Will “Global Director Air and Climate Change” be Replaced By Robots? 🤔

1.8% Chance of Automation

“Global Director Air and Climate Change” will not be replaced by robots.

This job is ranked #81 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Job Description

Research, design, plan, or perform engineering duties in the prevention, control, and remediation of environmental hazards using various engineering disciplines. Work may include waste treatment, site remediation, or pollution control technology.

Job Details

The SOC (Standard Occupational Classification) code is 17-2081.00
The Mean Annual Wage in the U.S. is $ 88,530.00
The Mean Hourly Wage is $ 42.00
Currently, there are 52,280 people on this job

☝️ Information based on the reference occupation “Environmental Engineers”.

Also Known As…

Tasks for “Global Director Air and Climate Change”

Obtain, update, or maintain plans, permits, or standard operating procedures.
Prepare hazardous waste manifests or land disposal restriction notifications.
Inspect industrial or municipal facilities or programs to evaluate operational effectiveness or ensure compliance with environmental regulations.
Coordinate or manage environmental protection programs or projects, assigning or evaluating work.
Assist in budget implementation, forecasts, or administration.
Write reports or articles for Web sites or newsletters related to environmental engineering issues.
Advise industries or government agencies about environmental policies and standards.
Serve as liaison with federal, state, or local agencies or officials on issues pertaining to solid or hazardous waste program requirements.
Design or supervise the design of systems, processes, or equipment for control, management, or remediation of water, air, or soil quality.
Prepare, review, or update environmental investigation or recommendation reports.
Develop or present environmental compliance training or orientation sessions.
Prepare or present public briefings on the status of environmental engineering projects.
Monitor progress of environmental improvement programs.
Provide technical support for environmental remediation or litigation projects, including remediation system design or determination of regulatory applicability.
Assess, sort, characterize, or pack known or unknown materials.
Provide assistance with planning, quality assurance, safety inspection protocols, or sampling as part of a team conducting multimedia inspections at complex facilities.
Develop site-specific health and safety protocols, such as spill contingency plans or methods for loading or transporting waste.
Develop proposed project objectives and targets and report to management on progress in attaining them.
Assess the existing or potential environmental impact of land use projects on air, water, or land.
Request bids from suppliers or consultants.
Inform company employees or other interested parties of environmental issues.
Provide environmental engineering assistance in network analysis, regulatory analysis, or planning or reviewing database development.
Advise corporations or government agencies of procedures to follow in cleaning up contaminated sites to protect people and the environment.
Develop, implement, or manage plans or programs related to conservation or management of natural resources.
Prepare, maintain, or revise quality assurance documentation or procedures.
Collaborate with environmental scientists, planners, hazardous waste technicians, engineers, experts in law or business, or other specialists to address environmental problems.
Direct installation or operation of environmental monitoring devices or supervise related data collection programs.
Provide administrative support for projects by collecting data, providing project documentation, training staff, or performing other general administrative duties.

Related Technology & Tools

California bearing ratio CBR testing devices
Supercritical fluid extractors
Centrifuges
Air incubators
Respirometers
Headspace autosamplers
Geoprobes
Ultraviolet water purification systems
Water level recorders
Incubators
Laboratory ovens
Desktop computers
Seismographs
Hydrological current meters
Flame ionization detectors FID
Freeze dryers
Fume hoods
Automatic titrators
Wave gauges
Pitot tubes
Shakers
Colorimeters
Liquid chromatography detectors
Nutrient analyzers
Whole air canisters
Balances
Epifluorescence microscopes
Liquid ring pumps
pH meters
Photometers
Thermal/catalytic oxidizers TCO
Conductivity meters
Gas chromatographs GC
Liquid scintillation counters
Capillary electrophoresis systems
Spectrophotometers
Graphite furnaces
Direct shear testing devices
Argon ionization detectors
Limnological coring drills
Particulate filters
Sampling pumps
Electric pumps
Ultraviolet UV light detectors
Mass spectrometers
Flame emission detectors
Microbics toxicity analyzers
Interferometeric refractormeters
Total organic carbon TOC analyzers
Stem augers
Individual burner air measurement IBAM probes
Solid shear failure testing devices
Sorbent tubes
Mercury/hybrid atomizers
Soil carbon-nitrogen CN analyzers
Luminometers
Ozonators
Consolidometers
Biological oxidizers
Atomic absorption AA spectrometers
Combustible gas meters
Soil modulus failure testing devices
Anaerobic growth chambers
Sample concentrators
Charge-coupled device CCD cameras
Dissolved oxygen meters
Thermocouples
Multi gas detector tubes
Air velocity meters
Notebook computers
Particle counters
Sampling trains
Fluorescence detectors
Stormwater samplers
Electron capture detectors ECD
Universal fractionators
Plasma-mass spectrometers
Microwave digestion instruments
Ion chromatographs
Nitrogen oxide burners
Thermal conductivity detectors
Multiparameter water quality instruments
Scanning potentiostats
Chemostats
Autoclaves
Core drill rigs
Mud rotary drills
Organic carbon analyzers
Gas meters
Environmental probe systems
Limnological core loggers
Ambient air measurement devices
Atomic absorption AA spectrophotometers
Global positioning system GPS receivers
Soil-erodability testing devices
Trace metal analyzers
Fluorescence spectrophotometers
Surface area analyzers
Flow meters
Glove box systems
Laser photometers
Soil electrical conductivity measurement devices

Hazardous materials management HMS software
Microsoft Office
ESRI ArcGIS software
LINDO
Simulation software
Photogrammetric software
Computer aided design CAD software
Maplesoft Maple
Gas dispersion model software
DHI Water and Environment MIKE SHE
ANSYS
Autodesk AutoCAD
Waste management software
Microsoft Excel
C++
Microsoft Project
Fugitive emission leak detection software
ESRI ArcView
HEC RAS
Python
Site remediation management software
Stormwater runoff modeling software
Wind flow modeling software
Ecological risk assessment software
Microsoft Access
Microsoft Word
Autodesk AutoCAD Civil 3D
Regulatory compliance management software
Water flow modeling software
Geomechanical design analysis GDA software
Image analysis software
Formula translation/translator FORTRAN
Hydrologic simulation program fortan HSPF software
Insightful S-PLUS
Environmental health and safety documentation software
Simultaneous location and mapping SLAM
Oil mapping software
Computer aided design and drafting software CADD
WAM software
SofTech CADRA
Bentley Microstation
The MathWorks MATLAB
RockWare MODFLOW
Microsoft PowerPoint
SAS
XP Software XPSWMM
Air dispersion modeling software
Rockwell Automation Arena
Greenhouse gas management software
Material safety data sheet MSDS software
Continuous emission management software
Finite element method FEM software