Will “Double End Tenon Operator” be Replaced By Robots? 🤔

92% Chance of Automation

“Double End Tenon Operator” will probably be replaced by robots.

This job is ranked #566 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.

Job Details

The SOC (Standard Occupational Classification) code is 51-7011.00
The Mean Annual Wage in the U.S. is $ 34,800.00
The Mean Hourly Wage is $ 16.00
Currently, there are 97,980 people on this job

☝️ Information based on the reference occupation “Cabinetmakers and Bench Carpenters”.

Also Known As…

Tasks for “Double End Tenon Operator”

Match materials for color, grain, or texture, giving attention to knots or other features of the wood.
Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture.
Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer.
Establish the specifications of articles to be constructed or repaired or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.
Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps.
Bore holes for insertion of screws or dowels, by hand or using boring machines.
Perform final touch-ups with sandpaper or steel wool.
Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications.
Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools.
Estimate the amounts, types, or costs of needed materials.
Design furniture, using computer-aided drawing programs.
Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces.
Trim, sand, or scrape surfaces or joints to prepare articles for finishing.
Apply Masonite, formica, or vinyl surfacing materials.
Cut timber to the right size and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.
Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product.
Reinforce joints with nails or other fasteners to prepare articles for finishing.
Program computers to operate machinery.
Draw up detailed specifications and discuss projects with customers.
Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.

Related Technology & Tools

Carpentry chisels
Wood lathes
Awls
Sliding table saws
Claw hammers
Combination squares
Hand saws
Spring clamps
Hand screw wood clamps
Burn-in knives
Mallets
Random orbital sanders
Adjustable hand wrenches
Band clamps
Safety goggles
Saber saws
Power routers
Draw knives
Panel routers
Radial arm saws
Power screwguns
Shapers
Hand sanding blocks
Tenoners
Overarm routers
Miter saws
Roughing gouges
Bar clamps
Biscuit joiners
Paint application brushes
Profile grinders
Back saws
Dial calipers
T-bevels
Wedge clamps
Locking pliers
Paint application rollers
Hand augers
Heated putty knives
Panel saws
Plumb bobs
Drill presses
Morticers
Veneer saws
Plate jointers
Tool sharpeners
Safety glasses
Parting tools
Marking gauges
Precision levels
Biscuit joining machines
Edging clamps
Minipresses
Bandsaws
Set squares
Quick-release clamps
Mill files
Trammel points
Power planers
Table routers
Jointer planes
Case clamps
Portable routers
Parallel jaw clamps
Circular saws
Pin nailers
Fingernail gouges
Smooth planes
Power saws
Fore planes
Straight screwdrivers
Moisture meters
Protective ear plugs
Tenon saws
Water wheels
Measuring tapes
Edge sanders
Skew chisels
Mini lathes
Cold presses
Hot presses
Layout squares
Miter clamps
Slide calipers
Locking C-clamps
Adjustable jigs
Personal computers
Bowl gouges
Utility knives
Bowl lathes
Combination planes
Staple guns
Dovetail saws
Power sanders
Wood files
Drafting compasses
Belt sanders
Laminate trimmers
Single spindle drill presses
Power drills
Wide belt sanders
Circular planes
Block planes
Metal shears
Steel rules
Line borers
Braces and bits
T-squares
Jointers
Bench vises
Phillips head screwdrivers
Putty knives
Spindle shapers
Disk sanders
Sliding panel saws
Pneumatic staplers
Rip saws
Viscosity cups
Lacquer booths
Radial drills
Bench grinders
Scrapers
Reciprocating saws
Digital micrometers
Plunge routers
Scribers
Spokeshaves
Computerized numerical control CNC machining centers
Pneumatic nail guns
Metal punches
Templates
Machinists' squares
Boring machines
Cutoff saws
Table saws
Marking knives
Scroll saws
Bench dogs
Chop saws
Paint spray guns
Nail guns
Computerized numerical control CNC routers
Bastard flat files
Jig saws
Dividers
Angle dividers
Thickness planers
Profile molders
Edge banders
Jack planes
Cam clamps

Autodesk AutoCAD
Microsoft Outlook
Microsoft Windows
Computer aided design CAD software
Computer estimation software
Data entry software
Microsoft Excel
Computerized maintenance management system CMMS