light compound microscopes
- Milling angle form cutters
- Kentech Trig Kalculator
- Armchair Machinist software
- Kentech Kipware Studio
- JETCAM
- ERP software
- CNC Mastercam
- CCG Systems FASTER
- Microsoft Word
- Computer aided design CAD software
- Computer aided manufacturing CAM software
- EditCNC
- CNC Consulting Machinists' Calculator
- Microsoft Office
- CNC TurboCAD/CAM
- Microsoft Excel
- Microsoft Outlook
- Autodesk AutoCAD