Will “Hand Violin Maker” be Replaced By Robots? 🤔
92% Chance of Automation
“Hand Violin Maker” will probably be replaced by robots.
This job is ranked #566 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
Job Details
- The SOC (Standard Occupational Classification) code is 51-7011.00
- The Mean Annual Wage in the U.S. is $ 34,800.00
- The Mean Hourly Wage is $ 16.00
- Currently, there are 97,980 people on this job
☝️ Information based on the reference occupation “Cabinetmakers and Bench Carpenters”.
Also Known As…
- Cabinetmakers and Bench Carpenters
- Woodworker
- Machine Operator
- Framer
- Frame Builder
- Double End Tenon Operator
- Cutter
- Cabinetmaker
- Cabinet Installer
- Cabinet Builder
- Cabinet Assembler
- Woodworking Machinist
- Woodworking Bench Carpenter
- Wood Ski Maker
- Wood Mechanist
- Wood Machinist
- Wood Furniture Assembler
- Wood Cabinetmaker
- Stock Checker
- Smoking Pipe Maker
- Sander
- Router Operator
- Pipe Organ Builder
- Marquetry Worker
- Mantel Craftsman
- Last Model Maker
- Inlayer
- Hat Block Maker
- Harpsichord Maker
- Harp Maker
- Hand Fretted Instrument Maker
- Hand Carver
- Guitar Maker
- Furniture Maker
- Furniture Builder
- Experimental Box Tester
- Custom Stock Maker
- Counter Top Maker
- Chair Mender
- Chair Mechanic
- Chair Maker
- Cabinet Worker
- Cabinet Professional
- Bow Maker
- Boat Oar Maker
- Antique Repairer
- Antique Furniture Repairer
- Alteration Worker
- Accordion Maker
Tasks for “Hand Violin Maker”
- Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools.
- Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
- Establish the specifications of articles to be constructed or repaired or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
- Perform final touch-ups with sandpaper or steel wool.
- Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.
- Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
- Cut timber to the right size and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
- Bore holes for insertion of screws or dowels, by hand or using boring machines.
- Draw up detailed specifications and discuss projects with customers.
- Program computers to operate machinery.
- Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces.
- Match materials for color, grain, or texture, giving attention to knots or other features of the wood.
- Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product.
- Apply Masonite, formica, or vinyl surfacing materials.
- Estimate the amounts, types, or costs of needed materials.
- Reinforce joints with nails or other fasteners to prepare articles for finishing.
- Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture.
- Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
- Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps.
- Design furniture, using computer-aided drawing programs.
Related Technology & Tools
- Slide calipers
- Plate jointers
- T-bevels
- Heated putty knives
- Power saws
- Power planers
- Putty knives
- Edging clamps
- Band clamps
- Pin nailers
- Tool sharpeners
- Marking knives
- Utility knives
- Skew chisels
- Moisture meters
- Jig saws
- Case clamps
- Veneer saws
- Nail guns
- Computerized numerical control CNC routers
- Cam clamps
- Power screwguns
- Biscuit joiners
- Boring machines
- Dividers
- Precision levels
- Cutoff saws
- Reciprocating saws
- Tenon saws
- Quick-release clamps
- Panel routers
- Laminate trimmers
- Sliding table saws
- Hand augers
- Table routers
- Scrapers
- Cold presses
- Random orbital sanders
- Sliding panel saws
- Overarm routers
- Miter clamps
- Jack planes
- Drafting compasses
- Angle dividers
- Personal computers
- Fingernail gouges
- Dial calipers
- Back saws
- Pneumatic nail guns
- Parallel jaw clamps
- Burn-in knives
- Smooth planes
- Spokeshaves
- Drill presses
- Metal punches
- Hand screw wood clamps
- T-squares
- Circular saws
- Awls
- Paint spray guns
- Templates
- Power sanders
- Bench grinders
- Computerized numerical control CNC machining centers
- Steel rules
- Mill files
- Phillips head screwdrivers
- Water wheels
- Layout squares
- Fore planes
- Combination planes
- Bastard flat files
- Power routers
- Bench vises
- Biscuit joining machines
- Portable routers
- Spindle shapers
- Panel saws
- Morticers
- Combination squares
- Plumb bobs
- Block planes
- Jointer planes
- Bench dogs
- Safety goggles
- Line borers
- Locking C-clamps
- Radial drills
- Plunge routers
- Straight screwdrivers
- Machinists' squares
- Bowl gouges
- Paint application brushes
- Hot presses
- Profile molders
- Braces and bits
- Paint application rollers
- Single spindle drill presses
- Mini lathes
- Minipresses
- Locking pliers
- Hand saws
- Measuring tapes
- Jointers
- Power drills
- Scroll saws
- Adjustable jigs
- Metal shears
- Table saws
- Safety glasses
- Thickness planers
- Tenoners
- Bandsaws
- Adjustable hand wrenches
- Digital micrometers
- Claw hammers
- Carpentry chisels
- Profile grinders
- Marking gauges
- Pneumatic staplers
- Disk sanders
- Bar clamps
- Staple guns
- Belt sanders
- Hand sanding blocks
- Dovetail saws
- Protective ear plugs
- Edge banders
- Spring clamps
- Parting tools
- Draw knives
- Chop saws
- Scribers
- Edge sanders
- Shapers
- Trammel points
- Set squares
- Miter saws
- Wide belt sanders
- Lacquer booths
- Wood files
- Viscosity cups
- Rip saws
- Bowl lathes
- Circular planes
- Roughing gouges
- Saber saws
- Mallets
- Radial arm saws
- Wedge clamps
- Wood lathes
- Microsoft Outlook
- Microsoft Excel
- Autodesk AutoCAD
- Computerized maintenance management system CMMS
- Computer estimation software
- Data entry software
- Microsoft Windows
- Computer aided design CAD software