Will “Flood Control Engineer” be Replaced By Robots? 🤔
1.8% Chance of Automation
“Flood Control Engineer” will not be replaced by robots.
This job is ranked #81 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, plan, or perform engineering duties in the prevention, control, and remediation of environmental hazards using various engineering disciplines. Work may include waste treatment, site remediation, or pollution control technology.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2081.00
- The Mean Annual Wage in the U.S. is $ 88,530.00
- The Mean Hourly Wage is $ 42.00
- Currently, there are 52,280 people on this job
☝️ Information based on the reference occupation “Environmental Engineers”.
Also Known As…
- Environmental Engineers
- Sanitary Engineer
- Regulatory Environmental Compliance Manager
- Marine Engineer CPVEC (Marine Engineer Commercial Passenger Vessel Environmental Compliance)
- Hazardous Substances Engineer
- Global Director Air and Climate Change
- Environmental Remediation Specialist
- Environmental Engineer
- Environmental Analyst
- Chief, Pesticides and Toxic Substances Branch
- Air Pollution Control Engineer
- Water Treatment Plant Engineer
- Water Supply Engineer
- Water Resources Engineer
- Wastewater Treatment Engineer
- Waste Management Engineer
- Solid Waste Management Engineer
- Solid Waste Engineer
- Soil Engineer
- Sewage Disposal Engineer
- Sanitation Engineer
- Reservoir Engineer
- Remediation Project Engineer
- Radiation Protection Engineer
- Public Health Engineer
- Project Manager
- Project Engineer
- Pollution Control Engineer
- Irrigation Engineer
- Industrial Hygiene Engineer
- Hazardous Waste Management Specialist
- Hazardous Waste Management Control Engineer
- Environmentalist
- Environmental Systems Coordinator
- Environmental Scientist
- Environmental Safety Specialist
- Environmental Remediation Engineer
- Environmental Project Manager
- Environmental Planner
- Environmental Designer
- Environmental Coordinator
- Environmental Consultant
Tasks for “Flood Control Engineer”
- Prepare, review, or update environmental investigation or recommendation reports.
- Provide environmental engineering assistance in network analysis, regulatory analysis, or planning or reviewing database development.
- Prepare, maintain, or revise quality assurance documentation or procedures.
- Provide technical support for environmental remediation or litigation projects, including remediation system design or determination of regulatory applicability.
- Obtain, update, or maintain plans, permits, or standard operating procedures.
- Develop, implement, or manage plans or programs related to conservation or management of natural resources.
- Monitor progress of environmental improvement programs.
- Inform company employees or other interested parties of environmental issues.
- Write reports or articles for Web sites or newsletters related to environmental engineering issues.
- Provide administrative support for projects by collecting data, providing project documentation, training staff, or performing other general administrative duties.
- Prepare hazardous waste manifests or land disposal restriction notifications.
- Direct installation or operation of environmental monitoring devices or supervise related data collection programs.
- Collaborate with environmental scientists, planners, hazardous waste technicians, engineers, experts in law or business, or other specialists to address environmental problems.
- Advise corporations or government agencies of procedures to follow in cleaning up contaminated sites to protect people and the environment.
- Develop proposed project objectives and targets and report to management on progress in attaining them.
- Coordinate or manage environmental protection programs or projects, assigning or evaluating work.
- Prepare or present public briefings on the status of environmental engineering projects.
- Develop site-specific health and safety protocols, such as spill contingency plans or methods for loading or transporting waste.
- Develop or present environmental compliance training or orientation sessions.
- Assess, sort, characterize, or pack known or unknown materials.
- Request bids from suppliers or consultants.
- Inspect industrial or municipal facilities or programs to evaluate operational effectiveness or ensure compliance with environmental regulations.
- Serve as liaison with federal, state, or local agencies or officials on issues pertaining to solid or hazardous waste program requirements.
- Advise industries or government agencies about environmental policies and standards.
- Assist in budget implementation, forecasts, or administration.
- Design or supervise the design of systems, processes, or equipment for control, management, or remediation of water, air, or soil quality.
- Assess the existing or potential environmental impact of land use projects on air, water, or land.
- Provide assistance with planning, quality assurance, safety inspection protocols, or sampling as part of a team conducting multimedia inspections at complex facilities.
Related Technology & Tools
- Nutrient analyzers
- Spectrophotometers
- Liquid chromatography detectors
- Chemostats
- Ultraviolet water purification systems
- Laboratory ovens
- Atomic absorption AA spectrophotometers
- Limnological core loggers
- Shakers
- Interferometeric refractormeters
- Mud rotary drills
- Thermal/catalytic oxidizers TCO
- Balances
- Geoprobes
- Conductivity meters
- Flame ionization detectors FID
- Thermal conductivity detectors
- Air velocity meters
- Ion chromatographs
- Anaerobic growth chambers
- Desktop computers
- Soil-erodability testing devices
- Sampling trains
- Atomic absorption AA spectrometers
- Global positioning system GPS receivers
- Liquid scintillation counters
- Soil modulus failure testing devices
- Air incubators
- Fluorescence spectrophotometers
- Glove box systems
- Hydrological current meters
- Soil carbon-nitrogen CN analyzers
- Ambient air measurement devices
- Autoclaves
- Automatic titrators
- Microwave digestion instruments
- Microbics toxicity analyzers
- Notebook computers
- Flow meters
- Liquid ring pumps
- Headspace autosamplers
- Whole air canisters
- Individual burner air measurement IBAM probes
- Colorimeters
- Fume hoods
- Fluorescence detectors
- Ultraviolet UV light detectors
- Ozonators
- Total organic carbon TOC analyzers
- Scanning potentiostats
- Supercritical fluid extractors
- Nitrogen oxide burners
- Particle counters
- Luminometers
- Multiparameter water quality instruments
- Electron capture detectors ECD
- Seismographs
- Particulate filters
- California bearing ratio CBR testing devices
- Electric pumps
- Flame emission detectors
- Water level recorders
- Sample concentrators
- Limnological coring drills
- Multi gas detector tubes
- Biological oxidizers
- Charge-coupled device CCD cameras
- Universal fractionators
- Gas chromatographs GC
- Mass spectrometers
- Sampling pumps
- Thermocouples
- Combustible gas meters
- Solid shear failure testing devices
- Argon ionization detectors
- Consolidometers
- Surface area analyzers
- Soil electrical conductivity measurement devices
- Trace metal analyzers
- Photometers
- Stem augers
- Gas meters
- Dissolved oxygen meters
- Wave gauges
- Core drill rigs
- Stormwater samplers
- Plasma-mass spectrometers
- Centrifuges
- Laser photometers
- Capillary electrophoresis systems
- Direct shear testing devices
- Epifluorescence microscopes
- Pitot tubes
- Sorbent tubes
- Graphite furnaces
- Freeze dryers
- Organic carbon analyzers
- Environmental probe systems
- pH meters
- Respirometers
- Incubators
- Mercury/hybrid atomizers
- Regulatory compliance management software
- Water flow modeling software
- Continuous emission management software
- Microsoft Excel
- Maplesoft Maple
- Finite element method FEM software
- Hydrologic simulation program fortan HSPF software
- Environmental health and safety documentation software
- SofTech CADRA
- XP Software XPSWMM
- Microsoft PowerPoint
- SAS
- Computer aided design CAD software
- Air dispersion modeling software
- Hazardous materials management HMS software
- Fugitive emission leak detection software
- Photogrammetric software
- Image analysis software
- Bentley Microstation
- WAM software
- Computer aided design and drafting software CADD
- Autodesk AutoCAD
- Gas dispersion model software
- Microsoft Access
- ANSYS
- Microsoft Office
- Microsoft Project
- LINDO
- HEC RAS
- Greenhouse gas management software
- Autodesk AutoCAD Civil 3D
- Microsoft Word
- ESRI ArcGIS software
- Stormwater runoff modeling software
- Simulation software
- Geomechanical design analysis GDA software
- ESRI ArcView
- Waste management software
- Site remediation management software
- Python
- Wind flow modeling software
- C++
- Oil mapping software
- Formula translation/translator FORTRAN
- The MathWorks MATLAB
- Material safety data sheet MSDS software
- DHI Water and Environment MIKE SHE
- RockWare MODFLOW
- Ecological risk assessment software
- Simultaneous location and mapping SLAM
- Insightful S-PLUS
- Rockwell Automation Arena